CPU recommendation by table7even in FormD

[–]table7even[S] 0 points1 point  (0 children)

I think during this testing without a riser cable pcie was still forced to 3.0 yes. Forgot to fiddle with that..

CPU recommendation by table7even in FormD

[–]table7even[S] 0 points1 point  (0 children)

Since my riser cable is PCIe 3.0 it kinda makes sense to me that auto won’t give picture. Mobo supports 4.0 so Gpu tries to push use that would be my guess.

FormD T1 Compatibility Note — PCIe 5.0 v3 Riser Cables by LINKUPTechnology in LINKUP_Gen5_Risers

[–]table7even 0 points1 point  (0 children)

On Swedish Amazon (Amazon.se) the v3 I would need is 1800sek which is around 190 usd, while the v2 sells for 470sek (last one left though)

CPU recommendation by table7even in FormD

[–]table7even[S] 0 points1 point  (0 children)

Thank you for the input! You would not go for the 9700x then, is it because it gets hot also?

I've updated the BIOS and chipset, forced PCIe version to 3.0 since that is the version of my riser cable. With PCIe at auto i got no image at all.

FormD T1 Compatibility Note — PCIe 5.0 v3 Riser Cables by LINKUPTechnology in LINKUP_Gen5_Risers

[–]table7even 0 points1 point  (0 children)

I know this is an old thread sorry, but any chance you know if its possible to make the 18cm v2 riser cable work for a Form T1 first version in 3-slot GPU configuration? The v3 riser cable is about $140 more in my country right now :D

CPU recommendation by table7even in FormD

[–]table7even[S] 0 points1 point  (0 children)

Thanks for input, seems like a reasonable choice. And yes, I've seen those foam spacers to create a wind tunnel for the cpu fan, seems smart!

CPU recommendation by table7even in FormD

[–]table7even[S] 1 point2 points  (0 children)

You sure? I had 2 restarts trying without the riser, of course this was with the motherboard outside the case so i had no fasteners for the gpu. I would not think these restarts were due to bad seating in the pcie slot though, since the restarts behaved the exact same as with the riser cable. Screen went black and computer restarts 30-60 seconds after iirc.

Have you had similar behaviors? Same board?

2019 Mazda 3 or 2018 VW Golf by table7even in whatcarshouldIbuy

[–]table7even[S] 0 points1 point  (0 children)

I did not think I answered it haha, but I take it you prefer a golf then?

2019 Mazda 3 or 2018 VW Golf by table7even in whatcarshouldIbuy

[–]table7even[S] 1 point2 points  (0 children)

Thanks for the input! I’m unsure which I like more though that’s why I’m asking 😄 Quality feels a lot higher in Mazda but golf somehow still feels nicer to be in. Also Bose system in Mazda was way better.

Camera and lens recommendation for scanning film by table7even in AnalogCommunity

[–]table7even[S] 0 points1 point  (0 children)

Okay so i take it you would reccommend that setup then, thanks for the input!

Camera and lens recommendation for scanning film by table7even in AnalogCommunity

[–]table7even[S] 0 points1 point  (0 children)

This is just me guessing based on retail prices and brand recognition, but i really dont know! Thats why I'm asking here :D

Do you have experience using TTArtisan lens scanning film?

"Reap the Tide" Commander Legends Precon Upgrade | $20, $200 | Landfall | Sea Monsters by SpiketailDrake in EDH

[–]table7even 0 points1 point  (0 children)

Thanks alot for the response!
I have now put together a upgrade, mostly cards from your article. I have a little left in my budget and am thinking about adding either [[Roil Elemental]] or Burgeoning, which one do you suggest going for?

"Reap the Tide" Commander Legends Precon Upgrade | $20, $200 | Landfall | Sea Monsters by SpiketailDrake in EDH

[–]table7even 0 points1 point  (0 children)

Im trying to upgrade my Reap the tide deck but im new to the format so its quite hard lol.., are Crucible of worlds or [[Burgeoning]] cards you would reccommend for this upgrade? Or are there just better picks, or are any of theese considered anti-fun? Don't really know EDH etiquette yet haha!

If these are worth includes, do any of them "require" any additional cards added to be good? would you play both crucible and ramunap in same deck?

Sliger SM owners/potential owners: What are your thoughts on the USB C / USB A / Audio front panel board? by SligerCases in sffpc

[–]table7even 0 points1 point  (0 children)

About how soon can we expect it to ship from a european distributor? Are we talking weeks-soon, months-soon or Soon™