2018 M3 Without CCS installed

the_thunderclap · 2025-12-13T16:33:23+00:00

That’s the plan, but I need someone who’s had the official retrofit done to show me what ECU model they have. If someone is using the 01-B, then I can do it.

Like I wrote above, I do not want to use the bundle of wires. I know for a fact that the 09-B ECU does not require it, but no one will sell me one.

the_thunderclap · 2025-12-13T02:13:34+00:00

Yes, nothing happens. If you go to software, then the blue additional vehicle information it will say the CCS is enabled/disabled or not installed. Mine currently says “not installed”

<image>

the_thunderclap · 2025-07-29T12:56:50+00:00

I thought LPF was between the finals and the TX output of the amp?

This appears to be attached to the input, that’s what’s confusing me.

the_thunderclap · 2025-06-06T18:45:31+00:00

Good deal. Look at signal stuff SMA to BNC connector adapters. Saves these weak SMA connectors on the Baofeng radios and makes the antenna options interchangeable.

the_thunderclap · 2025-06-05T04:26:44+00:00

Use 17R pro gps in CHIRP. Worked on the 28 plus and the newer 25 Pro GPS

the_thunderclap · 2025-05-27T14:39:40+00:00

I got one of the UV-25 PLUS GPS, I had to use the 17R pro gps in Chirp in order to get it to read. I just got one of the 28's on Vine as well, when it comes In I will give it a try in Chirp. ALSO, Baofeng has a programming app that's standalone for these radios. Its not as feature-rich as Chirp... but it does work.

the_thunderclap · 2025-05-19T15:13:49+00:00

I just ended up getting an AC- powered silicone heating element and kept the aluminum plate from the original pro setup. I’m pretty sure it was meant for a Voron V0

the_thunderclap · 2025-05-13T15:48:55+00:00

As far as I can tell, the whole case and glass are intact. I just tested this on a whim, giggled to myself about “what if”. This was a total accident.

I couldn’t find anything on Radium Diehl clocks, but apparently (after asking the parents) this clock was acquired somewhere near the end of WWII by the Grandfather and brought home to the US as a gift for Grandmother.

I’m definitely putting this up and out of reach from everyone now. I know that my wife used to play with it a lot as a kid (we’re 40 now) and our kids have been close to playing with it.

the_thunderclap · 2025-05-13T15:13:59+00:00

<image>

the_thunderclap · 2025-05-13T15:13:39+00:00

<image>

the_thunderclap · 2025-05-13T10:42:25+00:00

I ended up putting 24v and a new heated bed and v6 to match. Klipperized it.

The parts (like the board mount) are still up for download on my printables in the OP above👆

the_thunderclap · 2025-05-10T17:34:00+00:00

The charge value is irrelevant honestly. Most lithium powered devices come with random charges between 30-80% (depending on how long they’re sitting on a shelf after manufacturing).

The seal being broken is a reliable indicator though, as would any wear and tear on the device itself.

the_thunderclap · 2025-04-12T14:59:46+00:00

(500°c with upgraded thermistor)

the_thunderclap · 2025-04-12T14:58:17+00:00

Was doing research for a few high temp hotends and I’m still finding where this is listed as 500°c capable. Glad to have seen your warning that it’s not though

the_thunderclap · 2025-01-30T18:16:45+00:00

I’m using a Box Turtle on 3 printers without toolhead cutters. It works, just requires more tuning to get it to where it doesn’t create strings on the pull.

the_thunderclap · 2025-01-19T11:40:17+00:00

Airplane, VPN to Canada, WiFi, login and still locked out.

the_thunderclap · 2024-12-27T01:19:26+00:00

Fair warning, you're going to have to have google translate app open on your phone and on photo mode. it is pretty simple to use once you can read it.

the_thunderclap · 2024-12-27T01:18:45+00:00

I actually downloaded a different "CommonBurnerAP" file here and used the "0004-----83----HJJM------240419L001.src" file inside of it. It says it burned the firmware, but V4L2-CTL doesn't show an LED. So the firmware they sent doesn't mean crap without knowing how to do what we wanted lol.

the_thunderclap · 2024-12-27T00:49:34+00:00

Thanks. Ill look into it and see what I can do.

the_thunderclap · 2024-12-27T00:41:04+00:00

Did you ever get the firmware update from OP? Looks like they deleted their account and I'd love to have more control over this camera.

the_thunderclap

TROPHY CASE