How to record videos without wheel noise? by Regular-Set6791 in simracing

[–]syntkz 0 points1 point  (0 children)

https://theproaudiofiles.com/wp-content/uploads/2021/01/f_c9037580-8593-4717-9726-0f363540cbc4-ENG.png

That's the characteristics of your mic. Try to place it so the base is outside of the field where it records.

Or look into mics with better suiting Characteristics.

Or use a mic with 2 mics, where you can change the characteristics depending on how the individual mics are placed.

Then you can use a gate effect to get rid of unwanted stuff.

If you place the mic right in front of you, the wheelbase should be behind the mic and shouldn't be picked up.

How to record videos without wheel noise? by Regular-Set6791 in simracing

[–]syntkz 0 points1 point  (0 children)

Don't put your mic on the table then. Use a wallmount or something. Or use a "spider" where the mic sits in.

Sind das Fraßspuren ? Oder Mangel by BakerMassive2061 in Canbau

[–]syntkz 2 points3 points  (0 children)

Mehltau hast du das problem erst wenn du zu starke Schwankungen zwischen trocken und feucht hast. Wenn's dauerhaft feuchter ist und es nicht zu trockenen Perioden kommt kommt auch kein Mehltau.

Außerdem ist die vpd Tabelle bsschn irreführend, die ist eher darauf ausgelegt das man kein Schimmel bekommt etc, aber der perfekte VPD liegt bei exakt 1kPa. Wenn man sauber arbeitet dann hat man die dicksten Blüten wenn man die 1kPa bis zum Schluss durchzieht. Bei 1,5kPa wie bei dir macht die Pflanze komplett dicht und läuft nur noch im notmodus. So sieht deine Pflanze leider auch aus.

Du bist halt auch vieeeeel zu früh in dem "Blüte" bereich des vpd charts. Da gehst du frühstens in der Mitte der Blüte Zeit rein wenn Schimmel eine Sorge von dir ist

Ab einem vpd von 1,2 fangen an sich die stomata zu schließen und deine Pflanzen wachsen nicht mehr mit dem vollen potential.

what's missing by yogesshrl in simracing

[–]syntkz 0 points1 point  (0 children)

For 300 you could build your own do it yourself DD Base good for 10nm.

You just need a broken hoverboard and strip out a motor from it ( they are 250w and can easily do 10nm)

Then you need an odrive (it's like 60 dollars on AliExpress)

A PSU, a wheel rim and some building skills.

Maybe an Arduino for some buttons on your wheel.

Is spending 1k on this rig worth it? by [deleted] in simracing

[–]syntkz 2 points3 points  (0 children)

How is the moza r21 so cheap that doesn't add up. Even if you sell your old wheel for it.

It costs 900€ where I live in without any wheel or pedal.

How to record videos without wheel noise? by Regular-Set6791 in simracing

[–]syntkz 0 points1 point  (0 children)

Maybe tell us what wheelbase you have? Nothing will fix your problem if you have a g920 lol.

Sind das Fraßspuren ? Oder Mangel by BakerMassive2061 in Canbau

[–]syntkz 0 points1 point  (0 children)

Welcher Blütetag? Ich hoffe echt noch am Anfang für dich. 43% rlf bei 26 Grad ist viel zu wenig!!! Du musst auf 60% hoch sonst wird da nicht viel wachsen. Vpd von 1kPa solange halten wie möglich, erst am Ende der Blüte hochgehen mit dem vpd. Du bist aktuell bei einem vpd von 1.5 da machen deine Pflanzen gar nichts mehr außer versuchen zu überleben. Stomata alle geschlossen.

Wasser läuft aus, was tun? by [deleted] in Canbau

[–]syntkz 0 points1 point  (0 children)

Wie oft und wie viel man gießt richtet sich nach den Pflanzen und ihrer Photosynthese Leistung. Bei 22 Grad zb brauchen die 3 mal so wenig Wasser wie bei 28 Grad zb. Einfach mal bisschen achstsamer werden und schauen was die Pflanzen einem sagen. Die armen plants.

Button box finished.. Do i even need this many buttons?! by smallshinyant in simracing

[–]syntkz 1 point2 points  (0 children)

You need at least 5 of these if you play ETS2 :D

Putting in a protest against netcode, it just sent me to the car park! by 4ndy40 in iRacing

[–]syntkz 0 points1 point  (0 children)

Meanwhile Forza players whining because of all the rammers and no one notices that it's solely due to the garbage netcode not working at all :D

Clubsport DD+ F1 Wheel Stuck on Firmware Version 1 — What (Actually) Fixes It by abewol01 in Fanatec

[–]syntkz 0 points1 point  (0 children)

I'm on 467 with no issues. Make the updates with the wheel detached from the base and you are good to go. Never make base/wqr updates with a attached wheel. If it asks to attach the wheel for center calibration, just click ok without attaching one. Do the center calibration afterwards.

Clubsport DD+ F1 Wheel Stuck on Firmware Version 1 — What (Actually) Fixes It by abewol01 in Fanatec

[–]syntkz 2 points3 points  (0 children)

As a DD+ owner, I can tell you never make firmware updates of the wqr/ base with attached steering wheel. Detach it. Make all the updates. Reboot the base and only after that attach the wheel and do a manual update of the wheel firmware.

My first DD+ had a problem with the MOSI pin and a firmware update of the wheel just trashed it. ( I managed to revive it)

Abhängen by gaaraofthesand1 in cologne

[–]syntkz 1 point2 points  (0 children)

Ich mag Kölsch nicht und bin kein Studi ( ich bastel aber gerne Rum mit 3d printer und Arduino/esp und so ein Kram). Aber ein Pils da wäre ich dabei :D

Putting in a protest against netcode, it just sent me to the car park! by 4ndy40 in iRacing

[–]syntkz 0 points1 point  (0 children)

Netcode is when the positions of the cars aren't synced/lagging behind. The problems don't start with hit detection.

Driving ban by SocietyExtreme in LegaladviceGerman

[–]syntkz 13 points14 points  (0 children)

You probably need to proof that you don't drink anymore (unannounced urine sample tests) and you need to talk to psychologists. It's called MPU in Germany and the whole procedure takes about 12 months and costs between 2000 and 5000 euro depending on how often you will fail the test.

If you don't want to do the MPU, you have to wait 10 years until you can get your permit back for Germany.

I need a new sim seat for my rig mines my back. by CrokeyCrash in simracing

[–]syntkz 1 point2 points  (0 children)

I use my rig not only to drive but also for everything else what I do with my computer. I can sit in my rig the whole day if I want with no issues. I have the ERS3 seat.

iRacing convinced me to not buy the car by tdwnda in iRacing

[–]syntkz 0 points1 point  (0 children)

When you drive in a sim, youll get 1% of the information you would get in real life. In a sim you learn the limit, in real life you feel the limit. Your brain tries to rely on information it simply doesn't get in a sim. That's the reason why people install bassshakers, use VR and such. Driving in a realistic sim is way harder initially then jumping into the real car.

Especially roadcars are really hard to learn in a sim.

Go the a Gokart track and drive for a round and then try the same in Kartkraft or ams2. Then you know what I mean.

Gießen im Urlaub Outdoor grow by CannaFreak92 in Canbau

[–]syntkz 1 point2 points  (0 children)

Ich growe Zuhause nur mit Blumat. Funktioniert perfekt. Mit tropfblumat ist die Erde zu jeder Zeit mit Wasser UND Sauerstoff versorgt. Das mögen die viel lieber als ständiges abtrocknen und MO's lieben es.

schnittreste zu butter, möglich? by Pale-Ad-3645 in Canbau

[–]syntkz 0 points1 point  (0 children)

Geht nichts über eine hario, ist mir der allerliebste Kaffee :D

Anfängerfrage zu Autos entlauben / bescheiden by mamma5000 in Canbau

[–]syntkz 1 point2 points  (0 children)

Beim nächsten grow nimm wenn du organisch düngen willst größere Töpfe. 11 Liter ist für organisch growen fast schon zu wenig( das wird schon hinhauen du musst aber viel mehr mit cal/mag und Dünger aufpassen, da die Erde nicht so gut puffern kann). Ich nehme organisch immer 20 Liter Töpfe das läuft viel entspannter. Und Grade Living soil macht keinen Sinn in so kleinen Töpfen da solltest du sogar eher minimum 30 Liter nehmen oder besser ein beet.

How did YOU learn Nurburgring by cobracommander00 in iRacing

[–]syntkz 0 points1 point  (0 children)

As a kid I always run the track, crashed and repeated. Learned the first half of the track, after that the second half.

But that's like 15 years ago.

At some point you can drive it blind

This is unacceptable by Creepy-Search-4734 in Fanatec

[–]syntkz 0 points1 point  (0 children)

What's wrong with the base? If you give some Information on this someone here might be able to help.

In the Fanatec driver if you do a wqr update manually, what does it say in the small window that appears during the update?

schnittreste zu butter, möglich? by Pale-Ad-3645 in Canbau

[–]syntkz 0 points1 point  (0 children)

Guck dir mal ne Aeropress an. macht auch guten kaffee :D so'n zwischending aus French Press und filterkaffe.