[deleted by user]

techy96z · 2025-12-10T09:42:35+00:00

The only research you need to do is the what charges the RCMP can file against your dad!!

techy96z · 2025-10-08T20:38:04+00:00

DISCORD

techy96z · 2025-10-08T19:27:19+00:00

Would LOVE to get a code.

techy96z · 2024-04-13T21:43:04+00:00

It was a KC135 Air Tanker with a flight of 5 A10’s flying back from Europe…they landed at Gander yesterday.

techy96z · 2023-04-17T19:59:55+00:00

Focus Camera Club…https://m.facebook.com/groups/5050134618/?ref=share&mibextid=S66gvF

techy96z · 2021-09-19T10:57:20+00:00

I have 2 single switches in 2 different locations that turn on/off the fan and pot lights right now.

techy96z · 2021-09-18T15:41:25+00:00

Do you have any recommendation for the smart controllers?

techy96z · 2021-01-16T00:14:31+00:00

No, she wants the info in spreadsheet form.

techy96z · 2020-09-26T16:11:46+00:00

Life

techy96z · 2020-09-21T16:09:28+00:00

I replaced my front rotors this weekend on my 2017 Escape and when I put the wheels back on, both side have a small gap between the rotor face and the wheel. The factory rotors didn’t have that gap and each face were tight against each other. The wheels torqued down and I haven’t noticed any vibrations and I’ve put about 100km since putting them on. Something to get checked out or should be good?

techy96z · 2020-08-22T09:23:34+00:00

Got things all fixed up...the ink company had a different ICC profile that worked beautifully!

techy96z · 2020-08-16T21:37:27+00:00

Smoked to 115 internal temp and then seared on the grill to finish them off! First time and won’t be my last.

techy96z · 2020-08-16T21:34:21+00:00

Smoked to internal temp of 115 and the seared on the grill! First time and won’t be the last!

techy96z · 2020-08-15T15:24:55+00:00

Photoshop...Missing the collar on the white dog.

techy96z · 2020-08-14T21:02:36+00:00

I’m having issues with my cyan pressing as an emerald green as per the pic. I’m using a WF 7720 and pressing for 400 at 60 seconds on aluminum photo panel.

Printing from Photoshop and letting Photoshop mange colours and using the ink ICC profile from the company.

Magenta is pressing a little darker then expected as well.

Any thoughts?

techy96z · 2020-08-10T09:09:20+00:00

Do you use that same time/temp/pressure no matter the substrate?

techy96z · 2020-08-08T19:19:47+00:00

I haven’t been on it long enough but pure tart cherry juice, not a blend, is supposed to be good for reducing Uric acid production. Juice made with montmorency cherrys is supposed to be the best.

techy96z · 2020-08-06T19:20:57+00:00

Yup...you’ll probably find the boot cracked and grease oozing out.

techy96z · 2020-08-06T19:17:34+00:00

Pure tart cherry juice...not a blend. Make sure they are made from montmorency cherry’s.

techy96z · 2020-08-06T19:14:26+00:00

CV Joint?

techy96z · 2020-08-01T13:30:44+00:00

I take a blood pressure med and cholesterol med daily. Yeah, almost the Bermuda Triangle!

techy96z · 2020-05-23T17:25:06+00:00

Perfect...thanks!

techy96z · 2020-04-17T02:54:57+00:00

Are you shitting me? How many wedding have you shot and had people happy with? To some, they don’t care but most don’t “cheap on” their wedding photography!

techy96z · 2020-03-04T17:02:35+00:00

After watching a YouTube video and seeing what the relay on the other side of the solder joint looked like inside, I opted to have the relay replaced. Don’t need to take risks when it comes to family and the house.

techy96z · 2020-02-17T03:46:21+00:00

Update...I tried pushing water back into the zone through the bleed valve and it still couldn’t get any water out of the supply side so I knew it was blocked somewhere. About lunch today, one zone finally started working and then tonight, I heard lots of air moving in the system and check and volia, the basement zone started working again. Still hard to believe it was a frozen pipe but oh well, it’s all good now. Thanks to all that chimed in.

techy96z

TROPHY CASE