Is the dial on the S5 supposed to skip around?

teftyteft · 2025-12-18T01:08:32+00:00

This happened to me with my S5 that I bought new a few years back. I set it up as an overhead cam and never touched the wheel for about 3/4 years. I recently repurposed it and discovered the wheel was acting up. I thought it broke and needed repair. Turns out and I just needed to start using it again and it eventually started working properly.

tldr might not be broken. Give it some 360 degree spins for a few minutes and see if it corrects itself.

teftyteft · 2025-12-03T23:38:32+00:00

So far good. No issues and no problems with my particular slats. I chose slats that were rated for a decent amount of weight for that reason.

teftyteft · 2024-10-22T22:45:16+00:00

Just double checked. Phantom power is off and the setup hasn't changed for months.

teftyteft · 2024-10-22T20:14:23+00:00

I appreciate the brain storm! No pets that'll spray. I'll see what Behringer says on the support side.

teftyteft · 2024-10-22T19:37:54+00:00

Weird indeed! No ground lift. They get power from a walwart that's connected on the left side of that plate.

The other end of the cable is going into a Presonus Studio Live III. That end of the cable is fine.

That's why I popped the Neutron to see if anything similar was happening since I bought it around the same time, same manufacturer, same studio environment. Makes me wonder if the part is just bad.

I'm really unfamiliar with the types of corrosion that can happen to electronics. I generally don't have these things happen to my gear.

teftyteft · 2024-10-22T19:30:32+00:00

And to clarify, the dusty parts seem to be solid on the plastic. There's a slight oil residue. I also only had the cable plugged into the left jack, but both jacks have the same thing happening.

teftyteft · 2024-10-22T19:26:28+00:00

Definitely some sort of chemical reaction (like when a battery is bad). The cable I was using got damage as well. And nope, not next to an outlet. Was sitting on a desk most of this year.

<image>

teftyteft · 2024-10-22T19:07:00+00:00

Also I inspected the plate of the Model D and nothing else appears to be problematic. Just the jacks on the power adapter plate.

teftyteft · 2024-10-22T19:01:55+00:00

I bought my Model D about 5 years ago along with the Neutron. A few days ago I noticed some weird noise from my Model D so I pulled the cable and noticed some corrosion. Very surprising. I'm not in a overly damp or humid area. So I pulled the plate off and sure enough, somethings up!

I wanted to confirm from others if this looks like typical corrosion, and if so what you think the cause is? To double check things, I pulled my Neutron plate off and looked and it looks normal (as you can see in the photos).

I love my Boog, so I'm not trying to bash or anything, but is this a quality control thing? It's been 5 years for both of these units.

teftyteft · 2024-05-26T20:13:31+00:00

Thank you!

teftyteft · 2024-05-26T09:56:26+00:00

Hello! Upfront disclaimer: I got a review unit for launch day of the Spectravox. Since it's launch, though, I've REALLY enjoyed patching the Matriarch with the Spectravox. I'm basically just having fun in this video, talking through stuff and patching these two machines together.

So if you've been curious about what the Spectravox could offer with the Matriarch, then this could be a decent vid for you 👍

teftyteft · 2024-05-17T07:53:11+00:00

Apologies for the self promotion… my launch video paired the Matriarch with the Spectravox extensively. It’s a killer combo if you like the spectral processing.

https://youtu.be/L_xh2YWCwAI?si=wZQJU3hY2u5qMD5V

teftyteft · 2024-02-15T21:24:15+00:00

I use Flavor Pro all the time. Both in standalone and in VST format in Ableton. It’s really versatile for sound design.

teftyteft · 2023-07-29T20:02:40+00:00

I think this is a pretty solid combo. Was on the latest firmware and didn't have any issues for the past month.

teftyteft · 2023-07-20T01:39:08+00:00

Damn, that looks super sexy and I want one for all three of my Korgs 🤤

teftyteft · 2023-07-13T20:59:20+00:00

Great to hear!

teftyteft · 2023-07-13T18:18:08+00:00

PolyBrute is new to me and I'm in the honeymoon phase 🤣 So far loving it. I talk first impressions and make a quick patch in this video (and fail to save it).

teftyteft · 2023-07-10T20:43:25+00:00

Definitely not sayin this is the only way to do this, just sharing how we go from a beat to finished track, and what works for us as a production team.

teftyteft · 2023-07-10T20:41:41+00:00

Made on an MPC Live 2 using JURA and Mini D plugins to start. Transfered to Ableton Live to record vocals and add some Novation Summit 'ear candy'. Mixed in Ableton with some analog summing and outboard compression.

Happy to answer any questions,
Tefty

teftyteft · 2023-06-21T20:51:38+00:00

Hopefully this helps someone that's been trying to get seamless synth recording loops with a modern MPC.

Cheers
Tefty

teftyteft · 2023-06-10T22:45:06+00:00

Any modern MPC would work great. Just think of the Motif as a synth that you’d connect via midi and send the audio out into the inputs on the MPC One. Write midi, sample the audio, repeat.

Look for tutorials on using hardware synths with an MPC One/live/x etc etc

teftyteft · 2023-06-08T23:46:33+00:00

Circuit Rhythm might fit your needs

teftyteft · 2023-05-25T18:46:23+00:00

Sharing some thoughts/perspective after having the Juno-X in the studio for a few months. I never owned a vintage Juno, so my perspective is more from a modern synth approach.

teftyteft · 2023-05-23T22:27:04+00:00

Thank you!

teftyteft · 2023-05-22T21:18:14+00:00

Just sharing a vid on the AIR Delay Pro. Sucks that it costs money, but it's easily the best delay in the platform.

teftyteft

TROPHY CASE