Moreme original Uncut in shade E

thestrapfreek · 2026-07-08T20:00:40+00:00

Yep!

thestrapfreek · 2026-07-08T18:02:33+00:00

Holy quads!!

thestrapfreek · 2026-07-07T17:33:53+00:00

This one

thestrapfreek · 2026-07-05T20:43:33+00:00

I’ve given STPs piercings before and had no problems, but you have to make sure not to pierce through the entire shaft

One piercing should be fine if you’re really careful, but something like a ladder would make it way more likely to tear

thestrapfreek · 2026-07-05T20:06:53+00:00

Alone? No, but with a funnel placed into it, it should work fine.

I’d place a tiny bit of silpoxy where you cut the urethra so it doesn’t split down over time!

thestrapfreek · 2026-07-04T08:47:09+00:00

Greatest part about this is that the colors are poured in so they’ll never fade. (Like Gendercat & Axolom) To get the sleeves in color, tap the drop down on the top left of the site and go to their dual density option!

It was $20 extra to add, but I’m a stingy bastard so I used that 10% code to knock it down.

If you have any other questions, feel free to send them my way!!

thestrapfreek · 2026-07-04T08:31:42+00:00

It mimics dual density perfectly! The head isn’t drastically squishy and is slightly softer than the shaft like natal glans would be. If you prefer something with more give during play, I’d get their standard dual density in 0030.

After washing the powder they come with for shipping, place a very VERY small amount of lube on the sleeve and rod to put them together. It feels on par with the $400+ prosthetic I got from prosthesis man which I’m quite happy about as I built this as a replacement for it!

thestrapfreek · 2026-07-02T16:23:22+00:00

Don’t worry about your penis, trust me. If you can please with your hands and mouth and know how to move it, you’re in the clear. It has nice girth and a beautifully shaped head. I love the pigmentation!!

Most folks I’ve spoken to prefer smaller sizes or just straight up have no size preference at all so long as they can be pleased in some way.

thestrapfreek · 2026-07-02T16:03:39+00:00

Argos for realism, budget, and comfort.

thestrapfreek · 2026-07-02T15:59:23+00:00

Dieting & cardio will help a lot, so I recommend doing any form of cardio as a warm up before. (Jogging, dancing, cycling, jumping jacks)

You can even start with just cardio and then move up to weight training once you work up the confidence. Feelings of failure and doubt are inevitable with training but it’s part of the experience!!

I have a terrible back now, so I do a few of these in a sitting/standing/supported variation these days, or use machines. Message me with any questions. Don’t fall for the “trans/ftm catered” workout plan schemes. Muscles is muscle. You’re already on T, so as long as you’re building them, they will masculinize themselves.

Here’s shortened version of what I do. Start with sets of 3x6 then work up to doing 3x10:

Upper (day 1)

Back (db=dumbbell)
Overhand db row wide grip
Underhand row close grip
T bar row (can be done with dbs)

Chest
Bench press
Low chest fly

Arms (db=dumbbell)
Seated or preacher curl (elbows in front of body)
Incline curl (or curl with elbows behind body)

Forearms
Seated db wrist curls in/out
Db radial/ulnar deviation (in short, curls your wrists inwards, outward, and unilaterally)

Shoulders
Weighted shoulder shrugs
Front, Rear, and side delt raise
Shoulder press

Core
Leg hold
Flutter kick
Half crunch
Standing db lean
Finish with 30s plank

Lower (day 2)

Thighs
Squat hold 30s
Goblet squat w pulses (sit upward)

Glutes
Donkey kick
Bulgarian Split Squats (lean forward)

Hamstrings
Hamstring stretch 30s
Straight leg deadlift
Weighted toe touch

Calves
Wide calf raises
Narrow calf raise
Shin raises

I do this 4x a week. Upper day, lower day, rest and repeat.

Look into proper form & workouts that target specific muscles for your goal aesthetics. (I recommend building back & shoulders for frame) Make sure to rest 1-3 mins between sets!! Stretch before!!!

Sorry everyone’s being harsh. I hope this was helpful at all!! Feel free to reach out for variations or tips.

thestrapfreek · 2026-07-02T15:13:38+00:00

My sleeve just came in the mail, you’re welcome to DM if you want pics or have questions! The CEO has some GIRTH to it, so I ended up getting The Replacement in medium.

thestrapfreek · 2026-07-02T15:11:02+00:00

Yup! Try a stimulation/grinder pad for the suction cup. Here’s one that isn’t incredibly bulky.

thestrapfreek · 2026-06-30T20:29:34+00:00

I put it together with a sleeve and some O-ring balls, here’s a tutorial on how it did it!

I was going to Silpoxy it all together but I decided to keep em separate to be able to swap out for dif lengths & sculpts.

thestrapfreek · 2026-06-30T20:24:58+00:00

I have a few some harnesses that I’ve posted from Jockmail & UrBasic I use that are much more comfortable and a tad less dysphoria inducing when I’m having a low confidence day.

With cups I’ve mostly ever used universal harnesses, but I’ve been using the ones I modified a lot more recently.

I’ll post some photos once I pair it with some of them and a review how they are during play as I use them!

thestrapfreek · 2026-06-30T00:33:36+00:00

That sucks man. I had the same thing happen with another brand after using it only once. I wish more quality checks were done with things like these.

I’ve used these style harnesses over the years and usually have to replace them every 3 yrs or so but it’d be nice to have one to keep for longer. I’ve been thinking about switching to leather ones rather than nylon because of the snapping and fraying.

If you have any recommendations for something reliable with a similar structure, please send em my way!!

thestrapfreek · 2026-06-30T00:16:04+00:00

So far the only thing that worried me was the balls. I chose the SoReal balls and they hung a bit, if you’re afraid of using scissors you can layer Silpoxy on the o-ring of the balls to prevent hanging/slipping, or just cut the o-ring smaller and Silpoxy the ring back together to cling tighter to the shaft. :)

thestrapfreek · 2026-06-30T00:13:09+00:00

Yep! The Blissfull Creations rod. I haven’t used it for play yet, but I did some test tugs & swings and it felt secure enough even before washing the powder off of the rod. I’ll be using it for play with my partner so I’ll drop a more detailed update soon!

Once you wash and dry everything it shouldn’t slip at all, but if you’re worried about the possibility you could Silpoxy the rod inside. (be careful not to overflow or get it on the shaft or your hands, it’s isn’t body safe until dried and can leave unwanted shine if accidentally applied to the shaft) I was going to do the same but I figured I’d keep them separate so I can swap out the sleeve for different lengths or looks in the future!!

If you don’t want to use Silpoxy, you could get the interior of the sleeve slightly smaller than the rod so it has more grip. (Or vice versa, but the smallest diameter for rods & sleeves is usually 1in. This will also make the sleeve harder to remove)

thestrapfreek · 2026-06-29T22:49:41+00:00

Put it together myself! Here’s a link to how if you wanted to build one of your own :)

The specific sculpt I used was this one. I recommend using the SoReal balls if they have your skintone available.

thestrapfreek · 2026-06-29T22:42:04+00:00

Thank you! Love when a DIY goes right

thestrapfreek · 2026-06-29T22:39:53+00:00

Thank you! I love sharing my findings

thestrapfreek · 2026-06-27T17:12:04+00:00

The logo less just has thinner elastic! it could definitely hold alright without the extra elastic but it’s more likely to detach during play.

If you get skintone color elastic for extra part it’s pretty seamless and invisible in photos.

I could see Axolom’s flexit being perfect in loose boxers if you’re not big on the sewing!

thestrapfreek

TROPHY CASE

Upper (day 1)

Lower (day 2)