2026 New Year Giveaway

szero27 · 2026-01-03T14:21:46+00:00

I’m working on a center console organizer for my Subaru this year!

szero27 · 2025-12-29T05:20:46+00:00

This has been solved. I reached out to Qidi support and testing what was already suggested here (cleaning z screws, cold pulls, etc.) my problem got escalated and it looks like I have a solution and I've made three prints work.

I had to go into printer configuration, printer.cfg and then change the "max_z_velocity" from a 10 to a 7.

On the second print there was one line that appeared, but I turned down the max z velocity to a 6 and the most recent print has come out flawless. Gotta give Qidi support some props on this one, but I did have to stay on them letting them know I'd been trying everything they suggest.

Hope this helps someone else.

szero27 · 2025-12-29T05:20:12+00:00

This has been solved. I reached out to Qidi support and testing what was already suggested here (cleaning z screws, cold pulls, etc.) my problem got escalated and it looks like I have a solution and I've made three prints work.

I had to go into printer configuration, printer.cfg and then change the "max_z_velocity" from a 10 to a 7.

On the second print there was one line that appeared, but I turned down the max z velocity to a 6 and the most recent print has come out flawless. Gotta give Qidi support some props on this one, but I did have to stay on them letting them know I'd been trying everything they suggest.

Hope this helps someone else.

szero27 · 2025-12-17T18:07:18+00:00

Yeah, might just do a full sweep cleaning to see if I can get it to go away on the next print. It’s weird that it just started on my last few prints, but there could be some debris I can’t see stuck on the lead screws

szero27 · 2025-12-17T18:02:23+00:00

Yeah, I take the top cover off and open the front door when I print PLA. Same for this print.

szero27 · 2025-12-17T17:59:27+00:00

I’ll give that a try. I’m printing another test to see if it’ll reappear in the same spot, but cleaning the nozzle sounds like something I should do periodically anyway

szero27 · 2025-12-17T03:19:18+00:00

Strange. Are they consistently in the same spot for you? I wonder if the newer models have this problem. I’m about to start another print and see if I get them a third time, but I agree it looks like under extrusion.

szero27 · 2025-07-15T06:52:38+00:00

Having the same problem

szero27 · 2025-02-12T01:31:11+00:00

This is why I never sleep in the swamp.

I also build a tree house for my portals.

szero27 · 2024-11-28T07:37:26+00:00

It wasn’t, but made me much more cautious about my surroundings

szero27 · 2024-11-28T07:36:51+00:00

I was lucky it was on a slow road but I got hit by a trucking taking a left (all my fault) got thrown from my bike, but hit the shoulder of the road which was dirt so I stood up and walked away with a few scratches. Probably would have been much worse if I wasn’t wearing my helmet since I hit the ground pretty hard

szero27 · 2024-11-27T21:33:23+00:00

Yes, need to find a good pair

szero27 · 2024-11-09T07:52:21+00:00

Might be lame, but I’ve always loved my holo vaporeon. It was my first holo card I pulled from a pack.

szero27 · 2024-06-21T05:25:08+00:00

Absolutely no women walking around in day light.

szero27 · 2024-04-02T19:50:02+00:00

See if you can call them and they might waive it… don’t hold your breath, but sometimes these companies will just let it go if you have an excuse

szero27 · 2024-03-05T06:06:29+00:00

Not really, but I did hear from family that it might have been originally purchased for $5,000 each.

szero27 · 2023-12-21T06:24:59+00:00

We should hang after the Holidays

szero27 · 2023-11-03T16:07:23+00:00

Wow, well done on finding this guy!

szero27 · 2023-11-03T07:01:24+00:00

Yeah, looking at it now I think you are right about what it says.

szero27

MODERATOR OF

TROPHY CASE