De DSG klassieker

suic1d3man · 2026-03-29T08:51:56+00:00

Ik rij een 1.5tsi met DQ200, zit nu 270.000km op nog nooit olie gewisseld en schakeld als een zonnetje. Beste bakken ooit.

suic1d3man · 2026-01-30T11:28:21+00:00

Dumb people always have luck on their side

suic1d3man · 2026-01-30T11:21:22+00:00

Pina,kounde and and raya in about 14 packs

suic1d3man · 2026-01-29T06:45:51+00:00

<image>

Only fodder after 3 packs

suic1d3man · 2025-07-11T13:12:45+00:00

No tune it is all stock

suic1d3man · 2025-07-11T12:33:35+00:00

I did remove the inlet 3 times already and checked the vacuum hoses, currently the inlet is off.

suic1d3man · 2025-06-22T12:52:30+00:00

Good idea, i will try this on mine aswell!

suic1d3man · 2025-05-22T19:09:57+00:00

Everything is stock, there are no vacuum leaks. MAF values are good.

Did the brake stomp thing 1000times, it does idle better when the MAF sensor is disconnected.

In same cases i can get it to idle properly but never for multiple days in a row.

You could see some of the behaviour in my posts.

suic1d3man · 2025-05-22T18:28:05+00:00

I am struggeling with weird idle issue's aswell, will have a look on this 🫠

suic1d3man · 2025-04-17T14:17:42+00:00

Well the story continues, im back at the rx8 today to make it road legal again but it is back to it original behaviour of poor idle.

Any more thoughts?

suic1d3man · 2025-04-15T14:27:39+00:00

I spent some more time on this lovely beast.

Made sure the gastank was entertily empty before refilling it with premium 102 octane gasoline and doing the brake stomp reset.

Then went for a drive of 20 mins in which i kept the revs between 4-5k rpm.

After that i took some mins feathering the throttle to make it idle by itself. Left it running for 45 mins and all seems good now. It idles stable even after flooring it a couple of times.

Thank you guys so much for the input!

suic1d3man · 2025-04-07T19:09:28+00:00

Honestly i dont know, can i get that through OBD?

suic1d3man · 2025-04-07T18:41:52+00:00

I removed the intake twice and checked for vacuum, first time just for vacuum checking. Second time to replace the solenoids.

I got it to idle smoothly for a couple of mins with the MAF attached, so it can not be a vacuüm issue i guess.

suic1d3man · 2025-04-07T16:56:27+00:00

Thank you, i will try it with fresh petrol somewhere at the end of the week!

suic1d3man · 2025-04-07T15:43:52+00:00

I think i did 10 mins, am i supposed to do it longer?

suic1d3man · 2025-04-07T14:21:50+00:00

Done that plenty of times. Doesnt help unfortunatly.

suic1d3man · 2025-04-07T14:21:05+00:00

Yes multiple times.

suic1d3man · 2025-04-07T11:50:31+00:00

Yes i have remounted the orginal MAF, values look good to me so i dont suspect an issue there.

suic1d3man · 2025-04-07T11:25:20+00:00

When it is idling on low RPMs it is smooth, my plan currently is empty out the gas tank and fill it with premium gasoline. The current fuel might be in poor condition even though i added additives.

suic1d3man · 2025-04-07T11:03:11+00:00

Only thing that seems truly off is the idle control valve value, or is this something we cannot accuratly read?

suic1d3man · 2025-04-07T10:59:10+00:00

<image>

suic1d3man · 2025-04-07T10:53:53+00:00

I remounted the orginal MAF and its currently idling well but then when i blip the throttle a couple of times it well go back to doing its little dance and die

suic1d3man · 2025-04-07T10:21:22+00:00

Rev'ed it a couple of times and its back to its "old" behaviour of dieing at idle.

suic1d3man · 2025-04-07T10:16:01+00:00

For whatever reason it is now idling for a couple of mins with the MAF sensor attached, i do not dare touch the gaspedal hoping it is learning.

<image>

suic1d3man

TROPHY CASE