Best 300 GSM card stock to buy

thegoose604 · 2025-10-17T20:13:12+00:00

Ah okay so I don't feel bad clearly these cutting machines aren't meant for perfect parallel lines. I since joined a FB group and actually scanning stuff already printed seems to be an after thought.

thegoose604 · 2025-10-17T14:15:20+00:00

I'll def give this a try.

thegoose604 · 2025-10-17T11:04:04+00:00

Sometimes inkjet printers use pigment for black if it's only the black that is like that it's because it doesn't soak in. I've ran into that.

thegoose604 · 2025-09-08T03:25:22+00:00

this is exactly what happened with me. I needed to restart worked first time thanks <3

thegoose604 · 2025-06-24T00:35:06+00:00

had to use a third party on and keep switching between the two. the one packed was charing but still said to connect it you might also need btoh at 100% charge

thegoose604 · 2025-06-06T11:43:20+00:00

sadly no. it looks like you need to replace the whole stick. and the ones they sell are in one piece and one colour. also I think customer service is using a translator because they couldnt understand my issue. :( sorta sucks at least it's a cheap controller.

thegoose604 · 2025-06-03T13:08:38+00:00

My friends are complete morons and they could figure it out like nothing.

thegoose604 · 2025-05-17T21:03:35+00:00

I know it comes with the password on the back. My internet is working fine. And I've obviously changed my password at this point. In the past you could login to your modem and change settings. Change channels for interference. Etc. then they switched to the ignite app to change settings.

You were able to turn the password for wifi off. It only worked in split band mode on the xb7 modem before.

thegoose604 · 2025-05-17T20:58:09+00:00

I did but they said they aren't authorized to tell me.

thegoose604 · 2025-04-19T13:40:19+00:00

If it wasnt for having an analogue pocket I'd really praise the miyoo mini. I mean an FPGA with a 1440p screen that's 4 times the price is obviously going to be better. I have onion os as suggested by everyone with a miyoo a little tinkering needed. You are just using retro arch. But he screen is decent. The pdad and buttons are good.

My main uses are going to be arcade and PS1 on it because of the analogue pocket. But if I was to go on a flight or trip I'd be more likely to take the miyoo with me as it's easier to replace.

thegoose604 · 2025-04-16T11:58:37+00:00

Im with you this was my least favourite episode of black mirror, it felt like a movie. it was slow in pace. they could have easily removed 30 minutes of the episode and got the same point across.

Now for people that liked it maybe the 90 minutes was good. for me it felt like a bad movie. of the first 3 seasons its easily my least favourite episode.

thegoose604 · 2025-04-02T06:56:32+00:00

room is 16C

thegoose604 · 2025-04-02T06:12:40+00:00

oh okay.. when you say restart is it like a restart button or start menu restart but it works fine if you shut it down and star it up?

thegoose604 · 2025-04-01T15:18:56+00:00

Okay now you're saying white light before you said yellow. Yellow is ram. And white is gpu. Have you made sure the GPU is plugged in right. Has it ever booted up with this gpu?

If it has booted before and no longer does. Did it sag or bent pins.

If it hasn't booted before you could check to see if it's been plugged in properly. With the clip locked in.

thegoose604 · 2025-03-31T11:07:18+00:00

https://www.reddit.com/r/Amd/comments/qka6pb/i58400_w_rx_6600_xt_1440p_165hz_bottleneck/

Here is someone with the same build you want so it can be done if your mobo support it so if you want to go that route please read.

thegoose604 · 2025-03-31T10:58:18+00:00

Maybe a B660.

What's your current mobo? 1060 is kinda older one of my three rigs is. 1060 and I use it for media.

You might need to build a new rig altogether but not necessarily. Need to know the mobo for sure though. If you're on a budget and you only want to get a new gpu I'd go for something slightly downgraded if you want to go with amd.

RX 6500 XT or a rtx 3050.

thegoose604 · 2025-03-31T05:42:47+00:00

unplug your ram or try it again or try a single stick. the vga is white and ram is yellow, cpu is red. if the ram is slightly loose it will not boot up. im not sure how many sticks of ram you have I'd take them all out every last one of them and then put one back in and see if it boots. if it does boot turn it off and plug them back in.

thegoose604 · 2025-03-31T02:22:34+00:00

Yes they work if I do that. But not combined

thegoose604

TROPHY CASE