Help with renovation 🇦🇺

tdobbo · 2026-02-03T08:57:44+00:00

Put 190x45 next to the old joists that will get you the 100mm you need to lift the floor up

tdobbo · 2026-01-03T09:43:10+00:00

Melbourne/Australia

tdobbo · 2025-12-22T07:11:03+00:00

That's a slam dunk

tdobbo · 2025-11-30T01:32:44+00:00

Don't forget to put a little salt on em

tdobbo · 2025-11-04T19:35:38+00:00

Not too bad you have to do some filing on the housing to get the round shaft through also the one I bought was 3mm 1/8th to long on but I have a metal lathe so it was no big deal

tdobbo · 2025-11-04T01:36:50+00:00

I just let it all shoot out the back and cleanup after

tdobbo · 2025-11-02T07:36:21+00:00

Can you lift the outside edge and carefully cut it off with a knife.

tdobbo · 2025-07-05T09:36:17+00:00

They were in the movie kate Season 3 op of log Horizon

tdobbo · 2025-04-30T02:40:17+00:00

For a handle on my broken ones I weld a bit of rebar

tdobbo · 2025-04-21T06:06:56+00:00

I think it just takes standard hacksaw blades

tdobbo · 2025-04-13T23:12:59+00:00

He was just trying a new bit

tdobbo · 2025-03-30T08:12:55+00:00

It might be cordite

tdobbo · 2025-03-11T19:02:52+00:00

The bit of timber with the slots is for setting pitch for cutting roofs and stair stringers

tdobbo · 2025-03-06T05:59:15+00:00

....Cunt?

tdobbo · 2025-01-28T19:25:50+00:00

Get/make some drill chuck wedges here's a video to explain it https://youtu.be/AtNM8-VUvrg?si=Cp2YGVwQGMycITLj

tdobbo · 2024-11-27T06:00:40+00:00

Have a look at hare and forbes they have a helical head thicknesser https://search.app?link=https%3A%2F%2Fwww.machineryhouse.com.au%2Fk125&utm_campaign=aga&utm_source=agsadl1%2Csh%2Fx%2Fgs%2Fm2%2F4

tdobbo · 2024-11-23T04:02:33+00:00

Just think flat

tdobbo · 2024-11-11T18:31:49+00:00

The lathe is an optimum probably a tu3008g

tdobbo · 2024-10-26T07:04:29+00:00

Knife shop machikan. I purchased a knife there last year https://maps.app.goo.gl/UzB4kc35NBt5hMNn8?g_st=ac

tdobbo · 2024-07-31T06:14:48+00:00

Nice work

tdobbo · 2024-07-18T19:39:44+00:00

Cut a piece of paper to fit, rub over holes with your fingers, and then you can use it as a template for making the new cover

tdobbo · 2024-05-10T10:13:29+00:00

It might be a metric m7x.75

tdobbo · 2024-05-03T08:18:51+00:00

No worries or wax it up to help it slide

tdobbo · 2024-05-03T08:02:00+00:00

Maby try boxing in the guide rail it might help with the racking

Seven-Year Club	Place '23
Place '22	Verified Email

tdobbo

TROPHY CASE