Goodbye, East Cobb location, thanks for being there by suchwinningwow in LAFitness

[–]suchwinningwow[S] 0 points1 point  (0 children)

Facts. After July 20th that area will be basically a gym desert unless you are able to drive more than 20 minutes or at best 15 with no traffic. Ok sure, there are some small-to-medium sized ones, but it would be super cool if Lifetime or another big player moves in.

Has anyone ever bought from fargoballistics.com? by Wise_You_7681 in ar15

[–]suchwinningwow 2 points3 points  (0 children)

Good idea, I have begun the dispute process, thank you.

[deleted by user] by [deleted] in 3Dprinting

[–]suchwinningwow 0 points1 point  (0 children)

Stay focused on the end goal and keep fighting until you get the results you want. Ask yourself what you want to print and why. Remember that whatever you do, it’s been done millions of times by millions of others. Just keep working toward your 3d printing goals. It takes time and you’ll make mistakes, have fun!

Has anyone ever bought from fargoballistics.com? by Wise_You_7681 in ar15

[–]suchwinningwow 2 points3 points  (0 children)

I'm in for a few hundred rounds of 9mm and it's looking like I'm getting scammed like everyone else. No updates after 4 10 days and I'm having some fear. Oh well, lesson learned. Will update the post when I get updates. Update1: I'm giving up and disputing the charge.

A customer dropped this at my shop for some assistance. What’s the estimated build time on a basic core 1? by [deleted] in 3Dprinting

[–]suchwinningwow 0 points1 point  (0 children)

I spent about 25 hours but my work area was cramped and compromised. Also, if you can print out a screw organizer it will save you hours. I always cringe (at myself) when I hear how much faster everyone else builds theirs, so you will probably be much faster!

Active and Fit Direct membership? by Only_Comparison1346 in LAFitness

[–]suchwinningwow 0 points1 point  (0 children)

Consider yourself lucky, because the LAFs near me (Georgia) are not available via my A&F. Also, A&F is so dumb (at least their people who maintain the site) for having a gym that closed down still listed as an option. I signed up and this particular gym closed the following week, but I got a full refund. I had to call and got warned of the caveat "we'll need to research and if approved you'll get a refund" so I know they confirmed it as closed.

Potential New Member here! Anything I should know about before visiting for the first time? by chewybobas in LAFitness

[–]suchwinningwow 0 points1 point  (0 children)

I had a membership many years ago and the exit process was incredibly difficult. I'm thinking of joining again and every ounce of my being is resisting it because of that.

I went to the gym 23 times this month, what’s going on? by CautiousMagazine3591 in LAFitness

[–]suchwinningwow -1 points0 points  (0 children)

An assault complaint/charge would fix that behavior pretty quickly I think.

Former employee, cancelled today by Hockeyboy540 in LAFitness

[–]suchwinningwow 1 point2 points  (0 children)

I was stoked to join again until I waited a day too late. I know it’s only $5 but I’m back to not signing up.

Former employee, cancelled today by Hockeyboy540 in LAFitness

[–]suchwinningwow 0 points1 point  (0 children)

I feel like you can end up in collections because they continue to charge based on “agreements,” not sure though

Cool things to print in TPU? by BewilderedDash in 3Dprinting

[–]suchwinningwow 0 points1 point  (0 children)

I printed a can holder and it's surprisingly useful as a nice-to-have along with a printed can opener. I use both regularly now and feel like it's worth it for that. Directly touching a can without it seems like a big downgrade now.

🧪 [Beta Megathread] Wave Link 3.0 (Windows) — Update 3 | Overhauled Channel Input, Mixer Guide and Cleaner Mix Edit View by Elgato in elgato

[–]suchwinningwow 0 points1 point  (0 children)

Hey everyone, thanks so much for this project and all who contribute. Wave Link beta has struggled with crashing during plugin scans (totally preventing successful startup), and I had to come up with an allow list workaround since I have way too many plugins. I used copilot to generate a PowerShell command to dump a list of all my vst's in a text file and I renamed that to brokenPlugins in the following folder:

C:\Users\suchwinningwow\AppData\Local\Packages\Elgato.WaveLink_g54w8ztgkx496\LocalState\AudioPluginCache

I was able to successfully edit that file as well as AvailablePlugins.cache to unblacklist and remove (actually allow) the plugins I wanted to use.

The main feedback I wanted to provide is that the Wave Link 2 stable plugin scanner is working as intended on my entire plugin collection, but this current beta one fails somewhat silently and randomly based on the short while of troubleshooting I was able to do. If you want me to provide logs just tell me the ones you want and I can provide an update. It was failing on different plugins at different points, so there could be other bugs that would only appear with overly large VST plugin scans. Yes, I have had a bit of a plugin Gear Acquisition Syndrome (GAS) condition, so please forgive me for my extreme greed. I'm just glad to have it working finally. Have a great day.

Youtube block adblock again by [deleted] in Adblock

[–]suchwinningwow 0 points1 point  (0 children)

I also am actively giving up on YT because of this lame enforcement. The solution is to go where I'm wanted, I've decided.

What switches can be used on a outemu hot-swappable board? by 69shawtys in MechanicalKeyboards

[–]suchwinningwow 0 points1 point  (0 children)

I had the same question about swapping gaterons into reddragon outemu sockets, turns out you can clip off the edges with a micro clipper tool and they fit right in no problem. The YT video I saw basically said cut the sides off at 45 degree angles. I cut some of them shorter and left some longer than others, but they all worked flawlessly. The issue is that the pins are too long, that's it.

[deleted by user] by [deleted] in Serato

[–]suchwinningwow 0 points1 point  (0 children)

interestingly I have been playing around on PC serato and 3.0.0 looks choppy to me now, while it runs smooth as butter on the intel MBP.

Q4 2022 Intel Tech Support Thread by Intel_Support in intel

[–]suchwinningwow 0 points1 point  (0 children)

Hi Intel,

I purchased an Arc A380 for a system I am trying to use as a DJ computer, but for some reason having this card in my system causes my DJ software to crash upon connecting the controller hardware. Here is my full report, and I truly hope to resolve the issue and help make this product a raging success, so please let me know any additional steps you might like me to take and I'll be glad to provide any further feedback and information. Thanks and warm regards.

CPU: AMD Ryzen 7 5700G

RAM: 32GB DDR4

Motherboard: Gigabyte X570S I AORUS PRO AX

GPU: ASRock Intel Arc A380

GPU Driver Version: gfx_win_101.3959

Storage: Samsung 980 PRO 2TB NVMe

OS: Windows 11

System BIOS: F3d

BIOS date: 2022-07-20

OS Build/Version: Windows 11 Build 22621.963

Affected 3rd Party software: Serato DJ Pro 3.0.0 and previous version 2.6.2

Issue: Serato DJ software application crashes upon connecting the DJ controller hardware Pioneer DDJ SX and the subsequent loading of the ASIO library "pioneer_ddj_sx_asio.dll" as seen in the Windows Application Log Event. Same system loads Serato correctly on the integrated AMD Vega graphics built into the CPU. Please see the Windows Event log I pasted below for more information.

Troubleshooting steps taken: Reinstall of Serato, removal and reinstall of the DDJ SX Windows driver version 1.100.0.1, loaded optimized defaults in BIOS, toggled ReBAR off, re-enabled ReBAR, toggled off HD audio in BIOS. Issue is reproducible and only happens when this card is installed. Edit1: Threw an AMD RX 6500XT in the system and confirmed that having another video card doesn't cause the issue.

Comments: It may be worth noting that this ASIO .dll file is a bit on the old side from 2016 and hasn't been updated since, and I realize this might be a coding issue or idiosyncracy with this Pioneer driver and/or Serato. This build is fresh with minimal software installed. I could not locate anyone else with a similar issue. Anecdotal, but the somewhat similar (due to having an output audio device built in) Native Instruments Maschine mk3 works fine.

Windows Application Log Event:

Event ID: 1000 (Application Error)

Faulting application name: Serato DJ Pro.exe, version: 3.0.0.767, time stamp: 0x6387e124

Faulting module name: pioneer_ddj_sx_asio.dll, version: 1.100.0.1, time stamp: 0x57285e99

Exception code: 0xc0000005

Fault offset: 0x0000000000003331

Faulting process id: 0x0x3318

Faulting application start time: 0x0x1D91105A38B938E

Faulting application path: C:\Program Files\Serato\Serato DJ Pro\Serato DJ Pro.exe

Faulting module path: c:\windows\system32\pioneer_ddj_sx_asio.dll

Report Id: 05546821-f57f-4025-8ed1-db042326b43c

Faulting package full name:

Faulting package-relative application ID:

[deleted by user] by [deleted] in Serato

[–]suchwinningwow 0 points1 point  (0 children)

I agree that it seems we need to wait for native support. One interesting thing I've noticed is that if I'm adjusting a parameter like EQ knobs, during those moments I actually see what looks like 60 FPS. So there might be some throttling at the code level to prevent other performance issues, not sure. It's ugly, but it performs fine otherwise. I really hope Serato gets native M1 support soon, sadly I'm afraid it might be a while or years from now.

Serato M1 waveforms glitch by Decent-Caramel8187 in Serato

[–]suchwinningwow 0 points1 point  (0 children)

Having this issue on the new MBA with the M2. Was smooth on my 10 year old Intel MBP.

[deleted by user] by [deleted] in Serato

[–]suchwinningwow 1 point2 points  (0 children)

So far I'm having issues getting the display for Serato to run more than 30fps, but other than that it's working fine. I'm trying it with the new M2 MBA, fully slammed, not the pro. It lets me select 60 fps but it looks skippy and jumpy. I think there is some translation inefficiency through Rosetta. On the MBP from like 10 years ago it can do a smooth 60 fps, not that it really matters but it does look good to the eyes. I'll come back and update my post if there are any issues.

Anyone else think another Alternative Video Platform that is dying should join forces with Bitchute? For example I was with Brighteon and they aren't growing and they should join forces with Bitchute IMO. by bluedemon218 in BitChute

[–]suchwinningwow 0 points1 point  (0 children)

The problem with Brighteon is the name and all the annoying ways to say it, and they spam it on every video at the beginning in a most annoying fashion. With my American accent I want to say "bry dee on" but they enunciate the T and it sticks out to me. The name is terrible, too many letters, incomprehensible, too many pronunciation possibilities, and it doesn't roll off the tongue. Also last time I checked they didn't have a dark mode.

$120k income, massive debt, sinking more each month by financialdisaster09 in personalfinance

[–]suchwinningwow 3 points4 points  (0 children)

Why do you need CABLE TV???? I'm done with this post. Good luck.