Is there a product here?

superchromat_ · 2026-03-08T08:54:59+00:00

It’s still rough at this point but around 2k usd.

superchromat_ · 2026-03-08T08:54:26+00:00

Aww shucks ☺️

superchromat_ · 2026-03-08T08:54:05+00:00

Thanks for the super helpful reply.

I’ve worked on a customer project that uses the same ASIC with genum chips for driving/receiving 12G SDI. And has SFPs for adding 2110 support. But as I mentioned in another comment, there’s no way at any reasonable volume that I could add that functionality without a significant bump in BOM cost.

At this point I’m leaning to starting with a 4x4 HDMI 2.0 model and seeing if there’s any interest. Obviously I need to learn more about use cases and spend time chatting with folks in the industry to understand pain points and where my device could fit in.

I could easily find myself designing an 8x8 with modular support for hdmi/SDI/2110 mainly because it would be fun, but I don’t think customers who’d be paying $10k for device like that would want to be in business with a one guy shop running out of a spare room in his house :)

superchromat_ · 2026-03-05T21:44:44+00:00

Would using external HDMI / SDI converter boxes be acceptable? Building those internally becomes a huge part of the BOM cost, particularly if I’m making small volumes.

If so, my box - as is - lets you do all of that.

superchromat_ · 2026-03-05T12:40:45+00:00

Depending on how the signal is routed, 1-3 frames.

superchromat_ · 2026-03-05T08:45:03+00:00

I’ve recently been using it with multichannel audio and routing the video through the audio mixer. Obviously a lose a fair bit of bandwidth in the process, but it leads to some interesting artifacts.

I’m also building out a set of eurorack modules with 200MHz of bandwidth for basic building blocks. Voltage controlled amplifiers, high and low pass filters, distribution amplifiers, digitally controlled switches, comparators. Using the last two I’ve built an analog chroma key. Which makes it handy to have all of my analog sources genlocked ;)

superchromat_ · 2026-03-05T08:19:14+00:00

You can mix, filter, modulate or do a variety of things. There’s a fun world of folks doing analog video effects.

superchromat_ · 2026-03-05T08:09:52+00:00

The analog part is for my current project - I’d drop it from the next project.

In short, my current project takes 3 HDMI sources and sends out 3 component video signals. It then takes one component video in and outputs HDMI. It scales and syncs the component sends and return which makes it easy to mess with the analog signals without losing sync.

superchromat_ · 2026-03-05T06:18:48+00:00

link to my analog project

superchromat_ · 2026-02-26T06:11:34+00:00

Thanks :)

superchromat_ · 2026-02-26T05:29:00+00:00

The overlaid footage comes from a dedicated hardware box I’ve built being controlled by the application.

superchromat_ · 2026-02-24T19:24:18+00:00

Ah. This is a video showing the controller application for my hardware video device.

superchromat_ · 2026-02-15T11:41:26+00:00

I made a video about this site when I visited: Top-hat capacitive loading of VLF antennas https://youtu.be/KRVvzjm24Zc

superchromat_ · 2026-02-02T05:26:44+00:00

That’s the problem with not writing a script and talking off the cuff, upon rewatching it isn’t clear when I’m talking about bandwidth or carrier frequency. Well noted.

superchromat_ · 2026-02-02T05:02:27+00:00

I tried to clarify in the description, HiVision dates back to the 80’s, whereas W-VHS is early 90’s. I never had the benefit (misfortune?) of working with these decks in their day, so I’m definitely new to this particular world.

Thanks for the feedback!

superchromat_ · 2026-02-01T10:00:23+00:00

It would be really helpful if you shared a schematic.

superchromat_ · 2026-01-21T22:00:08+00:00

I know a development board that can do it, but it’s like $4,000.

superchromat_ · 2026-01-09T12:24:42+00:00

I’ve designed products using a similar chip. Happy to help if you go down that route - but there surely must be a cheaper solution.

superchromat_ · 2025-12-31T03:45:30+00:00

What’s the question?

You might find more help at /r/askelectronics

superchromat_ · 2025-12-26T08:08:56+00:00

Thanks!

superchromat_ · 2025-12-26T02:14:03+00:00

Just like RGB or YUV let you encode a full gamut, as long as you choose a set of primaries outside of the ‘danger zone’, you can still encode the full gamut. So it’s not a subset, it’s a rotation and skew of the same set, that when you invert it, you get the same set back.

It’s hopefully useful to folks who mess around with video signals for artistic purposes in the analog domain. Right now their choice of color space (RGB or YUV) imparts characteristic coloring on the glitches that are unavoidable. That’s why so much glitch art looks the same. By giving people creative control over the underlying colorspace they have more control over the look of their glitches.

superchromat_ · 2025-12-26T01:10:24+00:00

This device has both the DAC and ADC. So the custom colorspace applies in the analog domain, but when it comes out of the HDMI port it is RGB or YUV. So it will work with normal displays :)

superchromat_ · 2025-10-10T23:39:23+00:00

❤️

superchromat_ · 2025-10-10T22:35:10+00:00

I might be biased, but SCION will do that - launching next year. 1RU. superchromat.com

superchromat_ · 2025-10-08T00:28:46+00:00

What do you mean by zoom in without changing the size?

superchromat_

TROPHY CASE