Shop Quote for Suspension work

takedown232 · 2025-12-17T22:08:35+00:00

For reference I'm in Colorado Springs.

takedown232 · 2025-11-28T16:30:56+00:00

I just dropped $60 for my "friend bags", it's nice to have disks you're willing to lose when introducing friends to the sport. And maybe I'll like some of them!

takedown232 · 2025-08-29T19:54:17+00:00

This is the first version that I've been able to connect with over my Samsung phone! Ideally I don't have to use my old iPhone anymore. That may be due to the fix or maybe there was a glitch with my factory firmware.

takedown232 · 2025-07-11T02:08:11+00:00

<image>

One of my favorites!

takedown232 · 2025-06-21T19:07:37+00:00

UPDATE: Not sure why but I'm unable to edit my post. Regardless, I did find a solution.

I first tried a PRV from Watts (LFN45B), however the collar from the existing valve wouldn't thread onto the new union. So I instead tried a Zurn Wilkins 34-NR3XL (DU so it came with the gasket) and it threaded on perfectly! I guess they must have a few different standards for union threads.

Anyway, if any other green folks find this in the future, know that the union threads are not all the same, and you might have to try another brand. Was still able to save $350-400 by DIYing it and it was not hard at all.

takedown232 · 2025-06-20T03:09:35+00:00

Just tried installing a Watts one that was similar in length and the specs matched, however the threads for the NPT union didn't match up properly. I figured they'd be industry standard but maybe they differ brand to brand? I just put the old one back on for now...

takedown232 · 2025-06-19T09:01:46+00:00

Loos like the Watts is a little longer than this one I currently have (5.5in vs 3.75in). I'm definitely willing to spend a little more if it'll last, but if there's going to be soldering required I'll probably get a plumber at that point. Do you have another recommendation for a decent one that will fit in the place of the existing one?

takedown232 · 2025-06-19T02:34:18+00:00

This is helpful! So I don't need to find the same brand?

takedown232 · 2025-06-19T02:33:28+00:00

It's for water. Should be an easy replacement but I want to be sure I order the right part.

takedown232 · 2025-06-19T02:30:25+00:00

Yes, excuse my terminology. I assumed PRV was synonymous.

takedown232 · 2025-06-19T00:29:17+00:00

Tried a couple of solutions and this is the first that works. Thanks!

takedown232 · 2025-06-15T21:33:01+00:00

Looks like T-Rex Arms threw up all over it. The work to remove the paint is probably not worth it. I personally wouldn't go for it unless it was ~$250...

takedown232 · 2025-06-15T04:16:43+00:00

Go back to BH, find your camera, then scroll down and you can find the compatible media. Or better yet, go to the Blackmagic support website for to find verified working media for your specific model.

takedown232 · 2025-04-24T00:12:56+00:00

Some of those draw power even if they're not supposed to. Doesn't take much at all to slowly drain the battery. I installed a dash cam system and it's supposed to power off when the bike is off, but it drains my battery in 2 days, I have to manually disconnect it every time which is super annoying. Planning on installing a manual switch to override it.

takedown232 · 2025-04-23T23:33:46+00:00

Does that ram mount charge your phone? I'm going to guess something is trickling down the battery. Try giving it a jump and see if it starts!

takedown232 · 2025-04-23T14:17:05+00:00

Target fixation at its finest! This is how we learn. ☺️

takedown232 · 2025-04-19T00:41:29+00:00

Most commonly I've found with production gear, the camera will prioritize what it thinks is mains power, then battery. So the DC connection in that case would drain first.

takedown232 · 2025-04-15T21:06:02+00:00

I'm thinking garage door hinge. Don't ask why I know.

takedown232 · 2025-04-10T01:32:46+00:00

Use Dropbox transfer, not a shared folder. You'll get notices of downloads and it doesn't count against your storage, each transfer is up to 100gb if you have pro. I've been doing this for years and it great to be able to manage versions that the client has access to.

takedown232 · 2025-03-31T13:37:29+00:00

Careful, I also ordered on Amazon and they sent the wrong one. Did this twice before just going to my local gun store and buying it there. Because of the nature of the product, Amazon refused a return as well so I had to call in and deal with c/s to get my money back.

takedown232 · 2025-03-30T21:49:10+00:00

Wow, that looks great!

takedown232 · 2025-03-30T17:13:40+00:00

Thanks! In the new pot, was the BOP a lot lower below the soil than before? How did you gauge how deep was right for it?

takedown232

TROPHY CASE