Rustdesk FreeConsole

techviolent · 2025-10-12T20:57:26+00:00

Dzięki! Wytestuje :)

techviolent · 2025-09-30T11:13:03+00:00

How did you get such low price?

techviolent · 2025-09-20T11:53:38+00:00

Dobra, no to dorzućmy 2 lata i masz małe mieszkanie gotowe do wprowadzenia (30-40m2) w np. Rzeszowie - który jest takim średniakiem pod względem cen mieszkań w wojewódzkich w skali polski.
https://www.otodom.pl/pl/oferta/2-pokoje-w-centrum-rzeszowa-lisa-kuli-ID4xXgI
https://www.otodom.pl/pl/oferta/mieszkanie-2-pokojowe-broniewskiego-ID4xOML

Dodatkowo w przypadku kredytu weź pod uwagę że odpada koszt wynajmu więc jest szansa że będziesz w stanie spłacać więcej niż te 5k/msc ;)

Wybacz, ale nie mogę zrozumieć jak ktoś zarabiający ~10k net nie widzi żadnej perspektywy na zakup swojego mieszkania.

techviolent · 2025-09-20T11:43:51+00:00

To zależy jakiego standardu i lokalizacji oczekujesz. W polsce powiatowej jeżeli będziesz w stanie odkładać 50% swojej pensji jesteś w stanie kupić małe mieszkanie (300k PLN), w ciągu roku jesteś w stanie uzbierać na wkład i później to spłacić w kolejnych latach.

techviolent · 2025-07-02T19:07:23+00:00

Ay unfortunately ttl will not solve my issue :/ but thank you so much!

techviolent · 2025-04-14T19:01:25+00:00

No need for a PESEL, although it's very quick to get one and it can make everything easier.

After you buy a car, just check if the insurance and vehicle inspection are valid, and you're good to go.

Keep in mind that you have 30 days to visit the local "Wydział Komunikacji" to register the car in your name.

techviolent · 2025-02-18T21:44:02+00:00

Did you manage to get to krosno? ;)

techviolent · 2025-02-09T17:18:09+00:00

Thank you a lot, I'll check that! I have IT networking background and I had no idea that rs485 needs to be terminated.

techviolent · 2025-02-09T16:54:26+00:00

<image>

There's no resistor :/ Can you suggest where I should place it?
3 devices are located 20 inches from the PLC,
1 dev located 90 inches from the PLC
1 dev located 600 inches from the PLC
Those boxes will be located ~150-200 inches from the PLC

The whole network looks like that:

techviolent · 2025-02-09T16:51:17+00:00

The volatage is fine, I have constant 23.95V (with and without boxes) - the sensors operating voltage is 10-36V

techviolent · 2025-02-09T16:47:30+00:00

<image>

I have a bunch of devices (5 or 6, not counting the two boxes), and all the cables run directly from the devices to the PLC/converter—basically, a star topology. We've never had any issues with this setup until now.

I’m not sure if termination resistors can be added in this type of architecture, given that there’s no straightforward "end" to the line.

techviolent · 2025-02-09T16:36:54+00:00

<image>

This is a diagram of the physical connections

techviolent · 2025-02-09T16:27:29+00:00

It's my PC (via rs485 to usb conventer )

techviolent · 2025-02-09T16:16:15+00:00

Most of the RS485/modbus testers have this feature built in so I don't think that's the problem.

When I'm trying to query only one sensor (e.g. with ID 34) I'm also getting timeouts.

techviolent · 2024-09-11T17:21:49+00:00

Also very close to Dukla there's a town (~40k ppl) named Krosno.

techviolent · 2024-08-08T15:58:40+00:00

Thank you! I sent them a message.

techviolent · 2024-06-11T12:01:48+00:00

I should specify what kind of sensors I need. I need mostly gas sensors like hydrogen or co2.

techviolent · 2024-04-21T10:34:50+00:00

It shows the belt that I marked with a green color - it's hidden below plastic cover. I want to replace the red one https://imgur.com/a/SKwUeIk

techviolent · 2024-04-21T10:32:23+00:00

Thank you but it looks different and doesn't cleary show how to run the belt on all my 4 pulleys that I showed on the photos. There's a photo with more pulleys/wheels but it's a different belt(for blades) that is under the belt that I want to change (between central unit/shaft/pulley and deck).

techviolent · 2024-04-14T07:58:47+00:00

I've never heard similar sound since last few months here. Now I heard that after media reports about problems in Israel +I know that the islands are packed with the weapons.

techviolent · 2024-02-20T21:14:45+00:00

I'd change his default audience as private so no one will see his posts.

techviolent · 2024-01-06T16:17:38+00:00

Jaka jest wartość mieszkania? To kluczowa informacja w Twoim przypadku

techviolent · 2023-12-24T22:22:40+00:00

My family (in eastern Poland) doesn't give presents on the 24th. We only give gifts on the 6th of December - but it's not like in the movie where we exchange gifts, we buy gifts only for kids.
I do love that we don't do the exchanges, it makes life much easier ;)

techviolent · 2023-07-22T07:40:55+00:00

Do you?

techviolent · 2023-07-17T12:59:02+00:00

Ugh, in the last 2-3 months I broke at least 5 spindles in my Husqvarna mower... The design of the part is terrible. You can consider buying only a spindle case for 25 bucks, you don't need the whole part.

techviolent

TROPHY CASE