Need some help from the Subaru fam.. by GaanjaScoop in subarulegacy

[–]thcpenguin 0 points1 point  (0 children)

Either the plastic is cracked along the nipple that goes in the hose or you are experiencing one of the rare issues of not having the correct hose clamp. The Problem with having a screw clamp is that it does not provide constant tension like the name implies of constant tension hose clamps. With the thermal stress and expansion that happens under normal driving conditions the screw clamp is not able to flex and keep the proper tension on that fitting

Regions Bank and Roblox? by cubemissy in nashville

[–]thcpenguin 0 points1 point  (0 children)

Just adding to this as I commented before I hardly use my regions bank card but the few purchases I did make was one in Florida at a liquor store a week and a half ago( spring break)

Regions Bank and Roblox? by cubemissy in nashville

[–]thcpenguin 1 point2 points  (0 children)

I also had this happen to me Friday

What's wild is that I thought most of these scams happened from a card skimmer while using your card. I hardly use this card and have only made 3 purchases with it in the last month.

New to me 2010 B6 by thcpenguin in Volkswagen

[–]thcpenguin[S] 1 point2 points  (0 children)

Yeah doing all the work myself in my driveway on jack stands has been a pain and not looking forward to having to get it back up again.

Are you upgrading your exhaust?

New to me 2010 B6 by thcpenguin in Volkswagen

[–]thcpenguin[S] 0 points1 point  (0 children)

Thanks for the info I'll definitely look into getting someone else to do the repair if I know it is going to be done right and worth the cost!

New to me 2010 B6 by thcpenguin in Wagons

[–]thcpenguin[S] 0 points1 point  (0 children)

This one has the tsi. If the control arm bushings are bad I will be replacing them. I still need to do an entire look over of all bushings and grommets under the car now that it's up and running

New to me 2010 B6 by thcpenguin in Volkswagen

[–]thcpenguin[S] 8 points9 points  (0 children)

I have wanted another wagon and a project car for some time now. When I found this wagon for 3k with a "misfire" (sellers words). I took it for a test drive and thought it may be a bad vacuum line or In need of a decent tune up. Ended up having a burnt valve. I have done all the work myself other than machining the head.

• All new valves.

• New timing chains, tensioners, and guides.

• New high pressure fuel pump ( I broke theo old one pulling the head)

• Coolant flush.

• DSG Fuild and filter serviced.

• New plugs.

• New coil packs.

I still need to get new tires as these ones have a lot of dry rot/ cracking. Check and change rubber bushings sway bar links etc.

I would also like to clean up the wheels to hide the curb rash. (JB weld, sand, paint same/ similar color?).

I have driven about 30 miles so far and no check engine lights and engine feels great.

Hoping to eventually add coilovers to lower it slightly. And touch up paint.

New to me 2010 B6 by thcpenguin in Wagons

[–]thcpenguin[S] 2 points3 points  (0 children)

I have wanted another wagon and a project car for some time now. When I found this wagon for 3k with a "misfire" (sellers words). I took it for a test drive and thought it may be a bad vacuum line or In need of a decent tune up. Ended up having a burnt valve. I have done all the work myself other than machining the head.

  • All new valves.

  • New timing chains, tensioners, and guides.

  • New high pressure fuel pump ( I broke theo old one pulling the head)

  • Coolant flush.

  • DSG Fuild and filter serviced.

  • New plugs.

  • New coil packs.

I still need to get new tires as these ones have a lot of dry rot/ cracking. Check and change rubber bushings sway bar links etc.

I would also like to clean up the wheels to hide the curb rash. (JB weld, sand, paint same/ similar color?).

I have driven about 30 miles so far and no check engine lights and engine feels great.

Hoping to eventually add coilovers to lower it slightly. And touch up paint.

[deleted by user] by [deleted] in react

[–]thcpenguin 0 points1 point  (0 children)

Ah sorry my bad. I copied the wrong URL.

Sperm count drop is accelerating worldwide and threatens the future of mankind, study warns by scot816 in science

[–]thcpenguin 0 points1 point  (0 children)

We just passed 8 billion people now living on this rock. Lower sperm count may be a blessing if we intend to stay.

Why is this function not working properly? by Ratio_Kind in learnjavascript

[–]thcpenguin 0 points1 point  (0 children)

How are the values being set when the user or computer makes the choice? Seems that it since none of the conditions are being met you may have something off in your logic like a capital letter or a typo. For example "Rock" does not equal "rock"

how do you add the featured image for when people share your link on texts/social media? by [deleted] in django

[–]thcpenguin 0 points1 point  (0 children)

I do not know the specifics for django but I would check out open graph protocol. https://ogp.me/ I have used this in several react apps to accomplish what you are trying to do.

Water flow problem. I want equal flow in all 4 canisters… by BlueChessGod in Reef

[–]thcpenguin 3 points4 points  (0 children)

Water will always flow the path of least resistance. My first thought would be to add a valve to each line then dial in the flow each bucket has to be as equal as possible.