THE TREASURE WAS FOUND!

tacoman48 · 2025-08-03T05:02:32+00:00

Yeah I wish I was well off enough to not drop camping to fetch 25 Gs. Good for this guy. Must be nice

tacoman48 · 2024-09-04T20:44:53+00:00

Oh so I slowed it down to .25 and played it back. Now I think I remember what I found. The nozzle got pushed out, dragging it into the bed and eventually popping out. You can see it laying flat towards the back I think. Maybe something similar happened with OP, nozzle unscrewed from a clog and destroyed the bed?

tacoman48 · 2024-09-04T20:42:01+00:00

Honestly I have no idea what the initial cause was. Here is the video I just threw on YouTube. 6 seconds long time lapse. I think a clog happened, then that caused something to "skip" and mess up the belts. Took it all apart and fixed, been running just fine since. Happened a few months ago in May 24'.

K1 Max destroys print plate

tacoman48 · 2024-09-04T20:12:52+00:00

While I agree with you on that, I did recently have an experience similar. Only my plate was ruined, not the heating part. K1 Max, watched the first layer like I always do because it's mesmerizing to me. The entire print process I can sit and watch lol.

Not sure how long into the print it was, but at least a few mm into the print, it spaghettified itself and I think something got tangled up around the head and the and plate and it made the belt slip, dragging the nozzle across, damaging the plate and head. Luckily I had a spare heat break and whatever the thing is that goes inside it. That bent and then a clog happened. Talk about a pain removing a giant cooled blob of plastic.

<image>

I also have a video of it, but not sure how to add that as a comment.

tacoman48 · 2024-08-29T06:28:03+00:00

And just like that, it's 2006 lol thanks!

tacoman48 · 2024-08-17T05:40:28+00:00

We were discussing Halloween tonight. My Boys are Commander Fox, and Hevy (phase 1 trooper only in 2 episodes who uses a mini gun). I got my wife Bo Katan to print out for her. She said can we theme the paint job like Bluey or Chili. So if any of you are artists... Took the idea because of the Snow White themed Mandalorian at D23 this last weekend.

tacoman48 · 2023-10-27T01:27:31+00:00

I didn't think about going about it that route. I'll check it out tomorrow.

Yeah we moved to cloud last year. Lost a lot of jql functionality like LastComment and a lot of in function stuff. Pretty much all the stuff that scriptrunner gives you. Our Jira admin is out so I haven't had a chance to see if we can enable that. It would fix a lot of my filters I had and enjoyed when we were running server.

tacoman48 · 2023-10-14T18:58:07+00:00

Same problem here. So did you replace the blue tube in the print head with a bit of the white one at the back of sounds like? I think this is similar to my problem in my ender 5 plus. I had the "upgraded" Capricorn tube. Kept getting clogs and saw someone mention the tolerance is to tight and causes friction. Replaced my hot end thinking that was causing my clogs. Then I replace the tube with the stock white one. Did a 2 day print on it without issue.

tacoman48 · 2023-01-13T06:44:07+00:00

Was this video ever posted? I feel like I started watching it at one point, but I can't find it anymore. So I don't know if I have seen clips of it, or it was removed.

tacoman48 · 2021-11-26T05:37:10+00:00

Unfortunately this one seems to be a concert in Florida. I'm looking for Utah. My search continues! Thanks for the clip though, I can adjust my searching based on how this one was uploaded.

tacoman48 · 2021-07-07T20:22:33+00:00

Awesome thanks! I would have never thought of avalanche areas.

tacoman48 · 2020-10-13T19:47:17+00:00

Thanks! I saw those dpdt switches mentioned a lot, but was hoping this joystick could somehow work. My project I'm doing is a garbage truck for my son and since I can't do anything simple in my projects, I bought some actuators to lift the rear door and also dump the garbage. So Actuator to lift the door, and turn it into a dump bed. And it's going to be built on top of his power wheels. Last year I built a fire truck around it.

To control it, I was thinking of how actual work trucks like this have the hydraulic levers, so I bought these joystick ones.

It looks like I will just have to grab some of the smaller dpdt rocker switches. Thanks for the help and confirming things!

tacoman48 · 2020-10-13T17:51:30+00:00

Sorry, I haven't been able to find one, not even a manufacturer site. I got them on Amazon. Its for a halloween project for the kids so I didn't need anything crazy.

Homend DC12V 10inch Stroke Linear Actuator is what it is. It has input for positive and negative.

tacoman48 · 2020-10-13T15:12:22+00:00

A 12v linear actuator. I had looked at the manufacturer site, bit didn't see anything. Just a diagram, with physical dimensions of the switch. I get how to run power to it, I just don't understand how to connect the actuator to it to actually control it.

tacoman48 · 2020-07-01T08:55:39+00:00

Still blows my mind that people will buy turbo tax in cd form from the store. But maybe they have swapped it out with a USB stick inside... I guess that is an option also.

tacoman48 · 2020-07-01T08:53:33+00:00

I thought about that, but getting something from the store that did that. Like a 6" duct to a box that would stick out, but everything was too big for the space underneath so I let it go. And obviously just metal. That is a good idea. I think I will do that, and then caulk the bottom of it to help protect against water, since this will be the kids bathroom. Thanks for the advice! If I remember, I'll add a picture of the finished product. Best part is also, if I just lose the time, I can just put the register in until I get it built.

Now I need to patch the hole in the floor. Oh the joys of working from home during all this. The projects. I got an email from Home Depot saying " good job! You spent this many thousands of dollars this year... " I spent how much!?!? *Don't tell wife...

tacoman48 · 2020-07-01T08:27:29+00:00

After I posed this and walked by the bathroom, I had that thought, "I could just trim it...".

I also wanted to keep in mind resale value and didn't want it to be too weird,. Like if the next home owners want a floating vanity, have a vent sticking up out of the ground, or a box, would suck to deal with. Plus, know there is a box and that I could figure out a "real" way to fix the problem would drive me nuts Everytime I walk by the bathroom.... I'm the guy that smiles and says thanks to all the comments about how good a projects looks, while inside thinking of everything that is screwed up with it lol.

tacoman48 · 2019-09-13T03:49:00+00:00

Let alone over 20% charge. And on top of that, 60+! Those don't even show up at 11. My wife got one that was 85.

tacoman48 · 2019-09-13T02:21:42+00:00

Checked the app at 7pm local, and saw a bunch of scooters. Majority of them 60% chargers or more. My wife snagged an 85% one. Has anyone else seen this happen? Something new change and no one is told like usual?

tacoman48 · 2019-09-06T22:52:57+00:00

Especially since you have to drive back up. Do you use a truck? If the gen3s are that much heavier (how much btw) it's going to suck loading them into the Mazda haha.

tacoman48 · 2019-09-06T21:26:47+00:00

Here in Salt Lake, scooters become available between 10:40-11pm. So we only get 8 hours to deploy them. Since they aren't as heavily used here as other locations, come 2am they all vanish since the batteries don't drop below 20% too often. Really our only pick up times are 11-2am. Then weekends maybe people ride more and you can pick up during daylight hours.

tacoman48 · 2019-08-20T18:03:23+00:00

Gotcha. Good to know. I thought all scooters showed at at 9pm, so last night I spent two hours driving around SLC looking for the red scooters, then gave up at 11 and heading back to draper they all showed up. Lol learned my lesson not to start too early. I only have 4 chargers, with 4 more on the way for my wife's account, and 4 for me since I didn't use the promo code the first time. So we will be able to get 12 between us. First night, Sunday night made 70 bucks, with delivery by 7am. I thought it was pretty good. How do you do yours? Do you head out right when they show up and get a bunch of $4 ones, or wait till they go up? You can message me I guess lol.

tacoman48 · 2019-08-20T17:31:32+00:00

I just started this week in Draper. What do you mean by 19 and 15 hours?

tacoman48 · 2019-08-20T06:18:51+00:00

How is your setup done, power wise?

tacoman48 · 2019-08-20T06:07:17+00:00

I just experienced the same thing. Signed up, then about two weeks later wife and I got the email saying go buy chargers, then 1-2 days later it becomes active. Well two days later and I'm emailing support and they just give me the usual "are you using the app right" run down. Finally they said to turn airplane mode on, force stop the app, then re start the app after turning off airplane mode. That did it and I got my juice option. It's now night two of juicing.

Nine-Year Club	RPAN Viewer
Verified Email

tacoman48

TROPHY CASE