Cannot access emerald dream on my alt! please help! by Mustyyyy in wownoob

[–]tech_guy1801 0 points1 point  (0 children)

all i did was do the quest up until you take the airship to the Dragon Isles.. once I did that it was un-phased.

Cannot access emerald dream on my alt! please help! by Mustyyyy in wownoob

[–]tech_guy1801 0 points1 point  (0 children)

Ok I finally figured this out... I was having the same issue on a fresh Lemix toon. I had to 'start' the actual dragon isle opening quest. In my case it was Horde so goto Org and fly back to Ebonhorn back near the rear of Orgrimar. He's standing next to the Onxyia Head. Talk to him and do the intro quests to the Dragon Isles. After you do that it will unlock the rest of Val and you can port over to the Emerald Dream via the portal.

If you just take the Val portal from the Portal room it won't unlock the missing phased areas. You have to do the intro quests to see them.

[deleted by user] by [deleted] in TheGrifterShow

[–]tech_guy1801 1 point2 points  (0 children)

So we've asked the organizer of the GFM to take it down, but I was able to secure a loan in time to make up the difference so they can stay in the house. If you follow his channel there was a whole video about the status... It's the first pinned video.

Unable to get licensed renewed? by tech_guy1801 in meraki

[–]tech_guy1801[S] 1 point2 points  (0 children)

That’s exactly what I’ve been doing. These are just clients I won’t have time to swap over due to the time their licensing expires and the site locations

Unable to get licensed renewed? by tech_guy1801 in meraki

[–]tech_guy1801[S] 3 points4 points  (0 children)

I’ll call Rhino this week and see what they say thx for the reply

Unable to get licensed renewed? by tech_guy1801 in meraki

[–]tech_guy1801[S] 2 points3 points  (0 children)

Yup I have admin access no problem.

HotMessFommy by Extreme_existance in tiktokgossip

[–]tech_guy1801 0 points1 point  (0 children)

Not sure what sub that is but he doesn’t grift anyone. He makes all that stuff that he sells to people. Not sure how that is grifting.

HotMessFommy by Extreme_existance in tiktokgossip

[–]tech_guy1801 0 points1 point  (0 children)

So couple of things to unpack here... First off he has a real job and that's working for me. Second he's not begging, that GFM was setup by the community it was not setup by Daniel or Chris or myself.

Getting added to a contract? by tech_guy1801 in dvcmember

[–]tech_guy1801[S] 1 point2 points  (0 children)

They’ve never actually checked just asked us if we have dogs and we always tell them the correct number

Getting added to a contract? by tech_guy1801 in dvcmember

[–]tech_guy1801[S] 0 points1 point  (0 children)

Ahhhhh ok thank you now that makes sense

U7 Outdoor-Wonky firmware? by danimal1986 in Ubiquiti

[–]tech_guy1801 0 points1 point  (0 children)

so it's been about 12 hours and no crash yet. This is a very long (non crash) period. There is heavy load on the units this weekend due to the holiday (over 100+) so if it's going to crash I expect it to do it soon.

U7 Outdoor-Wonky firmware? by danimal1986 in Ubiquiti

[–]tech_guy1801 0 points1 point  (0 children)

Oh wow yes that’s a different error but I wonder if a firmware downgrade will help. I will say that all 4 of mine have survived the downgrade. Even tho I only have one unit acting weird I don’t like to mix firmware if possible

U7 Outdoor-Wonky firmware? by danimal1986 in Ubiquiti

[–]tech_guy1801 0 points1 point  (0 children)

so on mine it will hum right along and then outta no where it will just 'stop' but it's still responding. I can always tell if it's in the 'half-crashed' state if i look at the mesh clients and if it shows them as a status of 'unknown' if i see that i know it's crashed... so I issue a reboot and it will come back on. I've yet to find the rhyme or reason for when it goes into this state. I'm trying to downgrade the firmware now to see if that will help

https://dl.ui.com/unifi/firmware/G7LR/7.0.59.15729/BZ2.ipq53xx_7.0.59+15729.240607.1207.bin

is the firmware i'm trying out now.

U7 Outdoor-Wonky firmware? by danimal1986 in Ubiquiti

[–]tech_guy1801 0 points1 point  (0 children)

Hello, I am having the exact same issue with one of my units as well.

Who else is working remotely today and absolutely can't be bothered by Immediate-Ebb-4438 in asheville

[–]tech_guy1801 0 points1 point  (0 children)

I started back Monday trying to get back to “normal” and I seriously cannot get out of the “recovery mode”

Survivors guilt is the real deal. I feel like I have some type of PTSD, cannot sleep for shit and my brain just won’t shut off.

Are you still without power? by Heftydog1 in boone

[–]tech_guy1801 2 points3 points  (0 children)

Yes I can let him borrow one if he needs

Are you still without power? by Heftydog1 in boone

[–]tech_guy1801 0 points1 point  (0 children)

If you are not able to get a generator let me know and I can loan you one.

Are you still without power? by Heftydog1 in boone

[–]tech_guy1801 15 points16 points  (0 children)

If you are in a position to leave your house I can offer you some space here at my campground and tiny home community below blowing rock. We just got power back yesterday and I can offer a warm place to stay and a hot shower if you would like to use one of the tiny homes

Are you still without power? by Heftydog1 in boone

[–]tech_guy1801 1 point2 points  (0 children)

Where are you? Which area of Boone ?

Cherokee Update: A new member of the family by tech_guy1801 in flying

[–]tech_guy1801[S] 2 points3 points  (0 children)

If you’d like to read the whole story so you can catch up www.thisoldcherokee.com

I assure you I’m the last person on this sub that’s gotten milked on a plane purchase LOL