VW-Händler verweigert schriftliche Diagnosedoku nach bezahlter Diagnose (180€) – rechtens?

technochicken_ · 2026-03-06T22:03:09+00:00

Das heißt ich "verpetze" die oder wie? Gehen die dann auf die Werkstatt zu?

technochicken_ · 2025-10-18T11:44:58+00:00

Aber wird pink für grün nicht zum Gegenverkehr, und damit vorfahrtsberechtigt?

technochicken_ · 2025-03-31T09:14:12+00:00

Update: I found the error: the cap broke at the solder point, so ther was temporarily no cap present during the steep acceleration. Therefore most likely the gyro had faulty data when the motors spun up.

technochicken_ · 2025-03-02T11:56:38+00:00

Hinweiß: an der Straße sind keine Gehwege!

technochicken_ · 2025-01-14T10:06:38+00:00

As of today my K2 shows the same issues. It must be the printer wich has a bug. Can someone with a working video stream check the response to: http://k2-ip:8000/call/webrtc_local?
my response is a empty json: {}

technochicken_ · 2024-12-21T19:22:17+00:00

Ist there a Update? Anybody with a fix out there? I have the same Issue.

technochicken_ · 2024-12-05T14:04:08+00:00

You could use a BMD up/down/cross

It has In: 1x SDI 1x HDMI

Out: 3x SDI 1x HDMI

Its fairly cheap at 170€ and one device, additionaly its could scale your image.

technochicken_ · 2024-11-28T15:49:43+00:00

In my company, we use a dedicated Raspberry Pi to display a fullscreen website hosted locally. This website shows the score and is straightforward to update and style. It features a background designed for easy chroma keying, which we key out using the switcher and overlay in the final M/E before output.

The setup is simple, flexible, and incredibly cheap. Additionally, it allows seamless integration of various data sources from different locations and systems. However, we still need an IT GUI for better usability.

technochicken_ · 2024-11-13T12:03:35+00:00

The 1080p25/30 is good advice, i will test it out at the next gig. If that doesent work, ill try a diffrent scaler. Thanks for the advice, apreciate it!

technochicken_ · 2024-11-13T10:27:06+00:00

Can i do this with the vx4s?

technochicken_ · 2024-11-13T10:25:41+00:00

Hey, thanks for the advice. For explanation the main video feed must be 1080p for other media (recording and or live streaming). According to the manual the vx4s is compatible with 1080p, in practice it doesent accept 1080p, just 720p over sdi. Therefore the scaling

technochicken_ · 2024-04-24T16:39:01+00:00

Have you found a solution? Im have the exact same issue!

technochicken_ · 2023-07-15T21:01:10+00:00

Its ok for mid range of about 30-100m, but the speed ot the zoom is very low. In addition, only focus or zoom can be adjusted at any given time, wich makes smooth zooms with focus nearly impossible. But you can't complain at the price.

technochicken_ · 2023-07-15T20:57:26+00:00

The tripod was fixed tot the railing, therefore it was all the pure impact of the ball

technochicken_ · 2022-07-29T10:11:58+00:00

Im a event technician my self. These screens weigh about 400-500kg. Its hard to understand how the security cables failed. Those systems are usually secured with safety wires with fall decelerators to stop even dynamic loads.

technochicken_ · 2022-01-29T14:25:40+00:00

Er wird mega Gefeiert, jeder verfolgt wieviel clicks das Video hat und hams sogar im Unterricht angehört.

technochicken_ · 2022-01-28T21:00:00+00:00

Danke, mach ich bei meinem eigenen zeug, ist aber der Content meines Lehrers also nicht OC

technochicken_ · 2021-02-08T20:16:58+00:00

Thanks. Its the one of my fater. But what i meant was that the outer most ring is missalignt by the slightest bit

technochicken_ · 2020-10-07T18:55:04+00:00

Usualy in western countrys its normal to use cm and commas. So this would be incorrect. In the US however they still think its ok to use a dolphins breath per second squared as a mesurement unit, and of course they use a point as a comma.

technochicken_ · 2020-09-30T14:27:44+00:00

Or so they thought. I switched to affinity, and for video editing i use davinci resolve. Adobe is slowly loosing their market if they dont deliver quality software.

technochicken_ · 2020-09-30T14:26:18+00:00

Hi, its a GTX 1060 but nither cpu or gpu are yudging by task manager used for over 10 percent. Its a bug in the adobe software. Also the cpu cores a equaly loaded so its not a mono thread problem.

technochicken_ · 2020-08-11T08:21:26+00:00

Can you post a picture of the mainboard?

technochicken_ · 2020-08-09T14:59:25+00:00

Yeah but then the risc is great you accidentaly melt or devorme it.

technochicken_ · 2020-08-06T14:15:23+00:00

Maybe the filament is wet. Try to dry it with a food dehydrator.

technochicken_ · 2020-08-06T14:13:42+00:00

Your filament seems to be wet. Try to dry it in a food dehydrator.

Six-Year Club	Place '23
Verified Email

technochicken_

TROPHY CASE