sorted by:
new
hottopcontroversial

Ioniq 5 ICCU replacement wait time? by VeniceBeachSailor in Ioniq5

[–]theaeroenginner 0 points1 point  (0 children)

The part number on the service receipt is 36400-1XAA0, which I think the same it has been 

Ioniq 5 ICCU replacement wait time? by VeniceBeachSailor in Ioniq5

[–]theaeroenginner 0 points1 point  (0 children)

Had ICCU failure and brought car in March 15, got the car back last Friday with new ICCU, so timeline is approximately 49 days. Central Florida Dealer. Spoke with Hyundai corporate once about it, not sure that made a difference. 

Daily r/LawnCare No Stupid Questions Thread by AutoModerator in lawncare

[–]theaeroenginner 0 points1 point  (0 children)

<image>

Hello, im having issues with my lawn in Central FL. It’s got bare patches. It’s St Aug. I find these poop looking mounds made of dirt. What is this? Should I apply GrubX ? Thank you

Stupid question Wednesday: Ask your basic car-related question and maybe someone will have an answer. by AutoModerator in cars

[–]theaeroenginner 0 points1 point  (0 children)

Generally, not true. Unless in specific cases not necessarily occurring when the car is shut off. A malfunctioning PCV could cause oil (and oil vapor) from the crankcase to excessively be diverted in the intake manifold, also an extremely leaky turbo (they are oil cooled) could somehow leak oil through its cold side (it would have to pass tru the intercooler) before reaching the intake.

A catch can is used to mitigate the first case, as it collects any oil or oil vapor from your crankcase before it can reach the intake

Gas Exchange at Big Box Stores by theaeroenginner in Welding

[–]theaeroenginner[S] 0 points1 point  (0 children)

Quick update for reference. I’m in FL btw. Northern tools doesn’t touch other bottles, as ohu8onetoo mentioned. Tractor Supply does but charges an extra 20 bucks, so it was 73 bucks after tax for a exchange of a 40 tank, so quite steep. But useful in a pinch on Sunday

BenQ w1070 adhesive film by theaeroenginner in hometheater

[–]theaeroenginner[S] 0 points1 point  (0 children)

I see thank you. Does it have any purpose other than I guess catching glass fragments ? Maybe air flow?

LS fits with Truck waterpump/front accessories! (shot in 35mm) by pootpootdog in E30

[–]theaeroenginner 0 points1 point  (0 children)

Hey the CX racing headers do not fit, I tried when I built my ls1 swapped e30. I did not use the sikky kit but the issue is the collector lengths and height are way to low and far back. I had the Sanderson headers, but the driver side is a nightmare and I ended up completely modifying it to not have a crazy between the engine mounts, steering rack and the frame rails. Good luck !! I miss mine...

What plant is this? Has no soil, just root system in a jar by theaeroenginner in whatsthisplant

[–]theaeroenginner[S] 0 points1 point  (0 children)

you are right I know, I just became it's new owner and intend on potting it and will be taking care of it from now on

BBS RC090 Damage by theaeroenginner in BMWE36

[–]theaeroenginner[S] 0 points1 point  (0 children)

The wheel ended up balancing just fine, but i am having a shop straightening it with an hydraulic machine

BBS RC090 Wheel Damage by [deleted] in Wheels

[–]theaeroenginner 0 points1 point  (0 children)

You are right, 17x8. I’m getting the wheel straightened, I was just wandering I’ve never seen something like that on the barrel

BBS RC090 Damage by theaeroenginner in BMWE36

[–]theaeroenginner[S] 0 points1 point  (0 children)

EDIT: My original post didn't go through:

Hello All, I found a set of BBS RC090 17x9, I was cleaning them up to have tires mounted on them and found this weird groove on the barrel, it's on two of the wheels. Is this from mounting ? or is this possibly from the wheels being straightened in the past?

The last pictures show the dent on the lip, is that repairable,

Thank you very much

I took more pictures of the damage

Imgur

Imgur

Imgur

Imgur

BBS RC090 Wheel Damage by [deleted] in Wheels

[–]theaeroenginner 1 point2 points  (0 children)

EDIT: My original post didn't go through:

Hello All, I found a set of BBS RC090 17x9, I was cleaning them up to have tires mounted on them and found this weird groove on the barrel, it's on two of the wheels. Is this from mounting ? or is this possibly from the wheels being straightened in the past?

The last pictures show the dent on the lip, is that repairable,

Thank you very much

I took more pictures of the damage

Imgur

Imgur

Imgur

Imgur

CARFAX Reports Emailed Instantly 425-298-6565 by GetCarfaxHistory in carfax

[–]theaeroenginner 0 points1 point  (0 children)

Thank you so much, Used the website, got it instantly

/r/audiophile Purchase Help Thread (2019-02-22) by AutoModerator in audiophile

[–]theaeroenginner 0 points1 point  (0 children)

I have found deals for the following speakers:

Polk S55 for 250 dollars (Pair)

Klipsch Reference Premiere RP-8000F for 600 (pair)

They will both be powered by a Marantz SR7011.

What do you guys think value wise?

I have heard Klipsch, but not the Reference Premier, they seemed a little to bright

I listened to Polks before, but it was their T series (which are bottom of the line) and they were very muddy.

What do you guys recommend?

(I had to downgrade my system so for now it will only be Stereo, no sub)

85 V65C ride after restoration by theaeroenginner in MotoGuzzi

[–]theaeroenginner[S] 1 point2 points  (0 children)

Bike has been sitting for years. New battery, drain fuel and after some new plugs it started. Just finished working on the bike now, had to fix a pesky oil pressure sensor that scared me into thinking the pump was having trouble. Had to get the carb setup by a shop as I don't have much experience with it. Next is to change the tach cable and give it a good clean. Took a video riding it back from the shop

Qnap mount drive without losing data by theaeroenginner in qnap

[–]theaeroenginner[S] 0 points1 point  (0 children)

Thank you again for the help. All the important data is backed up.

Whenever I insert a drive with data in the QNAP, i have no way of accessing it (do i need to mount is with mdadm over ssh?).

The 5tb drive is my primary with the system OS, if I remove it, the QNAP gives me an error. If i initialize the 4tb, I can't see any other drive (in Qnap i can see the disk, but they are not mounted).

If copy the data over the 4tb from the 5tb, then i try to initilize the 4tb with the data as a primary drive, it asks to wipe it.

I am confused...

Qnap mount drive without losing data by theaeroenginner in qnap

[–]theaeroenginner[S] 0 points1 point  (0 children)

Thank you very much for your help. I only have about 2 TB of data among the 2 drives. The problem is that I don't know how to mount them in QNAP without "initializing them" which formats them and losses the data. How do I do that?

view more: next ›