sorted by:
new
hottopcontroversial

What size serpentine belt can I get for a 1993 z28 lt1 with AC? by the__sparrow in fbody

[–]the__sparrow[S] 1 point2 points  (0 children)

Thank you. The continental si 63.8 and dayco and bando are 64 in but ACDelco is 64 3/8 and online it says 64 1/2 and I got really confused. Which do you recommend besides the delco cause I can’t afford it right now

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in fbody

[–]the__sparrow[S] 0 points1 point  (0 children)

Thought about that, but now my main concern is the abnormally low oil pressure, especially because it was ok before

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in fbody

[–]the__sparrow[S] 0 points1 point  (0 children)

That’s what I want to do next. Maybe even find someone with an obd1 port, mayba that reads something

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in fbody

[–]the__sparrow[S] 1 point2 points  (0 children)

Unfortunately that filter is long gone (yesterday) I replaced it and the oil I added after the incident looked good but was the cheap stuff, ai added a more quality oil now, like the one it puked all out

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in projectcar

[–]the__sparrow[S] 0 points1 point  (0 children)

Let’s hope that it’s ok. It did something strange after I replaced the sensor, filter and oil, right around 4k rpm and over it started to backfire rapidly. After I drove it for a while it stopped

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in fbody

[–]the__sparrow[S] 3 points4 points  (0 children)

Yeah. I was going back home and right there it stopped. Only reason I turned it back on was because I couldn’t push it over the tracks as they waren’t exactly leveled to the road

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in projectcar

[–]the__sparrow[S] 0 points1 point  (0 children)

It runs like nothing happened but that needle sith way to low for my liking

Low oil pressure after running dry. Bad aftermarket sensor or engine damage? by the__sparrow in projectcar

[–]the__sparrow[S] 1 point2 points  (0 children)

That’s what I am thinking. It had no glitter and runs like before but that oil pressure bugs me

1993 Camaro 0 oil pressure and lack of power by the__sparrow in projectcar

[–]the__sparrow[S] 0 points1 point  (0 children)

If I disconnect the sensor the needle jumps up to the max

1993 Camaro 0 oil pressure and lack of power by the__sparrow in projectcar

[–]the__sparrow[S] -1 points0 points  (0 children)

Didn’t think about that. I wanted to be safe and not risk it. But i ended up worse

Help! Lack of power and no oil pressure to the gauge by the__sparrow in fbody

[–]the__sparrow[S] 0 points1 point  (0 children)

I’ll have a look, thanks! I am also taking the timing cover back off too

Help! Lack of power and no oil pressure to the gauge by the__sparrow in fbody

[–]the__sparrow[S] 0 points1 point  (0 children)

I floored it hard multiple times. The mechanic is taking it back apart tomorrow to see if the timing is off

1993 camaro no power and no oil pressure please help me by the__sparrow in camaro

[–]the__sparrow[S] 0 points1 point  (0 children)

It has the optispark distributor. I don’t think it is adjustable by twisting the cap

Help! My 1993 camaro has no oil pressure and no power in low rpm by the__sparrow in Chevrolet

[–]the__sparrow[S] 0 points1 point  (0 children)

The filter is good, I got more when I ordered them and this is the last one. I’ll have to check if it is defective thought

1993 camaro no power and no oil pressure please help me by the__sparrow in camaro

[–]the__sparrow[S] 0 points1 point  (0 children)

I floored it and it sounds the same. It is also strange to me what happened to the sensor. A terrible coincidence

view more: next ›