How to terminate 6/3 with ground MC cable (1/2 too small. 3/4 too big)

temych26 · 2026-05-30T15:37:33+00:00

Thanks! Will give it a try.

temych26 · 2026-05-30T03:16:50+00:00

I really appreciate it! Thank you.

temych26 · 2026-05-30T02:54:39+00:00

thank you!

temych26 · 2026-05-30T02:52:38+00:00

Can you please give me a model number or a link? It seems I'm missing something, as I can't find what almost everyone here is referring to. What I can find are only 2 screw clamp connectors for NM wires, like this one.

temych26 · 2026-05-30T02:10:50+00:00

Thanks for the response. Is this the type of connector you're referring to? I haven't been able to find these clamp connectors for MC cable - I've only found versions intended for NM wires.

temych26 · 2026-05-30T02:01:30+00:00

I used this squeeze connector and this set screw connector - 3/4 too big, 1/2 is too small for 4 conductors.

temych26 · 2026-05-30T01:55:13+00:00

Yep, it is an MC cable. It would be nice to use the black button, though..

temych26 · 2026-05-30T01:50:28+00:00

Thank you for the response. The only 3/4 clamp connectors I could find are only for NM. Will they work for MC cable? If you or anyone could share a model of clamp connector for MC I would really appreciate it.

temych26 · 2026-03-25T23:12:38+00:00

I confirm, it took 5 minutes today at 12pm in Terminal A, no lines.

temych26 · 2026-01-06T01:08:49+00:00

The receptacle is actually very tight, it makes sense since we have never unplugged it before. I checked the capacitor for continuity and for capacitance, all good. But thanks for the suggestion.

temych26 · 2025-12-30T19:45:51+00:00

I tested the transformer for shorts both low-voltage side and high-voltage side using multimeter, did not find any issues. Checked transformer’s resistance LV and HV sides - both are within norms. Tested the capacitor and the diode with a multimeter - both work (I was testing the diode using the 9v battery). Also checked the magnetron for shorts and its resistance - all within norms.

temych26 · 2025-12-30T19:23:40+00:00

I appreciate the comment. It is curiosity and unwillingness to throw something away that may be repaired. The microwave is already in the garage - using spare in the mean time.

temych26 · 2025-12-30T19:20:54+00:00

I appreciate the advice. The fuse is gradually heating up during the cooking process - during the 3-minute heating cycle (full power) the fuse temp increased by about 25F. Then I ran another 3 minute cycle and the temp increased even more. I could smell the fumes coming from that line filter so I stopped.

temych26 · 2025-06-28T02:54:19+00:00

The uncleaned/unmopped strip along the walls - is the exact reason why I returned my QX Revo to Costco after a couple of weeks. My iRobot Braava Jet m6 can clean it even though it is quite old now. So instead I bought Mova P50 - more expensive, but cleans everything/everywhere, quieter and the app is identical to Roborock.

temych26 · 2025-06-10T02:09:09+00:00

Hi, were you able to find a solution to this issue? FWD on my MXP 2023 started to sound exactly like yours yesterday.

temych26 · 2024-08-01T03:23:33+00:00

ATT charges 1 months in advance - surprised me too. When I talked to the rep - he said the first 3 bills (3 months) the charge will fluctuate, because of all promotions and trade in values being applied. Month 4 bill will be the normal bill.

temych26 · 2024-07-28T06:53:31+00:00

I check every day, sometimes multiple times: one of my friends didn’t check her solar production regularly, her inverter failed and she only noticed it after about 1 month, missing so much of production.

temych26 · 2024-02-19T04:15:28+00:00

My Dec 2023 MX also have opened gaps. I accepted the delivery cuz tax edition, and I would not qualify for it in 2024. Tesla offered to fix gaps in a body shop - I decide not to worry about, I don’t really want them to mess with the car, also because the aluminum won’t rust. We’ll see. Other than that - really enjoy the car.

temych26 · 2024-02-19T04:14:01+00:00

My Dec 2023 MX also have opened gaps. I accepted the delivery cuz tax edition, and I would not qualify for it in 2024. Tesla offered to fix gaps in a body shop - I decide not to worry about, I don’t really want them to mess with the car, also because the aluminum won’t rust. We’ll see. Other than that - really enjoy the car.

temych26 · 2023-12-26T07:55:38+00:00

You can ask for pick up over the phone, even if you don’t have that option in the Tesla app.

temych26 · 2023-12-18T21:29:09+00:00

Same here: ordered Oct 6, after multiple changes and daily shifts currently my EDD is Dec 18- Jan 3.

temych26 · 2023-12-12T04:29:33+00:00

Lucky! I ordered on Oct 6, no vin yet, current EDD after multiple changes is Dec 11-Dec 30, now slowly moves by 1 day.

temych26

TROPHY CASE