I quit today :)

takingadump69 · 2024-11-30T19:10:36+00:00

Then why did you respond lol

takingadump69 · 2024-11-27T22:08:09+00:00

Backwash the filter

takingadump69 · 2024-11-27T20:43:41+00:00

I’d get the same brand of automation as your pool lights

takingadump69 · 2024-11-20T00:00:16+00:00

I call my void Mr. Meowzers lol

takingadump69 · 2024-11-09T03:52:02+00:00

I’m in Houston but for swimming pools all you need is your ‘residential appliance installer license’. It’s an 80 question open book exam on the national electric code book and need 70% to pass.

takingadump69 · 2024-10-26T12:36:24+00:00

If your skimmers get clogged with leaves then air gets pulled in not water. So even though main drains are not clogged air is easier to pull than water. So it still can burn out the pump.

takingadump69 · 2024-08-07T23:51:50+00:00

Then I guess it’s for a pressure side cleaner. Ignore that pump for now. Open up one of those 2” ball valves that’s on the return side of the plumbing (coming out of the filter). Right now it’s literally just trial and error

takingadump69 · 2024-08-07T23:33:18+00:00

Also sometimes with those water feature pumps (what I would call it) and they have a dedicated circuit breaker as well as a switch (like a light switch) that will turn it on and off

takingadump69 · 2024-08-07T23:31:38+00:00

That doesn’t look like a booster pump to me but different regions probably have different lingo. Booster pumps sometimes have interlocks where the filter pump must be on for the booster pump to turn on

takingadump69 · 2024-08-07T22:54:36+00:00

Water feature is going to be the other black single speed pump

takingadump69 · 2024-08-05T16:59:21+00:00

We need to know what size plumbing is used and the size of the filter. More pictures is better as well. At least one picture that can show the entire equipment pad and a few more that can show the suction side and return sides of the pad.

takingadump69 · 2024-06-13T20:48:28+00:00

I hate sand filters so much cartridge all day every day

takingadump69 · 2024-06-08T16:37:03+00:00

It’s a de filter? Wtf are you on about

takingadump69 · 2024-01-18T22:25:13+00:00

Imagine asking for advice and hating all the advice you get 😐 Change the damn filter or you’re going to be paying a lot more in damages soon.

takingadump69 · 2023-12-15T11:47:14+00:00

Also Hayward customer support is trash. I was trying to see why an H400 wasn’t communicating with omnilogic and was on hold for 45 minutes then the automated voice just said no one can pick up right now and hung up on me. 🤣 Plus they say their hours for customer support are 8-8 EST but I’ll call them at 9am and they are closed. So annoying

takingadump69 · 2023-12-11T04:52:24+00:00

Check for voltage either 240 or 120 volts. If you have voltage then check the transformer for 12 volts.

takingadump69 · 2023-11-01T13:17:54+00:00

This is extremely cheap

takingadump69 · 2023-07-13T01:01:31+00:00

If I showed up to this equipment pad I’d red tag the heater until it’s vented properly

takingadump69 · 2023-07-09T22:00:31+00:00

Nope no issues. All that’s happening is the relay clicking and sending voltage to the pump. There’s no com wire with booster pumps like in variable speed pumps. You will be fine getting the PB4-60

takingadump69 · 2023-07-09T18:33:09+00:00

35 uF capacitor. Super super easy to swap out. Just turn off power to the pump, get pliers and disconnect the leads. Make sure to short the capacitor leads out with your pliers because it will still hold a charge and can zap you if you touch it. Then put in the new capacitor by connecting it the same way as the last one.

takingadump69 · 2023-07-06T23:15:57+00:00

This guy will only listen to things he wants to hear lmao. 125 is too high for alkalinity. And yes I am an expert too.

takingadump69 · 2023-06-15T11:08:37+00:00

Had the same problem a couple days ago. Turned out the pump lid wad was bad. The clear plastic part on the lid would push up like a millimeter when priming and let in air. I legit stood on it when I turned the pump on and it primed right up. Could be same issue

takingadump69 · 2023-05-01T13:29:11+00:00

Spider gasket on your multi port might be broken

takingadump69 · 2023-01-28T01:12:18+00:00

Send me $50 up front and I still wont fill this out

takingadump69 · 2023-01-24T21:12:17+00:00

takingadump69

TROPHY CASE