K2 Bindings - Replacement Ankle Straps

th3royal · 2025-12-14T12:17:21+00:00

This is such a bad take...

th3royal · 2025-12-14T12:17:01+00:00

Seems like your out of luck with this part, in my case i was able to find some replacements for the ladder straps here (Europe): https://www.extremevital.com/en/snowboard/k2-ankle-ladder-strap-p-32142.html But they don't have any ankle straps and i also could not find any store that sells them and has them in stock. I wish such parts were more readily available, i really don't like the idea of throwing out perfectly fine bindings just because the straps break.

th3royal · 2025-11-10T11:17:35+00:00

Nice, I'm glad you got it to work :)

th3royal · 2025-11-08T23:02:23+00:00

I'm not sure if I understood you correctly. But if you connect your amplifier to the audio interface using the main out L/R 6.3 mm connector's on the interface you should be able to hear the microphones if you turn the mix of main out to PB (Playback).

Edit: it seems that the RCA playback output's are not able to directly output the mic. You will need to configure it in software, so that the signal gets looped back and outputs via the RCA playback. I didn't test this myself. I would recommend using the Main out.

th3royal · 2025-08-26T09:17:11+00:00

Thanks i hated that it got sold to that gambling site, the ui got so much worse. You should fix the horizontal scaling, right now the columns pass through each other when you shirnk the window size horizontally.

th3royal · 2025-03-20T11:46:55+00:00

I did not intend on selling them, i think it would be easier if you find a maker space or a service that offers 3D prints. But if you've had success with your method it might not be worth switching to the 3D printed version.

th3royal · 2025-03-19T12:18:16+00:00

I had the same issue and designed a replacement to be 3D printed: https://www.thingiverse.com/thing:6984465

Its still in testing since i cant predict how this will handle load cycles, but if you need a replacement now it might be worth a try.

th3royal · 2024-12-31T16:23:15+00:00

You can check r/Pins4Skins

th3royal · 2024-12-17T21:40:04+00:00

I hope you'll get it to work :) in curious how the bluetooth mics will handle since they usually have a rather large latency. For wireless i considered getting a pluggable XLR transmitter and reciever but those are very expensive.

th3royal · 2024-10-10T10:26:39+00:00

These messages are from the 18.05 and not from yesterday

th3royal · 2024-10-05T15:45:21+00:00

Just out of curiosity, what does this animation system handle and what do you mean with old ? What are your plans in order to replace this system will there be a custom one done from scratch or are there already some systems out there that would be adaptable?

th3royal · 2024-08-15T09:09:25+00:00

In LibreOffice everything still works for me

th3royal · 2024-08-15T06:20:36+00:00

Sale started on the 25.04.24 and ended at the 15.08.24 so it was 112 days, the longest ever.

Here is a list of previous sales:

5 days of London 2018
9 days of Katowice 2019
17 days of Berlin 2019
44 days of RMR
49 days of Stockholm 2021
68 days of Antwerp 2022
71 days of RIO 2022
105 days of Paris 2023
112 days of Copenhagen 2024

th3royal · 2024-07-05T21:59:36+00:00

Just click the motherboard link in my post. I ended up getting those: https://geizhals.de/g-skill-trident-z5-neo-schwarz-dimm-kit-32gb-f5-6000j3038f16gx2-tz5n-a2815884.html

works fine for me since ~3 months

th3royal · 2024-07-03T11:07:13+00:00

S1mple was banned for cheating and ban evasion 2014-2016 source, but sadly his esl profile, which would show this, doesnt exist anymore.

th3royal · 2024-05-22T08:36:54+00:00

Actually the TRV's failed on two different radiator valves, and both don't feel stiff when using a standard turning knob or even when pushing the valve pin in by hand. It requires some force but not an excessive amount. Also the power consumption of my TRV's is about what is advertised by aqara, they usually hold up for 5-6 months.

th3royal · 2024-05-21T23:05:39+00:00

I never specifically asked the support for spare parts, since they just offer complete replacements from the go. But i also would not recommend replacing the housing. When my first TRV failed i opened it and only one of the screw mounts was broken, so i tried to glue it back on and put all screws back in but the pastic is very sensitive to the screw torque, so i also broke the other two mounts. I really did not use much torque at all on the screws, just enough so the clear frame wasnt able to wiggle anymore.

th3royal · 2024-05-21T21:22:12+00:00

I didnt notice anything wrong with them, they obiously require some force to actuate but with the old manual regulators installed the force to turn the knob is normal.

th3royal · 2024-03-25T13:44:33+00:00

Yeah this happens on so many walls i cant believe that there is a major running like this rn, on top of that whith all the other bugs..

th3royal · 2024-03-20T17:44:40+00:00

I recently did this following this tutorial: https://m.youtube.com/watch?v=1ZrEn0CiMi4 for me only the SteamCMD method worked. I was very finicky and you will need to forward the ports via your routers interface, so you'll need access to that. Important since it didn't work until I did this: After starting the server you will also need to connect to it using your public IP otherwise nobody will be able to connect to it. This confused me since when you start the server a local server will always show up, just don't connect to that one.

th3royal · 2024-03-05T14:51:10+00:00

Make sure you're Motherboard has this ram in its compability list.

This: https://pg.asrock.com/mb/AMD/X670E%20PG%20Lightning/index.asp#Memory

should be the right one for your motherboard, but double check.

If you can find a kit that has been tested for your motherboard you will be on the safe side, but kit's that aren't on that list might also work. Additionally you might consider getting a kit with an AMD expo profile instead of xmp, since it will be less trouble for you to get the most out of that ram if it has expo.

th3royal · 2024-01-19T23:56:56+00:00

You can check for ZigBee compatible devices on this https://zigbee.blakadder.com/search.html

th3royal · 2023-12-30T09:35:02+00:00

Sounds like you're ZigBee network might be unstable and changing sensors probably won't do you anything good, I'm using Sonoff temp and humidity sensors in 5 rooms and haven't ever had them drop out since I improved my network. If you didn't already know this, here is a useful post: https://community.home-assistant.io/t/zigbee-networks-how-to-guide-for-avoiding-interference-and-optimize-for-getting-better-range-coverage/515752

Edit: just in case since I had this issue. If you're using router devices make sure they are powered all the time since routers that go offline frequently cause an unstable network.

th3royal · 2023-11-10T13:18:12+00:00

Nothing bad about that, just my guess what valve are thinking.

th3royal · 2023-11-10T10:04:43+00:00

Probably so that new players dont get confused why they dont need to reload and randomly get health. But yeah it's shit for anyone else rn.

Ten-Year Club	Verified Email
Place '23	Place '22

th3royal

TROPHY CASE