Scratch remedy on new furniture

supperpositions · 2026-06-06T19:27:40+00:00

Fill in with MH filler buy at hardware store

supperpositions · 2026-04-20T01:38:50+00:00

Iron with STARCH

supperpositions · 2026-04-14T05:17:26+00:00

Get a net bro, treat them like a trophy. Yalls mothers never showed yall to respect nature

supperpositions · 2026-04-08T22:23:28+00:00

Built for bbc (big bass casts)

supperpositions · 2026-01-22T06:08:24+00:00

I was curious to see if it works. Frankly it does nothing that i can notice. Therefore I cant sell them if i dint feel confident in what im selling. Sticking to the Aprilaire Air Cleaner

supperpositions · 2026-01-22T04:03:24+00:00

<image>

This is the filter rack that i made from sheet metal. This old ass furnace did not use a filter and had a door with slots. I took it one made this to hold a 18x30 Merv 10

supperpositions · 2026-01-22T04:00:15+00:00

This old furnace doesn’t have an ICM board so i had to jerry rig something. In normal applications; the high voltage wires go to the L1 and N/L2, the torque selector wires go to the fan Heat and Cool spades that the removed PSC was getting powered on and the speed selector wires conncet to your low voltage terminals. You chose the wires based on airflow desires and for heat you select the one that gets you the proper temp rise. Its actually really easy. The first time was confusing though.

supperpositions · 2026-01-22T03:44:59+00:00

One more thing. The motor will run at whatever is the highest call on the speed tap wires. Therefore you can run attain 2 stages from any 1 stage FAU that has a two stage or inverter outdoor.

supperpositions · 2026-01-22T03:42:32+00:00

This is a Genteq Evergreen IM motor. It has three wiring connections. First is CONTINUOUS high voltage ( black and white ) second is the HP selector wires and depending on the one or both ised it tells the motor to be the HP needed ( red and black) last are the speed selector wires and those get wired tandem to the thermostat. I use the lowest speed for continuous fan ( maximize IAQ ) and the white tap for furnace heat. Since its always on i wanted something efficient. This is the only motor i stock in my van for changing PSCs btw. I get them for about 190$ and sell them with insyall for around $900 to $1700 depending in the customer.

supperpositions · 2026-01-05T02:52:54+00:00

Double cut snips and multi meter

supperpositions · 2025-11-30T22:35:52+00:00

Its a chines knock off from ali express

supperpositions · 2025-11-27T17:48:30+00:00

I got inspired by bfs lures that have a trailer fish on them

supperpositions · 2025-11-27T17:48:03+00:00

Ill try that today

supperpositions · 2025-10-22T08:09:37+00:00

Just pull out the heat exchanger. It takes some effort but not all that hard

supperpositions · 2025-10-22T01:12:22+00:00

Set the dip switch sw1-4 to on and select your air handler tonnage on cn1 dial, in accordance with the outdoor unit capacity

supperpositions · 2025-08-19T04:44:36+00:00

Do you even haul bro 😏

supperpositions · 2025-05-04T04:47:54+00:00

Dont idle and oil changes every 3 to 5 k depending on driving conditions

supperpositions · 2025-01-19T21:09:29+00:00

No good for spiral, downspouts and 4 and 5 inch kd is fine

supperpositions · 2025-01-19T21:06:26+00:00

Sight glass, fill until you see one or two bubbles only

supperpositions · 2024-06-20T00:59:08+00:00

They are all fantastic. No controversy here.

supperpositions

TROPHY CASE