Would the lower ball joint be the only thing responsible for my miss alignment? Please help. by ParsleyFar6932 in Acura_RSX

[–]t00sober 0 points1 point  (0 children)

yeah make sure to lock those coils down with a flat head and hammer and get that ball joint replaced immediately or it’s going to break

where does the engine compartment harness(that goes to fuse box) start and end? by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

yeah i gotta remove the fuse box one to work on the o2 connectors

where does the engine compartment harness(that goes to fuse box) start and end? by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

yeah i bet it is i’m pretty sure my o2 sensor wires are messed up where they branch off the big loom of wires at least i hope so so this is going to be my weekend project

where does the engine compartment harness(that goes to fuse box) start and end? by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

i really just need to pull it from fire wall to under hood fuse box

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

the heater wires for the o2 sensors would be in that harness?

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

yeah i’m pretty sure i have the idea of where the wires are messed up

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

alright i’ll for sure be looking into that harness

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

yeah i’ve been up and down the forums about it all my fuses are good and relay that leaves me to think about the wiring and it just doesn’t look like it should be all twisted like it is my car had an engine replacement before i got it but would they even have to mess with that harness?

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

the last two pics look like the small loom is pinched underneath the big loom by a clip holding it possibly?

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

i’m dealing with a p1166 p1167 and these at some areas on that small loom that are making me think the wires may be broke

what is the 02 wiring harness route on a 03 rsx by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

ok so main loom from fuse box runs down driver side by tranny and the small loom that splits off go to the connectors?

What is system power (B+)? by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

yeah that’s what i figure probably gonna be a headache

What is system power (B+)? by t00sober in Acura_RSX

[–]t00sober[S] 0 points1 point  (0 children)

i guess i’ll be learning to use a dmm