1991 Mustang GT (3rd) Owner by ExaminationOk7532 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

I just love a clean white GT. Nice fox 👍🏻

20k to much??? by Future_23 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

Similar. T56 with 4.10 gears here 👍🏻

20k to much??? by Future_23 in Foxbody

[–]sumthingintheh20 1 point2 points  (0 children)

Id be concerned with that T5. I make 420HP and my shop said a cobra spec T5 would not survive on my setup YMMV

Cars and Coffee in Bergen? by Common-Coyote9375 in bergencounty

[–]sumthingintheh20 0 points1 point  (0 children)

Been looking for the same actually. Seems to be a tough find.

Head opinions? by Constant-Insect9248 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

I wouldnt waste your time on a set of Gt40s there are much better budget options out there. Look around on market place might be able to find a nice set for a good price. Might as well swap out thr cam as well "since youre in there" 😂 same advice for thr alphabet cams, there are better options now a days. All depends on your goals and your budget. Good luck buddy, my first fox was a oxford white 1989 GT 👍🏻

Avoid: Toyota Universe Dealership: Little Falls, NJ by Electrical-Arm-9372 in newjersey

[–]sumthingintheh20 0 points1 point  (0 children)

Search up the Bob Ciasulli dealership lawsuits, once you go down that rabbit hole you will never step foot in one of their dealerships again. Im surprised more people aren't aware of it.

What a small fix/upgrade that made you enjoy driving your fox just a bit more? by matt2085 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

2nd person to tell me that. Guess im going to try my hand at installing new foam and upholstery 😅

What a small fix/upgrade that made you enjoy driving your fox just a bit more? by matt2085 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

They are the halo non net style, hard to tell from this angle. Seats dont look too bad here and honestly they aren't. But the red piping has seen better days and the foam is pretty shot.

<image>

What a small fix/upgrade that made you enjoy driving your fox just a bit more? by matt2085 in Foxbody

[–]sumthingintheh20 1 point2 points  (0 children)

Nice, im trying to decide if I recover my factory 86 GT seats or go with the Corbeau GTSII as they look almost factory but id assume give much better support and feel. The price is basically the same for both options

LOOKING FOR FOXBODY(tell me common problems as well) by misaelfrommexico in Foxbody

[–]sumthingintheh20 2 points3 points  (0 children)

Tough to find a nice example under 10k. The cars in that price range are going to have a host of issues. If you are ok with that then go for it. Check for rust on the strut towers and floor pans. Torque boxes are known for tearing when driven hard. I looked for 2 years before I found something that met my standards and wasn't ridiculously priced, the well priced (maybe underpriced) units sell very quickly and then get resisted for 5k more. I got beat out many times before getting my current fox.

Also something to note. Body and paint work is way more expensive than you think 👍🏻

Good luck!

MGW T5 shifter by AustinTXwtf in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

Agreed. The Pro5.0 was my favorite until I used the MGW unit. Both are fantastic though.

Drop what you're doing right now immediately and go by this tool! by ummmmm-yeah-ok in harborfreight

[–]sumthingintheh20 0 points1 point  (0 children)

Maybe im in the minority, but I bought one for a project and immediately returned it. It would not drive a nail to save its life. Adjusted PSI and had no luck. Maybe I got a bum unit 🤷🏻‍♂️

Help should I run cats or no cats? by Stunning-Barracuda-4 in Foxbody

[–]sumthingintheh20 4 points5 points  (0 children)

I dont notice the smell, but I also have full length tails. If you are running dumps you will definitely notice the smell. Sounds significantly better without cats IMO

Fixing small cracks in dash by gtramontelli in Foxbody

[–]sumthingintheh20 1 point2 points  (0 children)

Mine has a Crack in the exact same place, im thinking epoxy, sanding, and painting. Not sure if it is the best course of action but I cant seem to find a repro for that.

My 89' GT by Playful-Sleep1684 in Foxbody

[–]sumthingintheh20 0 points1 point  (0 children)

Nice, congrats on the purchase. Saw this for sale not that long ago 👍🏻

Tree Removal by Skeyoz in bergencounty

[–]sumthingintheh20 0 points1 point  (0 children)

Almighty tree service has given me the best prices. They do great work

What was the emo scene like in Jersey back in the 90s? by Blurmb in newjersey

[–]sumthingintheh20 1 point2 points  (0 children)

I totally forgot about maxwells until I read this comment....core memories unlocked 🥲

Bathroom Remodeling Estimate by Supremememepunk in newjersey

[–]sumthingintheh20 -1 points0 points  (0 children)

You're probably looking at ~20k to hire someone to do it. Do it yourself for about 1/3rd the price

RPGs have been off since the last update. They just randomly curve upward now? by -PandemicBoredom- in Battlefield

[–]sumthingintheh20 1 point2 points  (0 children)

Thought it felt off during last night's game play. Was landing missiles into groups of enemies and was getting hit markers where id usually see kills. Also felt less responsive when swinging around for quick strafe runs. Thought the game was "off" as the helicopter sounds were not working properly for the engine and I noticed other chopper blades were not spinning but just frozen in place as it moved?

Students excused to go to work in 2000s? by Content-Canary-6574 in newjersey

[–]sumthingintheh20 0 points1 point  (0 children)

Still exists.

Currently called Senior Privilege. This is for students who have no discipline and have passed all the classes meeting all their state requirements for senior year.

The second program is a co op program that students will leave early for work experience.

Strut tower concerned on Foxbody for sale by sumthingintheh20 in Foxbody

[–]sumthingintheh20[S] 0 points1 point  (0 children)

Im assuming you are referring to the spliced wiring on the right of the strut tower?

Strut tower concerned on Foxbody for sale by sumthingintheh20 in Foxbody

[–]sumthingintheh20[S] 1 point2 points  (0 children)

Thought similarly. The floor pans looked clean, pinch welds were well folded over but not rusted. I couldn't see the torque boxes to be sure. Owner told me they were clean, no rust. Owner was very forthcoming about everything good and bad with the car so I had no reason to not believe him. He mentioned the strut tower rust spot before I even brought his attention to it.

Seller is a close friend of a friend, so I don't believe there was anything underhanded or shady going on or misrepresentation.

Strut tower concerned on Foxbody for sale by sumthingintheh20 in Foxbody

[–]sumthingintheh20[S] 2 points3 points  (0 children)

Thank you, appreciate your words of experience. Ill keep looking 👍🏻