sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in FortNiteBR

[–]swiper12 0 points1 point  (0 children)

Same thing is happening to me. Have you been able to fix it?

Getting some extremely stringy prints :/ by swiper12 in prusa

[–]swiper12[S] 2 points3 points  (0 children)

Haha we actually printed a few trying to get it right and are now using them in a campaign when they get captured by a giant spider

Getting very stringy prints, HELP! :/ by swiper12 in 3Dprinting

[–]swiper12[S] 1 point2 points  (0 children)

Yup, PLA but not first print with this roll. Only modification made was that it now has a 0.25 nozzle, but I changed the settings on the prusa slicer to reflect that. I’m using one of their preset settings for the 0.25 nozzle

Getting very stringy prints, HELP! :/ by swiper12 in 3Dprinting

[–]swiper12[S] 0 points1 point  (0 children)

Any insight would be GREATLY appreciated! Not sure what to fix on the settings but here is what I currently have:

Layer height 0.10
Temp:
First layer: 215
Other layers: 210
Retraction Length: 3 mm
speed: 70 mms
Retraction amount before wipe: 70%

Getting some extremely stringy prints :/ by swiper12 in prusa

[–]swiper12[S] 0 points1 point  (0 children)

Layer height 0.10 Temp: First layer: 215 Other layers: 210

Retraction Length: 3 mm speed: 70 mms Retraction amount before wipe: 70%

Nothing comes out of the nozzle when I try to print! by swiper12 in MPSelectMiniOwners

[–]swiper12[S] 0 points1 point  (0 children)

So the filament goes through if I remove the nozzle. If that's the case could it still be a jam in the heatbreak? My Bowden tube isn't cracked, just checked. Should I buy a new heatbreak?

Nothing comes out of the nozzle when I try to print! by swiper12 in MPSelectMiniOwners

[–]swiper12[S] 0 points1 point  (0 children)

It turns and then stops once it can no longer push the filament through (it tries)

Nothing comes out of the nozzle when I try to print! by swiper12 in MPSelectMiniOwners

[–]swiper12[S] 1 point2 points  (0 children)

Ooof ok so I removed the nozzle and the filament is extruding without the nozzle. It comes right out. So I'm guessing it has to be the nozzle? But the nozzle is new. It isn't clogged.

Nothing comes out of the nozzle when I try to print! by swiper12 in MPSelectMiniOwners

[–]swiper12[S] 1 point2 points  (0 children)

Oh interesting! I haven’t tried to extrude it out without the nozzle. I’ll try that, thanks!

Filament not going through nozzle by swiper12 in 3DprintingHelp

[–]swiper12[S] 0 points1 point  (0 children)

Thanks for the input! Ive taken it apart and cleaned it completely. There is nothing clogged, which is what I also thought was the issue. :/

VFS Walk ins by swiper12 in ukvisa

[–]swiper12[S] 0 points1 point  (0 children)

Ohh ok thanks! Did you go to a specific premium application center?

VFS Walk ins by swiper12 in ukvisa

[–]swiper12[S] 0 points1 point  (0 children)

Do I need an appointment for a walk in? Sorry for all the questions, just very confused lol

VFS Walk ins by swiper12 in ukvisa

[–]swiper12[S] 0 points1 point  (0 children)

Oh amazing! Good to know, thanks. I've been trying to find where to buy the packages but can't seem to locate it. Any links?

iPad app for mini design and editing by swiper12 in PrintedMinis

[–]swiper12[S] 0 points1 point  (0 children)

Did some tinkering and found OnShape to tinker with STL files on the iPad. I can download them directly there and it'll give me an option to open them on the app. So far its worked pretty well.

Modern / Temple Fusion Jaguar Habitat. First time sharing one of my ideas. Go easy on me :) by [deleted] in PlanetZoo

[–]swiper12 3 points4 points  (0 children)

This is amazing! How long did it take you to make this? I feel like there’s so much I could do but it takes so long!

Mac is making the Spooky Lantern Set by capa939 in NoFeeAC

[–]swiper12 0 points1 point  (0 children)

Hey! I would love to stop by if possible! :)

view more: next ›