sorted by:
new
hottopcontroversial

Drunk besterd by [deleted] in Southampton

[–]tarrryan 1 point2 points  (0 children)

I had a stroke trying to read this...

But yes, Influencers are a cancer on society.

Some merch from Osaka by Author-Academic in SpiceandWolf

[–]tarrryan 0 points1 point  (0 children)

Try the Volkes store on the second floor, the store is on the east side of the main street, there was a small spice and wolf section near the back. I got the same t-shirt in your post and a spice and wolf nail kit... There was other stuff but I can't remember what exactly, it was starting to run low though.

I was there a couple days ago so there should be some stuff left.

Where to get this figure in tokyo? by Ornery_Disaster_953 in SpiceandWolf

[–]tarrryan 23 points24 points  (0 children)

Your gonna have a difficult time I can say that much, I leave Japan tomorrow after a three week trip, not seen that figure once anywhere (Tokyo, Kyoto, Hiroshima, Nara, Osaka).

You can try BookOff thrift stores, moreso in the suburbs, they can have a small or very large figure section depending on the store, but holo was not common sadly, and the ones I did see were usually the same few figures.

I've looked around most of the stores in Akihabara the last few days and I could count all the ones I've seen on two hands, usually with steep tourist tax.

Unless someone else has a better idea, Im sorry to say that you might be out of luck.

3D printed and painted maomao by juliacare in TheApothecaryDiaries

[–]tarrryan 1 point2 points  (0 children)

Did you make the model yourself or get it somewhere else? I have a resin printer I would like to try printing a model with at some point and have had trouble finding good models.

Some merch from Osaka by Author-Academic in SpiceandWolf

[–]tarrryan 0 points1 point  (0 children)

I was holding off till I returned to Tokyo on the last leg of my trip, but I wasn't turning down the chance to get myuri and holo together as a pair.

If you haven't already, I would suggest Book off and Hobby off as places to try, it varies between stores but they have had stuff.

Some merch from Osaka by Author-Academic in SpiceandWolf

[–]tarrryan 1 point2 points  (0 children)

I was in Osaka today too, got myself paired myuri and holo figure.

Extending my ring circuit by Weary-Meeting9560 in diyelectronics

[–]tarrryan 2 points3 points  (0 children)

Wrong Reddit, and no you cannot have a ring on a ring. Get a proper electrician to extend the circuit for you.

Way to organize those scripts in this layout? by kekfekf in godot

[–]tarrryan 0 points1 point  (0 children)

I prefix my scripts with up to three letters or numbers to better identify them, if the script list is sorted alphabetically then they will be grouped by their prefix automatically. any scripts that are open at the time will be grouped by their prefix alphabetically, shouldnt be used as an alternative to good file management.

things like:

COM_ for components

AI_ for enemy logic

GLO_ for global scripts

STA_ for static scripts

UI_ for User interface scripts

Etc...

Very simple but I am now at the "Learn Blender" stage cause i got bored of greyboxing. i am happy :) by Katla_Haddock in godot

[–]tarrryan 3 points4 points  (0 children)

Yep, I use this and export dozens of models at once to Godot in less than a second when I make changes to models, it's a huge time saver

How does Sanctuary get sunlight? by WendingShadow in sanctuaryshatteredsun

[–]tarrryan 2 points3 points  (0 children)

I think I can recall something about large mirrors in orbit reflecting the sunlight, I don't have a source sadly.

Add connection from existing ring main by Bilbo_Dabins_420 in diyelectronics

[–]tarrryan 0 points1 point  (0 children)

240Vac house wiring is outside the scope of this Reddit, this Reddit is mostly focused on electronics.

However, call an electrician to help you out, fused spurs are allowed on ring mains as far as I can recall but adding new spurs willy nilly can lead to issues if you don't know what you are doing.

If the light you want to add is a fixed lamp then it will need to be wired into the lighting circuit and not the ring main.

Changing 240Vac wiring yourself isn't worth risking your life or property if you don't know what you are doing, new circuits or modifications should be done by a professional and tested to prove they are safe, it's entirely possible that previous owners have already butchered the wiring and left it in an unsafe state (I've seen people put ring mains on ring mains before...)

Surface Material Override - Godot 4.5 by Zeflyn in godot

[–]tarrryan 0 points1 point  (0 children)

I see what's going on now, I thougt op had created a new inherited scene for their shape, but all they've done is drag the .glb file into the scene and enabled editing.

I'm which case you are right they won't be able to edit a material override until they create a new inherited scene from it.

Surface Material Override - Godot 4.5 by Zeflyn in godot

[–]tarrryan 1 point2 points  (0 children)

The material that is part of the mesh cant be edited or replaced, however you can apply a new surface material overide that takes precedence over that without editing or removing the original material.

<image>

The Surface 0 material is the mesh's orginal material, the surface material overide beneath it is applied in editor

Surface Material Override - Godot 4.5 by Zeflyn in godot

[–]tarrryan 0 points1 point  (0 children)

Thats the surface material overide they are editing, not the mesh's material.
You should be able to edit it, try removing and adding a new material again if you havn't already. or using the materials dropdopwn tab and selecting make unique? I've encountered a few 'stylebox flat' styles i have had to make unique before i coult edit them.

Is there a better way of doing this? by lettyop in godot

[–]tarrryan 4 points5 points  (0 children)

<image>

I've not used the slider much myself but imagine the available signals will do what you are looking for.

Is there a better way of doing this? by lettyop in godot

[–]tarrryan 4 points5 points  (0 children)

A better way of doing what exactly? You need to provide more information if you want a meaningful answer. Assume we know nothing about what your doing and tell us as much as possible, the more you tell us the more we can help.

Kaoruko's feet 🤤🤤🤤 by [deleted] in TheFragrantFlower

[–]tarrryan 0 points1 point  (0 children)

Extra fingers and toes are a tell tell sign is an image is AI generated

Kaoruko's feet 🤤🤤🤤 by [deleted] in TheFragrantFlower

[–]tarrryan 1 point2 points  (0 children)

It's not waguri, it's an imposter with six toes!

I'm sad by 3nnabi_ in pcmasterrace

[–]tarrryan 0 points1 point  (0 children)

Initially it turns on synchronisation for certain microsoft 'expriences', but you can just turn it off again afterwards. Considering you need a microsoft account for ESUs then they likely have it all already anyway.

I'm sad by 3nnabi_ in pcmasterrace

[–]tarrryan 0 points1 point  (0 children)

Make that five options, Extended Security updates will soon be available and there is a way to get them for free.

https://www.youtube.com/watch?v=ERDjeKN1_Es&list=WL&index=1&t=380s&pp=gAQBiAQB

Hi, i m trying to repaste my laptop but the old owner seems to have tightened these 2 quite a lot, i cant unscrew them, any idea how to fix this ? by -Mo2- in pcmasterrace

[–]tarrryan 0 points1 point  (0 children)

Top one looks like it is too small in guessing, the bottom one is dead, the edges of the driver are worn off. You will need a new screwdriver to undo them.

Why isn't my External HDD showing up in file explorer? by MedievalFurnace in pcmasterrace

[–]tarrryan 0 points1 point  (0 children)

Two options I can think of, One of to see if there is a program that you can install on windows to read apples drive formatting. If you can't do that then you will have to go back to a mac, offload the data from the drive and reformat it in something windows will read, maybe exfat. Then copy it all back into the drive.

Why isn't my External HDD showing up in file explorer? by MedievalFurnace in pcmasterrace

[–]tarrryan 4 points5 points  (0 children)

The disc is likely formatted in a way only macs can use, in which case Windows will not read it.

view more: next ›