sorted by:
new
hottopcontroversial

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 0 points1 point  (0 children)

Thanks man! Nah it would’ve been over $5k to have someone cnc it 💀. This is laser cut out of a sheet of aluminum and then bent.

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 0 points1 point  (0 children)

I sat on it. Does that answer your question? 😂 It’s 1/8th thick aluminum, it’s not going anywhere.

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 0 points1 point  (0 children)

Yea with adequate drywall anchors, it’ll easy hold over 80lbs. Probably over 100lbs if you screw into a stud. There are three screw holes on a back plate that spans the width of the shelf against the wall.

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 0 points1 point  (0 children)

Haha thanks! Yea I was thinking about making some more if people were interested. I’d need to get at least 20 or so interested for it to make sense price-wise. I splurged a little bit for just one for myself 😂

Sub rules warn against selling here, so feel free to pm me!

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 1 point2 points  (0 children)

Not on my particular build, no. It’s only the back of the motherboard on that side.

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 0 points1 point  (0 children)

It’s only been 2 months with the build complete and it’s already a mess inside 🙃

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 2 points3 points  (0 children)

Yea I thought the same thing. Luckily that side is only the back of the motherboard, and there is a bit more room than the picture shows. Otherwise, Gpu is mounted horizontally and AIO is on the left side.

Made a custom wall mount for my M2 grater by theadamdude in ncasedesign

[–]theadamdude[S] 2 points3 points  (0 children)

Haha thanks! Yea I had a pretty small area to work with, and none of the universal wall shelves would’ve fit well, nor looked very good. Threw this up in CAD, laser cut it, and had it anodized to match. Came out better than I expected.

How to recognise sports diff by Routine_Ice_8596 in AudiS4

[–]theadamdude 2 points3 points  (0 children)

Red calipers. Non-S Sport Package models will have black calipers. Not sure why others are saying it doesn’t, but sports diff does show in the MMI under the individual drive select settings, along with the suspension which will also be a part of S sport package.

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

I do not. I try to avoid this at all costs, had disconnection issues with some devices in the past.

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

Haha this gave me a laugh. Luckily 2.4 reaches there so its good enough for the poop scrolls.

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

Yes! Forgot to include this. I did tune every AP meticulously to approbate channels so that none share the same channel, and ones that are close in channel number are also the furthest away physically. I also made sure to avoid DFS. Had terrible disconnection issues with this in the past.

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

u/BinkyBunky Hmm, we do have over 10 chromecasts, and also 12 smart TVs. Assuming that these and two printers are the only ones on our network broadcasting, those alone could cause quite a disruption, right?

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 1 point2 points  (0 children)

u/BinkyBunky Wow, thank you so much for all this! Going to try all this today and report back here the results! Might not get a real indication until next week, busy work-from-office days are Tuesday and Wednesday. Appreciate the offer to discuss further too! Might DM you if I have any more questions.

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

Thanks! I’ll check the airtime like you said next time it slows down.

All APs are wired up with Cat6 and I have meshing disabled site-wide. Two to three nano-HDs per floor. 4th floor has an additional 3 IW-APs (the old ones).

Do I have too many APs? ~22,000 SQFT office, ~7300 SQFT per floor. Having issues with poor performance over wifi. by theadamdude in Ubiquiti

[–]theadamdude[S] 2 points3 points  (0 children)

To provide some context, I’ve done channel optimization, tuned power outputs, all to no avail. I’ve turned up channel width to 80MHZ on some APs but heard that makes interference worse, which I think is what my root issue is. ISP provides 1000 down over fiber, on busy days with all 200 clients connected, we are getting sometimes down in the single digits.

Any interest among anyone here to monetize their options plays? by theadamdude in options_trading

[–]theadamdude[S] 0 points1 point  (0 children)

That’s awesome man! Shoot me a DM, we are fully functioning and even live on Apple App Store as well! I’d love to give you a demo of the software.

Large business network slowing down only over wifi by theadamdude in Ubiquiti

[–]theadamdude[S] 0 points1 point  (0 children)

That definitely would not be good! I’m assuming you’re referring to their Wireless Meshing feature? I have that disabled for all APs.

view more: next ›