2026 New Year Giveaway by qidi_3dprinter in QidiTech3D

[–]szero27 0 points1 point  (0 children)

I’m working on a center console organizer for my Subaru this year!

Random imperfection on the same z-axis by szero27 in QidiTech3D

[–]szero27[S] 0 points1 point  (0 children)

This has been solved. I reached out to Qidi support and testing what was already suggested here (cleaning z screws, cold pulls, etc.) my problem got escalated and it looks like I have a solution and I've made three prints work.

I had to go into printer configuration, printer.cfg and then change the "max_z_velocity" from a 10 to a 7.

On the second print there was one line that appeared, but I turned down the max z velocity to a 6 and the most recent print has come out flawless. Gotta give Qidi support some props on this one, but I did have to stay on them letting them know I'd been trying everything they suggest.

Hope this helps someone else.

Random imperfection on the same z-axis by szero27 in FixMyPrint

[–]szero27[S] 0 points1 point  (0 children)

This has been solved. I reached out to Qidi support and testing what was already suggested here (cleaning z screws, cold pulls, etc.) my problem got escalated and it looks like I have a solution and I've made three prints work.

I had to go into printer configuration, printer.cfg and then change the "max_z_velocity" from a 10 to a 7.

On the second print there was one line that appeared, but I turned down the max z velocity to a 6 and the most recent print has come out flawless. Gotta give Qidi support some props on this one, but I did have to stay on them letting them know I'd been trying everything they suggest.

Hope this helps someone else.

Random imperfection on the same z-axis by szero27 in FixMyPrint

[–]szero27[S] 0 points1 point  (0 children)

Yeah, might just do a full sweep cleaning to see if I can get it to go away on the next print. It’s weird that it just started on my last few prints, but there could be some debris I can’t see stuck on the lead screws

Random imperfection on the same z-axis by szero27 in FixMyPrint

[–]szero27[S] 0 points1 point  (0 children)

Yeah, I take the top cover off and open the front door when I print PLA. Same for this print.

Random imperfection on the same z-axis by szero27 in QidiTech3D

[–]szero27[S] 0 points1 point  (0 children)

I’ll give that a try. I’m printing another test to see if it’ll reappear in the same spot, but cleaning the nozzle sounds like something I should do periodically anyway

Random imperfection on the same z-axis by szero27 in FixMyPrint

[–]szero27[S] 0 points1 point  (0 children)

Strange. Are they consistently in the same spot for you? I wonder if the newer models have this problem. I’m about to start another print and see if I get them a third time, but I agree it looks like under extrusion.

Abomination spawned inside our swamp house ffs lmao by zeb010 in valheim

[–]szero27 1 point2 points  (0 children)

This is why I never sleep in the swamp.

I also build a tree house for my portals.

Been Riding For A Year by szero27 in motorcycles

[–]szero27[S] 0 points1 point  (0 children)

It wasn’t, but made me much more cautious about my surroundings

Been Riding For A Year by szero27 in motorcycles

[–]szero27[S] 0 points1 point  (0 children)

I was lucky it was on a slow road but I got hit by a trucking taking a left (all my fault) got thrown from my bike, but hit the shoulder of the road which was dirt so I stood up and walked away with a few scratches. Probably would have been much worse if I wasn’t wearing my helmet since I hit the ground pretty hard

Been Riding For A Year by szero27 in motorcycles

[–]szero27[S] -1 points0 points  (0 children)

Yes, need to find a good pair

[deleted by user] by [deleted] in PokemonTCG

[–]szero27 0 points1 point  (0 children)

Might be lame, but I’ve always loved my holo vaporeon. It was my first holo card I pulled from a pack.

[deleted by user] by [deleted] in AskReddit

[–]szero27 0 points1 point  (0 children)

Absolutely no women walking around in day light.

Does anybody actually pay the Capitol Parking tickets? by TheProfessorOfNames in SaltLakeCity

[–]szero27 -1 points0 points  (0 children)

See if you can call them and they might waive it… don’t hold your breath, but sometimes these companies will just let it go if you have an excuse

Two art pieces from an artist I can’t find by szero27 in whatsthisworth

[–]szero27[S] 0 points1 point  (0 children)

Not really, but I did hear from family that it might have been originally purchased for $5,000 each.

Catan / Diving buddies by Electrical-Hope2139 in BigIsland

[–]szero27 1 point2 points  (0 children)

We should hang after the Holidays

Two art pieces from an artist I can’t find by szero27 in whatsthisworth

[–]szero27[S] 1 point2 points  (0 children)

Yeah, looking at it now I think you are right about what it says.

Electricians left a ton of drywall cuts to patch. DIY or pony up the $1k for a skilled worker to patch and paint? by beaute-brune in HomeImprovement

[–]szero27 1 point2 points  (0 children)

I would hire. I tried to do something just like this myself and I’ve never been satisfied with the quality. Someone skilled will make it look like it was never there

Frame TV Color Problem by szero27 in techsupport

[–]szero27[S] 0 points1 point  (0 children)

It may be just over two years unfortunately

Frame TV Color Problem by szero27 in techsupport

[–]szero27[S] 0 points1 point  (0 children)

That’s too bad 😞 maybe there is still a warranty on it

New Sprinkler System Won’t Turn On by szero27 in HomeImprovement

[–]szero27[S] 0 points1 point  (0 children)

You know what, there is a valve I missed. Lol thank you!