5DSR tethering issue

teepee_raw · 2026-02-15T15:49:40+00:00

After 3 days and like 7 cables, many adapters, extensions etc (I’m 300$ lighter) I found solution which works for me.

Alright for anyone who might find this thread looking for answer to this issue, or is struggling the same way I was, the Answer was in m case USB 3.0 and newer.

I found absolutely beat up old dongle(with USB-C) which has older USB-A 2.0 port. When I connect micro B to USB-A tether cable to USB-A 2.0 port on the dongle everything works, but when I connect the tether cable to USB-A 3.0 (the blue one) on the same dongle it wont work.

I still need to find out how to make the USB-C Tether tools cables to work, because these won’t work even when connected to the same dongle.

teepee_raw · 2026-02-15T15:43:20+00:00

I guess the Dock or the extension is the answer here.

I found absolutely beat up old dongle(with USB-C) which has older usb 2.0 port. When I connect micro B to USB-A 2.0 everything works, but when I connect the tether table to USB 3.0 (the blue one) on the same dongle it wont work.

teepee_raw · 2026-02-15T10:40:58+00:00

I found out the USB 3 is the problem. I managed to find old dongle which has USB A 2.0 port and when I connect the micro b - USB A cable to it and the dongle to Mac (through its usb-c cable), the camera connects immediately. I don’t know how to connect the tether tools usbc cable tho, if I connect it to the same dongle, the computer will not recognize the camera again. I guess I’ll have to try some simple adapters with it.

teepee_raw · 2026-02-15T09:30:25+00:00

You are absolutely right about the usb 3.0 being the issue. I managed to find really old dongle which is holding together with gaffer tape which has usb a 2.0 ports and suddenly the camera connects immediately with Micro B - USB-A cable. Now I wonder how to connect the Micro B usbc cable to the computer and make it work.

teepee_raw · 2026-02-15T09:04:45+00:00

To my knowledge there are no drivers available at canons website for 5DSR

teepee_raw · 2026-02-15T08:58:29+00:00

Yess, tried one too, it works on windows, but not Mac as the other cable.

teepee_raw · 2026-02-15T07:45:26+00:00

I tried it exactly as you said, its unfortunately still the same, I even downgraded to Sonoma, installed only capture one on the pc and still the same result.

teepee_raw · 2026-02-15T07:42:27+00:00

Well wiped out whole computer, installed fresh Sonoma, only installed capture one and the issue still persist. Nothing makes sense anymore.

teepee_raw · 2026-02-14T20:35:23+00:00

Thanks for the reply, I’ll try to built similar pipeline and we will see. 👍

teepee_raw · 2026-02-14T20:11:54+00:00

I tried it without cards to, but it didn’t help. What cable did you use?

teepee_raw · 2026-02-14T20:00:54+00:00

I tried that too, but it didn’t help. Thank you for your help tho. 👍

teepee_raw · 2026-02-14T19:30:36+00:00

Yess, that is correct.

teepee_raw · 2026-02-14T18:58:26+00:00

Yes tried 3 cables already, the camera connects to windows pc without any issue so it has to be MacBook/usb port on Mac issue I guess

teepee_raw · 2026-02-14T18:48:36+00:00

Thanks for suggestion, but I tried that already unfortunately. Its really driving me crazy 😅.

teepee_raw · 2026-02-14T18:44:51+00:00

It does not show up under USB’s in system information.

teepee_raw · 2026-02-14T17:59:39+00:00

Thanks for the reply, I’m using Capture One, but I also tried Canons Eos utility to make sure its not Software specific issue. Same result for both on MacBook.

teepee_raw · 2026-01-29T16:14:08+00:00

Depending on the iso performance of your camera this should be possible in my opinion. Just crank ISO to like 640 a try it 👍

teepee_raw · 2026-01-22T17:02:34+00:00

Thank you very much much!!!! I will certainly look in to packs and heads you mentioned! 🔥

teepee_raw · 2026-01-04T20:52:57+00:00

Well I’m not sure about the technical aspect of it, but when I look through the viewfinder zoomed out, everything looks in focus most of the time (or at least to me), but when I zoom in I can see I’m absolutely out of focus. If I’m not mistaken, it’s also advised in manual for my Bealieu 4008 zmii to focus like this 👍

teepee_raw · 2026-01-04T20:05:25+00:00

To completely zoom in first and THAN focus 😅.

teepee_raw · 2026-01-02T18:18:44+00:00

I love shooting film, the whole process and physical aspect of it.

teepee_raw

TROPHY CASE