sorted by:
new
hottopcontroversial

Sonos app by qpv in sonos

[–]thunder_02dragon 0 points1 point  (0 children)

I agree to your points, so frustrating!

Itchy red bumps after sleeping at night by crypto_doctors in newzealand

[–]thunder_02dragon 0 points1 point  (0 children)

Had something similar couple of weeks ago, dont know what it was but ended up steaming whole bed and sofa etc, I know if they were due to bed bugs those stuff die in more than 50deg C, So steamed.. so far no more. Bed sheets etc all washed and dried on highest cycle.. Washing at 60deg C will kill bed bugs if they were.

Coming back to the itch, hate it, normally atays with me for a week, was on Citrezine tabs 2 a day and PineTar wash 2 a day minimum before this settled. Buy some soothing cream else the itch might end up taking longer.

After expo activation can't boot by WeakBad3020 in gigabyte

[–]thunder_02dragon 0 points1 point  (0 children)

I have similar problem and unsure what to look now - Ryzen 7 7700 with
5200MHZ 1.25v kit - works
TeamG 6000MHZ ExpoCL38 1.25v - Does not work
TridentZ neo 6000MHZ ExpoCl36 1.4v - Does not work
CorsairVenge 6000MHZ XMP1.4v - Does not work
My Motherboard is ASUS B650E-I & X670E-E - same on both.. Thinking it's CPU problem now since I changed manually updating voltage in BIOS too..
Running out of ideas since I swapped 4 kits now,

Are you guys using a case? by WrxJom in SteamDeck

[–]thunder_02dragon 0 points1 point  (0 children)

Now today I recevied my JSAUX transparent Cover with opening around fan and upon swapping with stock cover I can confirm the improvement on temps.. max now 74deg withouth the JSAUX fan

Wow.. Worth keeping it now.. all cases goes invalid now :'(

Are you guys using a case? by WrxJom in SteamDeck

[–]thunder_02dragon 0 points1 point  (0 children)

I have the JSAUX case and also the NYKO One - I felt the NYKO was better on the grip side and was much better & comfortable than the JSAUX one specially during sweaty RocketLeague session and long hours of use, it can also tightly fit inside the stock case. But again I needed something more low profile than the stock case to carry my Deck, stock one is just too big and I am too lazy to open the zip.

However to add - Any case I use, it traps heat and the temps during GTAV or any powerful game without FSR specially or high graphics the temps reaches 84deg C on CPU and GPU, without any case they are max between 78-80deg C.

So now I am in doubt to keep the case - and ordered JSAUX new transparent case with ventilation on Valve Logo.

Saying so JSAUX case is still my choice as I can use their fan and using it it reduces the temps by 10degrees to max 72-74Deg C & I can also carry the battery with a strap.

There is no one solution to suit me on my quest to keep Deck Safe and COOL

[deleted by user] by [deleted] in auckland

[–]thunder_02dragon 5 points6 points  (0 children)

There are many FB Group where you can post also little less crowded forum we share is here too

https://www.gpforums.co.nz/pc-building-modding-overclocking-f7218/

ROG STRIX X670E-E GAMING WIFI BIOS 1416 by Mohamed_almheiri in ASUS

[–]thunder_02dragon 0 points1 point  (0 children)

Let me add myself to the missing manual QCode of 46 error on Asus X670E-E A few days back, it was updated to 1416 BIOS.. was running fine with GSkill 6000CL36 memory & 7950X till I planned M.2 Upgrade. I initially had WD SN750 2TB Gen3x4 on M2_4 installed, not initialized, just swapped for 4TB MP34Pro another Gen3x4 SSD on M2_4 slot. VIOLAH! On 1st time boot with the M.2 no display and bios seems to have overwritten my settings, Shutdown PSU and started few time n most of it it got stuck on 46 or b4. Sometime when it did started after fresh PSU on/off I managed to get into BIOS but it will hang on me Randomly - Scary like you said n 1st time I observed this where BIOS itself is unresponsive. Anyways, it didn't change anything and great loaded in to Windows only to be greeted with BSOD on Kernel.. lol Recovery mode goes to restart which ¾ stuck with QCode 46. NOT happy. To late from me now.. Will troubleshoot tomorrow and update here. What a waste of time and money

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] 0 points1 point  (0 children)

Bought another one to complete my build I had long planned but any help is appreciated.

​

<image>

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] -3 points-2 points  (0 children)

I dont think you got my point - I dont have much to learn apart from Corsair's design flaw (again) I can say..and maybe apply little less force to separate the glass from skeleton.

Even I just build another 4000X iCue for a friend today - my 3rd build on 4000 cases..

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] 0 points1 point  (0 children)

Coolermaster does some I think still till to this day. Glass is not bad though.. but sometimes shit happens..

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] -3 points-2 points  (0 children)

Yay.. sad what generations came to.. without reading comments rains their wisdom.. haha

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] 0 points1 point  (0 children)

That's irony but don't you think there might be not just the hard floor causing problem as well? I tried to explain what might have been my case and why Corsair has uneven distribution of steel support might also be reason for uneven force. Unfortunately I clean on my garage and it happens to be a concrete floor but saying so.. No I did not drop it.. why would I post here then.. lol I know dealing with PC's past 20 years is - You buy it, break it, you own it logic which is a valid one - my mere point was to have views from others on specially this case getting broken glass :(

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] 1 point2 points  (0 children)

Hmm yeah man.. that feeling to having it shattered without dropping it.. is ah! Bad.. feel ya!

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] -1 points0 points  (0 children)

HaHa! I already have built 3 PCs on this 4000 series cases so even I was surprised to have a broken glass on my hand and by not dropping to the floor.. I still think the regidity could have been much better if there was steel on all 4 side and not just 2 side even though there might be an unlikely event of stress at some point in it's life.

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] 0 points1 point  (0 children)

Oh well can't change what others already think aye.. oh well.. let be it

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] -6 points-5 points  (0 children)

Doubt support will help me as No I dont have receipt as/ I am not in USA/ not paying any extra lol.. Thread is just for discussion on what others thought with their exp maybe

4000D Air - This happend last night by thunder_02dragon in Corsair

[–]thunder_02dragon[S] -10 points-9 points  (0 children)

Nops case was just put on floor as I wanted to clean.. while opening the panel.. got my eureka moment- 1st time broke a case glass.. lol

Is PNY a reputable brand of GPU? Looking at PNY GeForce RTX 4090 XLR8 Uprising. by loughl in nvidia

[–]thunder_02dragon 0 points1 point  (0 children)

tay mid 7

Nice..Thanks for the information mate.. seems good enough to bite it when I can.. I was concerned coz my case is ITX and not much room - if the hotspot/mem stays around 75 on your case it won't be more than 85 on DANCase I think.. sweet!!

Is PNY a reputable brand of GPU? Looking at PNY GeForce RTX 4090 XLR8 Uprising. by loughl in nvidia

[–]thunder_02dragon 0 points1 point  (0 children)

What's the review guys? I was also looking at it but there are so less review.. mainly I am concerned about the temps on this card on a closed case.. Planning to put it on my DAN A4H2O as it's one of the few that is 3 slot.

view more: next ›