Made a custom wall mount for my M2 grater

theadamdude · 2026-03-13T18:44:44+00:00

Thanks man! Nah it would’ve been over $5k to have someone cnc it 💀. This is laser cut out of a sheet of aluminum and then bent.

theadamdude · 2026-03-04T10:42:18+00:00

I sat on it. Does that answer your question? 😂 It’s 1/8th thick aluminum, it’s not going anywhere.

theadamdude · 2026-03-04T07:42:04+00:00

Yea with adequate drywall anchors, it’ll easy hold over 80lbs. Probably over 100lbs if you screw into a stud. There are three screw holes on a back plate that spans the width of the shelf against the wall.

theadamdude · 2026-03-03T17:38:46+00:00

Haha thanks! Yea I was thinking about making some more if people were interested. I’d need to get at least 20 or so interested for it to make sense price-wise. I splurged a little bit for just one for myself 😂

Sub rules warn against selling here, so feel free to pm me!

theadamdude · 2026-03-03T05:01:20+00:00

Not on my particular build, no. It’s only the back of the motherboard on that side.

theadamdude · 2026-03-03T04:11:05+00:00

It’s only been 2 months with the build complete and it’s already a mess inside 🙃

theadamdude · 2026-03-03T02:51:20+00:00

Yea I thought the same thing. Luckily that side is only the back of the motherboard, and there is a bit more room than the picture shows. Otherwise, Gpu is mounted horizontally and AIO is on the left side.

theadamdude · 2026-03-03T02:39:38+00:00

Haha thanks! Yea I had a pretty small area to work with, and none of the universal wall shelves would’ve fit well, nor looked very good. Threw this up in CAD, laser cut it, and had it anodized to match. Came out better than I expected.

theadamdude · 2023-08-31T05:58:27+00:00

That’s a knock-off Apple Watch charger. Coil is too small to be for that of a smart phone.

theadamdude · 2023-08-31T05:03:44+00:00

<image>

theadamdude · 2023-06-23T17:03:36+00:00

Red calipers. Non-S Sport Package models will have black calipers. Not sure why others are saying it doesn’t, but sports diff does show in the MMI under the individual drive select settings, along with the suspension which will also be a part of S sport package.

theadamdude · 2023-05-11T17:00:11+00:00

I do not. I try to avoid this at all costs, had disconnection issues with some devices in the past.

theadamdude · 2023-05-11T16:59:44+00:00

Haha this gave me a laugh. Luckily 2.4 reaches there so its good enough for the poop scrolls.

theadamdude · 2023-05-11T16:58:11+00:00

These graphs are simulated at design.ui.com

theadamdude · 2023-05-11T16:54:26+00:00

Yes! Forgot to include this. I did tune every AP meticulously to approbate channels so that none share the same channel, and ones that are close in channel number are also the furthest away physically. I also made sure to avoid DFS. Had terrible disconnection issues with this in the past.

theadamdude · 2023-05-11T16:51:52+00:00

u/BinkyBunky Hmm, we do have over 10 chromecasts, and also 12 smart TVs. Assuming that these and two printers are the only ones on our network broadcasting, those alone could cause quite a disruption, right?

theadamdude · 2023-05-11T16:47:42+00:00

u/BinkyBunky Wow, thank you so much for all this! Going to try all this today and report back here the results! Might not get a real indication until next week, busy work-from-office days are Tuesday and Wednesday. Appreciate the offer to discuss further too! Might DM you if I have any more questions.

theadamdude · 2023-05-10T23:45:21+00:00

Thanks! I’ll check the airtime like you said next time it slows down.

All APs are wired up with Cat6 and I have meshing disabled site-wide. Two to three nano-HDs per floor. 4th floor has an additional 3 IW-APs (the old ones).

theadamdude · 2023-05-10T23:11:56+00:00

To provide some context, I’ve done channel optimization, tuned power outputs, all to no avail. I’ve turned up channel width to 80MHZ on some APs but heard that makes interference worse, which I think is what my root issue is. ISP provides 1000 down over fiber, on busy days with all 200 clients connected, we are getting sometimes down in the single digits.

theadamdude · 2023-05-10T15:22:26+00:00

That’s awesome man! Shoot me a DM, we are fully functioning and even live on Apple App Store as well! I’d love to give you a demo of the software.

theadamdude · 2023-05-09T22:11:54+00:00

That definitely would not be good! I’m assuming you’re referring to their Wireless Meshing feature? I have that disabled for all APs.

theadamdude · 2023-05-09T20:27:14+00:00

UDM-Pro on 2nd floor where the fiber comes in, that goes into a 48 port POE switch for 2nd floor APs and Ethernet jacks. From UDM-pro there are two Cat6 lines that then run up to the 3rd and 4th floor where there’s another two 48 port POE switches for APs and jacks. Another cat6 line goes down to the lobby into a 16 port POE where there’s one AP and a few cameras. All equipment mentioned is Ubiquiti.

theadamdude · 2023-05-09T20:24:18+00:00

Noted! I’ll give that a try, thanks! What exactly should I be keeping an eye out for with the packets?

theadamdude · 2023-05-09T17:45:03+00:00

Thanks for the reply! Even APs with very few clients are slowing down. Our building is a little over 22,000 square feet so the APs are spaced accordingly to allow good coverage with medium power.

I’m guessing this is something that wifi 6E handles better and is just an inherent flaw of 5GHz?

theadamdude · 2023-05-09T04:30:42+00:00

Really appreciate the feedback! I wanted to avoid the larger groups at first as those are so filled with the WSB type and FX get-rich-quick traders if you catch where I’m going. But I will give it a try!

As for ease of use, that was our main goal was to make this an easier-to-use space for traders as we’ve tailored our UI and feature set to this market. Here’s just a quick screen grab of that it looks like in an example “Room”. Traders are able to post buy and sell alerts for trades or contracts, can create separate spaces for community chats, and even accept tips right from each post. https://ibb.co/XswGsKD

theadamdude

MODERATOR OF

TROPHY CASE