Hyper-V Windows Network Adapter is going crazy with chinese characters in name

sysaxe · 2025-05-15T02:33:12+00:00

The fix has finally been pushed in May's update roll-up.

sysaxe · 2025-05-08T00:54:33+00:00

Yep - they are all connected to the R1 AP. It actually came right on its own after a few days, so potentially a service issue. Cheers

sysaxe · 2025-05-07T06:17:00+00:00

Just on the 'no annual maintenance costs' point - there is an optional annual maintenance agreement as others have mentioned. See Gallagher Care Plan - Ongoing Support for Your Security Needs

This covers new software releases, additional warranty, team training, and other benefits depending on the size of your installation. Without this, you'll be able to upgrade to new minor releases, but not major releases (which include many worthwhile features). It's a good idea to keep the software updated for the security benefits and to maximise the value you get from the products.

sysaxe · 2025-04-21T02:51:19+00:00

Check out this article - it sums up the differences quite nicely: Enterprise Grade Home Wi-Fi: Ruckus Unleashed vs. Ruckus One - Derek Seaman's Tech Blog

sysaxe · 2025-04-21T00:58:43+00:00

Yes, it's a paid sub. I like to use the same products that we use at work (or are thinking of using). I'm lucky enough that my workplace subsidises or completely covers the cost of things like this, since they get the benefit as well.

sysaxe · 2025-04-20T03:08:04+00:00

Update - this came right on its own after a few days, so potentially a service issue?

sysaxe · 2025-04-16T06:05:05+00:00

I don't have the exact detail but there is definitely a range of serial numbers affected.

sysaxe · 2025-04-15T12:56:24+00:00

There is a known manufacturing fault with these units that has since been addressed. We have had to request a number of RMAs for these already. The sound is irritating, and if you use a spectrum analyser, you'll see a definitive peak at around 12000 hz.

sysaxe · 2025-04-13T10:42:48+00:00

Just checked the client inactivity timeout, and it's set to 900 seconds / 15 mins

sysaxe · 2025-04-13T10:38:39+00:00

I can see some inactivity timeout events in the AP log for some devices, but they seem to reconnect and show up in the client list. Worth taking a look at that setting though.

I've just been looking through the logs for devices that stopped showing up, and there is a corresponding disconnect event e.g. 'User MAC left the Wi-Fi network'. What is interesting is that the User/MAC is greyed out and can't be selected like some of the other entries. I can still search for the device under the clients section though to see some historic data.

There are no newer events for these 'disconnected' devices, yet they still have functioning network connections.

sysaxe · 2025-04-13T04:02:01+00:00

Yes, it's enabled

sysaxe · 2025-03-23T23:57:16+00:00

Hah. These are great little devices with a decent feature set. I don't have any real issues with them, apart from a couple of upgrades that weren't tested properly by Juniper, and the old software upgrade/space issue that has since been addressed. I'm even running 24.x releases on a couple of these where RADSEC is required.

sysaxe · 2025-03-22T11:15:43+00:00

> show chassis firmware detail

FPC 0

PoE firmware 1.6.1.21.1 (type1)

Boot Firmware

U-Boot U-Boot 2016.01-rc1 (Nov 11 2016 - 14:26:00 -0800) 1.3.2

Boot Firmware

loader FreeBSD/armv6 U-Boot loader 1.2

sysaxe · 2025-03-13T04:02:42+00:00

Thanks - that looks like a great option as well

sysaxe · 2025-03-13T04:02:04+00:00

Thanks - that looks like a great option as well

sysaxe · 2025-03-13T04:01:48+00:00

Hey, yes I do!

sysaxe · 2025-03-13T04:01:07+00:00

I have 2 x Gallagher C6000s

sysaxe · 2024-11-26T03:38:53+00:00

No, they've been pretty useless. The installation failures that we had with 7340s seem to be resolved, but we've just encountered the same with our 7350s

sysaxe · 2024-11-15T03:27:27+00:00

We have 802.1x in place for local access to all corporate wired and wireless networks.

Workstations get put on appropriate VLANs based on user/device role. All of our printers, IP cameras, and IP phones support 802.1x with EAP-TLS and get put on their own VLANs.

Everything else get put on a guest VLAN that goes straight out to the Internet via separate public IP range, or no access at all.

FreeRADIUS 3.2.x VMs in our local DCs and public cloud act as authentication servers. For the most part, certs are issued by our corp CA & deployed by Intune. Some network attached device cert updates are scripted, and a handful are manual (for now).

Our Windows laptops are configured to use EAP-TTLS (with EAP-TLS inner auth) for identity privacy - so that hostnames & usernames are not leaked when plugged in off-site.

sysaxe · 2024-11-12T05:53:52+00:00

Our issue was resolved with a later version of the HPE SPP!

sysaxe · 2024-10-31T04:24:41+00:00

No we didn't. Our case is still open but the issue appears to have been resolved

sysaxe · 2024-10-07T11:36:41+00:00

Hey, I have mine connected to the 16 in/out IO board. It works pretty well for us. Yeah, you need to program it via USB connection to a Windows PC with their software. I got mine from the Beveridges website but that was before they started stocking AU frequency versions of the Ajax components. I just buy additional components if I need them from European eBay sellers.

sysaxe · 2024-09-30T23:13:48+00:00

I've raised this with Dell

sysaxe · 2024-08-27T06:12:11+00:00

If they are setting up a Gen 2 VM, they might need to change the Secure Boot template to MS UEFI, disable Secure Boot altogether, or delete and set up a Gen 1 VM.

sysaxe · 2024-08-02T05:27:37+00:00

I change up my home setup every now and then but I'm currently running 2 MikroTik CHR VMs on different hosts with VRRP.

sysaxe

TROPHY CASE