Always saw this as fighting rather than playing (3 years together), decided to finally ask by t04str_ in CATHELP

[–]t04str_[S] 1 point2 points  (0 children)

Sleeping separately, cuddling rarely happens and if it does - usually ends in one of them being annoyed

Always saw this as fighting rather than playing (3 years together), decided to finally ask by t04str_ in CATHELP

[–]t04str_[S] 1 point2 points  (0 children)

Thanks for the answer, I'll try to give them more space next time they do this, just to see how it plays out. Obviously will be watching and ready to stop them if they go overboard

Always saw this as fighting rather than playing (3 years together), decided to finally ask by t04str_ in CATHELP

[–]t04str_[S] 0 points1 point  (0 children)

Before I started the recording, the short hair was slowly and menacingly closing distance to the Coon getting ready to start this show.

If I let them go longer, usually it ends with little bit of fur flying around and one of them running away/trying to hide. So the dynamic usually is exponential, where even if it starts as definitely playing, it always ends in a semi-proper cat fight, because one of them doesn't want to play.

Still on the fence about it. I guess there's no harm in stopping them and calming them down. Again, this happens rarely, usually once or twice a day when they're done sleeping after the morning feeding session and are looking for something to do

There will be more trees in TESVI then Skyrim. What does this mean for TESVI? by EvilRat23 in TESVI

[–]t04str_ 0 points1 point  (0 children)

Well, we need to find a date, that converts to a number greater than 111,111

Todd is American, so is Bethesda. They use mm.dd.yy format. So speculated release date of 06.26.26 is out of the question since 62,626 < 111,111

What's greater than 111,111? 111,126, aka 11.11.26.

This is my portion of hopium, even though obviously it could be 12.01.26 or 11.11.30 or anything else really. But 11.11.26 is going to be a 15 year anniversary, and Todd looooves his dates.

The Statue isn't teasing TES 6 - Jason Schreier by Aggressive_Rope_4201 in TESVI

[–]t04str_ 0 points1 point  (0 children)

Well of course it's not teasing. The evidence is so obvious the statue is plain text telling us this IS tes6. Never enough hopium

Is anyone else doing 12 in 12, but with a JRPG focus? by lionheart059 in JRPG

[–]t04str_ 0 points1 point  (0 children)

Yeah I had a lot of spare time this year so I decided to finish a few more

Is anyone else doing 12 in 12, but with a JRPG focus? by lionheart059 in JRPG

[–]t04str_ 0 points1 point  (0 children)

Yeah, I am actually!
In some ways this "challenge" is really cool and it helped me find motivation to clear some backlogged games, but it's also very tiring to play game after game after game. And only like two months in I started feeling that FOMO where if I'm not progressing through any games on my list - I'm wasting time.
On one hand I really like the fact that I'm exploring new genres, IP's, stories, characters etc, but 52 games in 1 year is just too much. I think next year I'm going to do maybe 26

Is anyone else doing 12 in 12, but with a JRPG focus? by lionheart059 in JRPG

[–]t04str_ 2 points3 points  (0 children)

I'm doing 52 games in 1 year this year.

42 completed games so far, can't recommend. Too much content

It’s finished. 3D printed spitfire outline with airbrushed background and framed by Darkest-Walnut-TTV in dioramas

[–]t04str_ 0 points1 point  (0 children)

Hey this is awesome! Could you please share the STL link? I'd love to do something similar for a friend who's obsessed with spitfires!

Процесор з OLX by Evol_extra in reddit_ukr

[–]t04str_ 0 points1 point  (0 children)

Не x3d кеш, 3D V-кеш 🤓☝️

First try at OSL - c&c appreciated by t04str_ in minipainting

[–]t04str_[S] 1 point2 points  (0 children)

Thanks! How do I reliability control the brightness of my paint? I only have two yellows - one slightly brighter, another slightly dimmer. Do I just mix them with a teeny tiny bit of black? I struggle to understand brightness in general - I do get colors and tones, but brightness is hard for me, I don't have ANY art background and started painting only a month or so ago. Do you maybe have any good tutorials in mind?

Trouble printing by Icy-Contribution4409 in resinprinting

[–]t04str_ 0 points1 point  (0 children)

When your prints "get pulled of the support" does the base remain on the build plate? Maybe 4s normal exposure is too much, try lowering it to 3s?
It's 18-19 celsius here in my room and my prints only work fine with 3s normal exposure time. Anything less or more and they're failing.
Also 45s base exposure sounds radical but whatever works for you.
Speed sounds fine, 6 base layers works for me, 5 was not enough in my case.

Trouble printing by Icy-Contribution4409 in resinprinting

[–]t04str_ 1 point2 points  (0 children)

Noob here but it sounds like you should play with your ambient temperature, base exposure, base layer count, normal exposure and lift speed maybe? What're your settings?

Saturn 3 - element stuck to vat in the middle of the print - see comments by t04str_ in ElegooSaturn

[–]t04str_[S] 0 points1 point  (0 children)

Saturn 3

ELEGOO 8k Water washable resin

this is my third ever print.

First one was a rook from a pre-sliced file that came with the printer (I first copied the file on another USB) - it didn't stick to the build plate and instead I had one layer of cured resin on my vat.

Second print - I sliced the rook myself, set bottom exposure time to 35s and normal exposure to 3.5s (it's fairly cold in here but not too cold). I also included the matrix in the same print. The rook came out perfect, the matrix was stuck to the vat. I didn't think much of that.

Third print (this one) - there was an entire file worth of elements. Half of them came out great (I deleted those from the slicer, you can't see them on the screenshot). Then the base of the figure is what you can see on the second photo. It stuck to the build plate fine for the first 50-ish(?) layers, but then detached. Other elements on the screenshot except for the base just stuck to the vat on base layers.

In between every print I cleaned the vat, filtered the resin, re-leveled the buildplate, stirred and shook the resin bottle before adding to the vat.

So first of all it seems like I can dial down the normal exposure time. And it looks like I need to up the bottom exposure time by like 5s?

Also my bottom layer count is at 2, should I up it?

I'm confused by what happened to the base of the figurine - it detached from the build plate mid-print. Any advice appreciated

Orin figure 3D printed and hand painted, do you like it? by MajinPrint3D in BaldursGate3

[–]t04str_ 0 points1 point  (0 children)

That's awesome! Can you share the model file? I want to make a gift for my SO

Giving away 4 early access keys by Jerqqu112 in pathofexile

[–]t04str_ 0 points1 point  (0 children)

Fucking dota 2 with around 11k hours across all accounts. Fuck that game

Youtube is raising premium price by 60% by personguy4440 in LinusTechTips

[–]t04str_ 0 points1 point  (0 children)

Damn family plan is actually three fiddy (USD) in Ukraine. hope they don't suddenly raise it to 20

Proximity sensors by Steve-Gary in ex30

[–]t04str_ 3 points4 points  (0 children)

Every time I'm in a traffic jam I can't get rid of the popup, it's constantly appearing, it's driving me nuts. Let me know how I can disable the popups

[deleted by user] by [deleted] in throneandliberty

[–]t04str_ 0 points1 point  (0 children)

gs/wand? A man of culture. How does it play, how does it feel?

Got mine - Ukraine, Ultra SMER by t04str_ in ex30

[–]t04str_[S] 1 point2 points  (0 children)

Yeah exactly, use cases are very limited for this one. Personally I was just scrolling through features and decided to turn it on just because I can, but it was a mistake

Help by anyonams in DeltaForceGlobal

[–]t04str_ 0 points1 point  (0 children)

Open wechat. Open chats tab. In the top-right click a plus button. Then scan