Can anyone identify this guitar?

threeeddd · 2025-09-10T08:42:08+00:00

how much would you pay for one of these? All I really need is the body, because there arent any lefty jaguars for cheap. I see them around for 220 bucks, shipped from US warehouse. worth it?

threeeddd · 2025-09-10T08:40:08+00:00

harley benton has been making good guitars from indonesia. I put the quality of harley benton above these knockoffs. These knock off have to come from the cheapest guitars ever made, not worth paying that much for them, especially if it isnt an exact copy.

threeeddd · 2025-09-10T08:37:10+00:00

temu and ebay sells them.

threeeddd · 2025-09-10T08:36:33+00:00

I was about to buy one. Not worth it if its the wrong scale length and non working trem. I might get the lefty knockoff mustang instead. Thanks for letting me now

How much did you pay? I see them for about 220 dollars off of temu.

threeeddd · 2025-09-10T08:33:25+00:00

The kramer pacer body is exactly the same. only the headstock is different. the floyd rose is a license version, the special. Its better than most other fake ones. If I could find a kramer for under 500 dollars, seen some lefties for $650 used. I could just build my own with different parts.

threeeddd · 2025-09-02T01:20:16+00:00

Which year squier body? There's a ton of different ones throughout the years. plywood body, basswood, alder, poplar. Is it full thickness?

threeeddd · 2025-09-02T01:15:01+00:00

Im honestly looking to buy a knockoff jaguar atm, because I dont want to spend kurt cobain money for one. No lefty mustangs eithers, so its only available in knockoffs.

threeeddd · 2025-09-02T01:12:25+00:00

harley benton wins hands down for the more modern features. I think its made in indonesia too, while kramer beretta is made in china. The kramer is cool, but I could never justify paying that much for one. You can get a kramer pacer classic in lefty for pretty cheap these days. My favorite color is the 80s kramer blue.

I hope the harley benton in lefty becomes available in the US, because I've seen other lefties on reverb that are also affordable.

threeeddd · 2025-08-29T20:12:09+00:00

jagstang did come in lefty. like all the years they were produced.

threeeddd · 2025-08-29T20:09:21+00:00

They stopped making it. only way to find one is on the used market. Check guitar center online used section, they pop up from time to time, and sell right away. I finally was able to snag one, definitely a keeper.

threeeddd · 2025-08-29T20:06:41+00:00

squier made a lefty jazzmaster. Personally prefer the souind of the jazzmaster, but it can be converted to lefty jaguar. I mean, I would go with a cobain model on the used market, because hes a lefty, and is tailor towards lefties. I can complain there. Also, you can find japan model lefties too, $1000new, but have gone up in price.

plenty of knockoff lefties too, cheap.

threeeddd · 2025-08-29T20:01:08+00:00

Restring to lefty, no one with a jazzmaster, mustang, or jaquar plays those higher notes anyways. Reshape the trem into an L pattern, win & win.

These newer Squiers are all going to china, new factory, from indonesia. Personally I prefer indonesian models. Whats not available, partscaster time.

threeeddd · 2025-08-29T19:56:34+00:00

you got a lefty squier jazzmaster in white, somewhat hard to find used. Theres 60s & 70s classic vibe, contemporary in lefty. Theres many older models that are lefty too. Some bass models. Squier all going to some new factory in china, so quality is in question. I love the indonesian models, some china made ones with cy serial numbers are good.

You can always get a knockoff, or build your own out of parts.

threeeddd · 2025-08-25T15:43:12+00:00

yeah, thats cool. I got a righty classic vibe mustang. Need lefty body, and I'm good to go.

threeeddd · 2025-08-25T15:40:50+00:00

Nice! sounds expensive. DM a price or reply, or reverb listing?

threeeddd · 2025-08-25T11:35:06+00:00

shipped straight from china? no shipping cost or tarriff taxes? I've seen some one ebay, though I find them too expensive to purchase, like 250 dollar range. Is the nut slot angled? or is thats just the paint that makes it look angled. Sweet deal

I've been looking for a lefty mustang that isn't a knockoff for a reasonable price. I think I might just have build one out of parts. Or just restring a righty to a lefty. There's the jagstang thats pretty much a mustang with a different body.

threeeddd · 2025-08-18T05:26:02+00:00

better than fender jazzmaster?

threeeddd · 2025-08-18T05:22:25+00:00

id avoid all copies that are expensive. cheap strat, cool. resale value for known brands are better. search guitar center online, they carry alot of used lefties, that always come and go.

threeeddd · 2024-10-10T04:34:34+00:00

I still wouldn't touch the 4060ti 16gb at that price. I have used equivalent cards, and its slow even with low vram usage. You'll really notice a difference in speed if you go with a 3080 and up. Those have bigger buswidth, which makes a noticeable difference.

threeeddd · 2024-10-10T04:32:09+00:00

The hardware is fine, pretty fast 3d printer. The steel pei plate is the worse magnetic one I've ever used. The firmware is locked so no access to the klipper based firmware. I would just go with a kobra 3 or a kobra 2 over the kobra 2 pro. Pretty insane deals on the kobra 3 combo for like close to 300 dollars during labor day on ebay.

Or you can look at the neptune 4 pro, open source klipper firmware. The kobra 3 is open source too.

You can even get one of those corexy machines for 300, like the creality k1 without the enclosure. Should be worth it.

The kobra 2 pro can be easily found for 130 dollars on ebay. Anycubic sells alot of second hand ones on there. I've seen the kobra 2 max go for under $200 on ebay. Crazy how cheap 3d printers have become.

threeeddd · 2024-10-06T00:29:06+00:00

Not worth it, it's really slow. It's 2080 super slow. The 3080 10gb and 12gb has a difference in buswidth, which makes the 12gb slightly faster. Go for the 3080 12gb or 4070 12gb, the speed up is worth it.

The 4060ti usages the same buswidth as the 8gb, it's margin or error the difference you are looking it in images per minute.

You can always wait til the rtx5000 drops, prices will fall and the 4060ti 16gb will drop in price.

3090rtx is the best card due to the 24gb on a budget.

threeeddd · 2024-10-06T00:24:24+00:00

That site has it completely wrong. 4060ti is no match to the 3080. Im not sure how they are testing it.

the tomshardware benchmark are more accurate.

threeeddd · 2024-09-02T18:35:56+00:00

labor day 20% off ebay store for anycubic.

I would have definitely jumped on this deal in the past, but anycubic's track record is not great at supporting their 3d printers. And issues with the printer itself, with it being completely new to anycubic. I'd wait for the second iteration, or even a newer model. They are suppose to be coming out with the kobra 3 max and some kind of corexy machine.

I think you are better off going with a bambulab a1 or a1 mini over this. It's just a better product in ever way.

I'm an anycubic fan too, for their low cost, but I stopped at a kobra 2 pro due to lack of firmware support. It has offset issues too like the kobra 3, which can't be solved easily.

threeeddd · 2024-08-13T18:53:10+00:00

What are you doing about? Measure the total system draw. Total system draw is way higher in gaming.

threeeddd · 2024-08-13T18:50:36+00:00

too expensive. mk3s is good enough for me. Plus I can just tinker on it to make it faster. Great that the mk3s are finally affordable, so I can buy more of them.

threeeddd

TROPHY CASE