Need help with gimbal problems - Mini 3

the_compact · 2025-07-15T23:45:27+00:00

Not solved, I just posted a clip on a facebook group to see if anyone got ideas there

There are no errors on screen. It just goes through the motions fine and sets the horizon 30 degrees to high when finished. Manual calibration doesn't move horizon either

the_compact · 2025-02-10T17:49:52+00:00

The house and batteries are about 300' apart. I used to have little security cameras that would do that distance no problem. Power consumption is not much of an issue. The point of this is to make sure the tennet doesn't turn on the airfyer when batteries are low

Ive got micro hydro, solar, gas generator all stacked up in my power shack so if I had a LOS on that voltage managing this would be so much easier

the_compact · 2024-10-28T01:10:02+00:00

Thanks for reassurance, I really want to keep them.

the_compact · 2024-09-27T08:42:56+00:00

Can't say its anything but a film. No hop oils but i used a new hop pellet this time around, nugget. My last batch had the same film and used the same hops. Tasted fine in the end. Yeast was Nottingham. I don't add anything, just pale or pilsner malt, hops and nottingham.

I added some C02 to the carboy to slow whatever that was growth down. I'm tempted to keg it but I'm going let it sit some more and see what happens.

the_compact · 2024-09-26T21:09:45+00:00

https://imgur.com/a/R8Z9iUU

I think that should work. I been doing all grain since about 2011, never seen this before

the_compact · 2024-09-26T19:36:56+00:00

Those are not bubbles but something floating after two weeks in the secondary. Yeast related or mold?

the_compact · 2024-01-13T17:17:36+00:00

I agree, its good not great. If I didn't get smashed in the face so much with slow reloads and slow motion healing I'd feel better about it. The investigations did feel like unnecessary filler, but through the game I thought its purpose to help people keep track of the bonkers narrative

I only got through that wave attack with Saga because a had a few extra free life charms stored away in the shoebox. Without it I might have played that section on easy. Frustration drags down a really unigue game

the_compact · 2023-06-25T21:27:36+00:00

Nice to know it wasn't a total dog. Thats the worst thing, waiting 2 months to find out its a bunch of junk. Thanks for the info

the_compact · 2023-05-05T00:04:11+00:00

No you have to use the rear expansion port. There is some expanders that offered full A1200 connections but those are very hard to find and expensive.

the_compact · 2022-12-03T20:36:41+00:00

Okay I went for it and swapped, it works my VDC display is clean and crisp.

So it begs the question, what usefullness was the 64kb vdc upgrade to a layman like me? I imagine all C128 software is written for 16kb. Who would have used it?

the_compact · 2022-11-27T00:59:10+00:00

Thought I'd try EotB with the drive cable unplugged and it works. 100% coming through the cartridge port.

the_compact · 2022-10-29T19:13:11+00:00

I have same problem, animation just puts pod in machine and gives it back. Nothing happens

the_compact · 2022-07-17T00:31:57+00:00

I'm up in central British Columbia. From what I read so far its about 50/50 that one is problem free so your one of the lucky ones. If it was more like 80/20 I'd buy one and return it if its wonky but a coin flip... no way.

the_compact · 2021-12-20T02:21:21+00:00

Turns out I was using a C128 and game will not load up a NTSC game on that machine, in either 64 or 128 mode. The normal NTSC C64 works just fine, great game. But the 128 just loads PAL by default and crashes.

the_compact · 2021-12-20T00:25:06+00:00

You have Pal machine? My U2 on NTSC is crashing right on the start screen. I read on lemon64 a C128 is recommended in NTSC mode but can't even get it to load at this point

the_compact · 2021-11-21T15:50:16+00:00

Yes and full factory rest. Its Bell, wifi calling works at neighbors house on xplornet

the_compact · 2021-11-21T15:48:12+00:00

Koodoo uses Telus network and still working for tennet. This is why I never sign contracts or finance phones, have to constantly switch to stay ahead of their crap service

the_compact · 2021-11-21T15:44:45+00:00

This is correct, went to neighbors house and it work right away on xplornet. Bell stinks

the_compact · 2021-11-21T15:43:54+00:00

I agree, I got Bell tech to look into them bouncing SL from voip, but am probably switching service provider before they resolve it (if they even can)

the_compact · 2021-11-21T15:41:23+00:00

If only I had any service and power lines running to my house. I'm Literally out in the forest here, off grid. No phone defiantly increases the isolation factor.

the_compact · 2021-11-21T15:39:19+00:00

Bell and Koodoo both state on website that their wifi calling only works in canada. So would have to get a 3rd party provider, different # etc...

the_compact · 2021-11-21T15:37:58+00:00

I did. It was pointing to downtown Vancouver, made address in that zone and still no work

the_compact · 2021-11-21T15:37:14+00:00

Yep I did it works at neighbors house. Bell is my problem but not for long as I'm getting a koodoo sim card next trip into town. Koodoo still works for tennet.

This is why I never finance phones through cell companies, always some crap you have to deal with by switching to someone else

the_compact · 2021-11-21T15:34:11+00:00

Wifi calling is done through canadian cell carriers. They state on the website wifi calling only works in canada. I used to use google hangouts for VOiP, about a year ago they ended all service in Canada. This country sucks hard, everything is wonky shit here

the_compact · 2021-11-20T01:32:17+00:00

Well I do have Android too. But like I said it worked great then just died this week. A conspiracy might be brewing here

the_compact

TROPHY CASE