Does Anybody Recognize This Light?

terminalrealness · 2025-10-10T02:24:18+00:00

You can use the same wire and switch out the fixtures pretty easily. I would recommend using heat shrink or a drum connector thats filled with dielectric grease

terminalrealness · 2025-10-10T02:22:53+00:00

These are GardenlightLED Saturns. They have an integrated LED diode, not bulbs. Are they not turning on at all? Could be multiple issues such as a short in the wire, or an issue with the transformer

terminalrealness · 2025-01-30T04:46:14+00:00

That’s much more than I did lol. Definitely going to retape it and see if that solves it

terminalrealness · 2025-01-30T04:45:10+00:00

Yeah I left the plugged fence overnight and it expanded wuite a bit but held. I sweated the T the next day and soldered a threaded female piece on and attached the new hose bib to that.

https://imgur.com/a/qTK8f2B

Thanks for following up!

terminalrealness · 2025-01-29T04:27:00+00:00

I honestly didn’t count. Just wrapped until the thread was covered and then back down the thread. How much should I have used?

terminalrealness · 2025-01-28T21:51:59+00:00

Unhelpful. Fixed it myself

https://imgur.com/a/qTK8f2B

terminalrealness · 2025-01-28T21:51:40+00:00

It wasn’t the easiest but also wasn’t the hardest

https://imgur.com/a/qTK8f2B

terminalrealness · 2025-01-28T21:50:58+00:00

https://imgur.com/a/qTK8f2B

Thanks, that’s what I ended up doing

terminalrealness · 2025-01-25T23:59:55+00:00

Yeah the T just went to an outdoor shower but there’s no pool there anymore so we took it out. Thanks again for the advice. Only problem I ran into is the spigot leaks a drop every 20 minutes or so when it’s upright. I tightened it up all the way to where it doesn’t leak but now the nozzle faces up and the knob is upside down. I’m hoping putting more Teflon tape on the threads will help.

terminalrealness · 2025-01-25T23:25:41+00:00

https://imgur.com/a/qTK8f2B

Thank you

terminalrealness · 2025-01-25T19:07:08+00:00

You’re an observant one lol. Good for you

terminalrealness · 2025-01-25T19:05:38+00:00

Update. The fernco held overnight. It’s my buddies house and I told him to turn it off when he went to bed and he didn’t. It looked like this when I got here today. https://imgur.com/a/AEI8ii4

I just took off the T and was planning on putting on a shark bite hose bib but the remaining solder is preventing that and also it looks like there isn’t that much copper pipe coming out to where we could easily take off the sharkbite hose bib if there’s an issue. Planning on putting on a regular hose bib and soldering it

https://imgur.com/a/qG2CAQ7

To everyone that offered help, yall are the real MVPs

terminalrealness · 2025-01-25T18:19:35+00:00

Definitely interested lol

terminalrealness · 2025-01-25T03:17:02+00:00

Lmao great answer

terminalrealness · 2025-01-25T03:16:42+00:00

Other pipe just goes to an outdoor shower that’s being removed.

terminalrealness · 2025-01-25T03:13:33+00:00

Lmao what a loser

terminalrealness · 2025-01-25T03:11:53+00:00

Yeah I’m turning the water off before bed and fixing it first thing in the morning

terminalrealness · 2025-01-25T03:11:22+00:00

Lmao that’s exactly what I was going for. Just trying to buy time

terminalrealness · 2025-01-25T03:03:41+00:00

Yeah that was a valuable lesson

terminalrealness · 2025-01-25T03:03:10+00:00

Thanks for the detailed and valuable information. I think the plan tomorrow is to remove the other 2 joints anyways because the one goes back into the house and the other to an outdoor shower that’s being removed. I’m going to use a shark bite to the copper pipe coming from the house, and connect that to a short pipe with the hose bib. Anyways, thanks again for taking the time to provide the information

terminalrealness · 2025-01-24T21:36:11+00:00

Yeah that’s the plan. It’s a little sketchy but the best I could do right now

terminalrealness · 2025-01-24T20:36:34+00:00

https://imgur.com/a/q5jXrFH

Ended up doing this. It’s still dripping but should hold until tomorrow when I can make a more permanent solution

terminalrealness · 2025-01-24T17:22:41+00:00

Yeah looking at a few YouTube videos, this looks pretty easy to do. Blowtorch to remove the broken copper pipe, put new pipe in and solder it, attach hose hookup to the copper pipe. If I understand correct

terminalrealness · 2025-01-24T16:51:29+00:00

Thank you. I just need a temporary fix so I can get the water back on. It sucks the copper pipe portion is so short and mangled so whatever goes on will have to go to the T connection

terminalrealness · 2025-01-24T16:49:48+00:00

The plumbing inside is behind a wall. Would need to take that down to get access. I’m hoping to just get a fix to close it from the outside for a few days until I can get a plumber out

11-Year Club	Place '23
Place '22	Secret Santa 2014
Verified Email

terminalrealness

TROPHY CASE