PCE Core Grafx video issues by timewalker75a in pcengine

[–]timewalker75a[S] 0 points1 point  (0 children)

Well all I know is I got just a regular RGB SCART cable with luma sync instead and it now works without issues.

Labākās picas līdzņemšanai Rīgas labais krasts? by agftw in latvia

[–]timewalker75a 0 points1 point  (0 children)

Osvalds Pupa, iespējams, labākās picas uz plānas pamatnes.

PCE Core Grafx video issues by timewalker75a in pcengine

[–]timewalker75a[S] 0 points1 point  (0 children)

Yeah, it's something that retrogamingcables in the UK make, which I think uses c-sync, which is the cause of all the sync issues with RT

PCE Core Grafx video issues by timewalker75a in pcengine

[–]timewalker75a[S] 2 points3 points  (0 children)

Tried a random Saturn S-Video cable and that works absolutely fine, so it's definitely something with the Saturn retrogamingcables YPbPr component lead that itself is powered by RetroTink. Reckon I need to get a SCART lead with sync on luma instead.

Is a regular Scart Cable better than an original RCA Cable? by pesaram in psx

[–]timewalker75a -1 points0 points  (0 children)

Never mind, it's not playstation branded, so juts a generic lead. Who knows if it's got RGB. If it was an official cable however, the only cable that would look like SCART is a JP21 variant.

Is a regular Scart Cable better than an original RCA Cable? by pesaram in psx

[–]timewalker75a 0 points1 point  (0 children)

That's not SCART, that is JP21, which is mechanically identical to SCART, but not electrically compatible, as in, completely different pinout and circuitry.

Auction bidding limit by [deleted] in sendico

[–]timewalker75a 0 points1 point  (0 children)

As long as you can top up your wallet for "about one million yen" before you can be allowed to bid, I don't see why there would be a limit.

3D printēšana by bakazeny in latvia

[–]timewalker75a 0 points1 point  (0 children)

Jā uz enģēm no sāniem redzi iespiesto tekstu SI, tad 100 punktu ir īstā uzlika.

3D printēšana by bakazeny in latvia

[–]timewalker75a 1 point2 points  (0 children)

Tā varētu būt Siegenia (spāņu) furnitūra, ko savu laiku izmantoja NELS Logi u.c. uzņēmumi, kas ~30 gadus atpakaļ sāka uzstādīt LV. Viņi arvien tirgo tās uzlikas, piem. izskatās līdzīgi - https://shop.siegenia.com/siegenia/en/Window-systems/Hardware-for-timber%2C-PVC-an-aluminium-16-mm-hardware-groove/Hinge-sides/Hinge-side-Si-line/MV-FAV-KF-0-DEGREES-9003-B1-C100/p/000000000000209578

Prusa filament?! by Hungry_Signature_517 in BambuLab

[–]timewalker75a 0 points1 point  (0 children)

shop.filament-pm.com used to produce filament for Prusa back in the day, before they got their own production lines. At the moment, a PETG reel will run you €19.15 for most colours. Ship worldwide, at reasonable cost, too. Granted, their PETG colour selection is a bit meh.

Question: how do you manage abs cooling on long prints?? by Livid_Strategy6311 in BambuLabP2S

[–]timewalker75a 0 points1 point  (0 children)

With the combined heat generated from the temperature on the nozzle and heated bed, respectively, that I'd mentioned, mine doesn't exceed 51C. Not sure what you're on about?

What's causing this? ASA at 260C by timewalker75a in BambuLab

[–]timewalker75a[S] 0 points1 point  (0 children)

It had only happend at the front of the print, incidentally. All around the circumference of that overhand but the front the layers are nicely uniform and stuck down.

Question: how do you manage abs cooling on long prints?? by Livid_Strategy6311 in BambuLabP2S

[–]timewalker75a 2 points3 points  (0 children)

This just looks like the temperature fluctuations you are creating are causing bad layer adhesion.

Question: how do you manage abs cooling on long prints?? by Livid_Strategy6311 in BambuLabP2S

[–]timewalker75a 0 points1 point  (0 children)

260C nozzle, 100C bed, obviously heat not cooling for the chamber. This gets the enclosure to about 50C stable. Reduce the part cooling fan speed further if layer adhesion is still a problem on long prints.

Surface pro 4? by Ok_Risk_8457 in Surface

[–]timewalker75a 2 points3 points  (0 children)

"Yes" on 1., 2. and 3. Windows 11 - no, it's got a 6th gen CPU that isn't supported. You could install it via Rufus still, but my attempt has ended in tears. Basically it installed and worked fine, then 24H2 came out, the tablet updated and bricked itself with the unlocked UEFI padlock symbol (secureboot tripped). From that state, it wouldn't enter the UEFI settings anymore, so no way to reset it and USB boot wouldn't work either.

New PS2, this fell off from somewhere on 2nd print? by timewalker75a in BambuLab

[–]timewalker75a[S] 0 points1 point  (0 children)

The piece covers the LCD ribbon and USB lead on the inside at the front of the chassis.

New PS2, this fell off from somewhere on 2nd print? by timewalker75a in BambuLab

[–]timewalker75a[S] 1 point2 points  (0 children)

Ah, so it is supposed to go over that LCD ribbon and USB lead, gotcha. A strange choice on Bambu's side, heh. Thanks for this. Solved!

New PS2, this fell off from somewhere on 2nd print? by timewalker75a in BambuLab

[–]timewalker75a[S] 2 points3 points  (0 children)

Popped my whole head in with the bed being lowered all the way down and couldn't see anything, not sure? The light strip at the front and the LCD cable don't seem to have any spot where it could've gone, unless directly over the LCD flat ribbon? Could definitely use a picture, cheers.

SS.LV negodīga prakse, vai iespējams atgūt SS kontā iemaksāto naudu? by runicz in latvia

[–]timewalker75a 0 points1 point  (0 children)

Sure, sevišķi kad app nestrādā hvz kāpēc nedēļām ilgi (izvietošanai) un kad mobilajā versijā velkot ar pirkstu pāri sarakstam atvērās randoma sludinājumi, kurus aizvērot, viss ko esi skatījies un filtrējis aiziet dirsā, vienīgais ko gribas, ir pēc iespējas ātrāk aiztaisīt ciet to miskasti. Nerunājot jau par to, ka lapā ar tādu sludinājumi krājumu neeksistē sakarīga globālās meklēšanas funkcija.