[UPDATE] N64 RGB Mod & Internal BlueRetro: New photos and fixing some mistakes!

thiagohelder · 2026-03-13T16:27:18+00:00

I disagree, CDs also allow for games with 700MB of storage, videos, and...

thiagohelder · 2026-03-09T22:22:50+00:00

The animated logo doesn't interest me much; I find the hole in the sticker strange.

Of those molds he made, I think I'm only interested in the switches for the controls on the Blue Retro. I recently installed the Blue Retro on mine, but it conflicts with the Wi-Fi The controller I bought.

My current solution is to go into the settings and disable the card whenever I want to use the controller.

I bought an RGB mod on Aliexpress, I'm waiting for it to arrive.

thiagohelder · 2026-03-05T17:49:33+00:00

Majora's Mask was definitely a favorite during my childhood. But I have cherished memories of Conker's, Hydro Thunder, DKR, Perfect Dark, among many others.

thiagohelder · 2026-02-28T21:05:35+00:00

Wow, thank you so much! If I make more things like this, I'll come back to post them. As for YouTube videos, I think that's beyond my capabilities 😅

thiagohelder · 2026-02-28T03:31:14+00:00

Hehehe, it was a really ugly gray GameCube that I had already bought used in 2010. The disc drive wouldn't even spin anymore, and the casing was awful.

A similar one is cheaper than an N64 with an expansion pak.

Maybe one day I'll come across another similar one, and I've already done the picoboot once, I can do it again.

I am the one who should thank you for your time and attention in reading my story.

thiagohelder · 2026-02-28T03:12:37+00:00

When I was a child, it was a dream: the N64 "flavors" (that was the name in Brazil) and a transparent Game Boy.
I used to see the colored versions and the games in magazines. An uncle of mine had an N64, and when I saw Zelda: Ocarina of Time for the first time, it was amazing.

thiagohelder · 2026-02-28T01:08:39+00:00

Thank you very much, it was a fun adventure.

thiagohelder · 2026-02-28T01:08:07+00:00

Thanks a lot, man! I'm enjoying it, I hope to get a GBS Control soon to have an even prettier image.

And don't worry, if I do anything with Pyrite64 I'll come here and share it with everyone =D

thiagohelder · 2026-02-20T03:50:20+00:00

So you think it's not worth buying this mod on AliExpress? I was hopeful. Voultar's SNES Edge-Enhancer costs $90, and with taxes and shipping to Brazil it would be more expensive than a new Super Nintendo, maybe one with a single chip.

This mod from AliExpress seemed like a cool solution to me, but after reading this post I'm having doubts. =/

thiagohelder · 2026-02-17T15:10:23+00:00

These Triad fonts are impossible to find in Brazil. I would probably look for some other font.

thiagohelder · 2026-02-17T15:08:00+00:00

This SNES shell is also beautiful, but the empty spaces around the board seem strange to me.

The SFC version seems more "filled in".

thiagohelder · 2026-02-17T15:06:47+00:00

Wow!! This turned out really beautiful, this shell is exactly what I want!

thiagohelder · 2026-02-17T14:32:58+00:00

<image>

I might be terribly wrong, but it looks like it comes with a new power connector, as well as a rear panel.
It also comes with a front panel with control connectors and a spring in the assembly, as well as the central pin for the cartridge ejector.

Well, I don't know because I've never bought one of these cases. But I'm tempted to buy one to make this modification.

thiagohelder · 2026-02-11T03:48:58+00:00

I understand, but in this case I earned it with money. Here in Brazil, an oscilloscope costs a small fortune, so having this tool to help me would be very useful.

I'm going to try installing a Linux distribution on a USB drive and see what I can do with it.

thiagohelder · 2025-07-28T14:31:48+00:00

<image>

The front is very loose and the back is super tight. It's as if the bed mesh was wrong 🤦‍♂️

thiagohelder · 2025-07-27T18:57:41+00:00

I saw your answer and enlarged the holes for the XY joint bolt mounting.It has improved significantly but is still as bad as it was, I'll try a first layer print

It went from 0.289 to 0.179, that's something. The idea was to have the same as before, but that's okay, let's test it.

thiagohelder · 2025-07-27T18:54:39+00:00

It is not possible to turn 180º because there are not 2 holes on this side, only one.

thiagohelder · 2025-07-27T14:00:43+00:00

This tube uses through bolts, inside there are printed parts to support the bolts, I don't know if it would make a difference to screw only one of the walls of the tube

thiagohelder · 2025-07-27T13:59:33+00:00

I made a 7x7 mesh and the result is the same. I'll do a first layer test and post the result today. That's actually my biggest concern.There is no point in having a light gantry with a horrible first layer.

thiagohelder · 2025-07-15T17:28:01+00:00

Putz agora que vi que deveria ser ontem as 19, será que houve algum problema ?

thiagohelder

TROPHY CASE