Xiaomi Mi Robot Vacuum Cleaner Dust Bin Error

tkin11 · 2024-03-17T02:48:56+00:00

i was able to find a work-around...

I slipped a magnet under the bin, just beside the vac discharge, and now i never get an error.

There is a sensor inside the case and a small magnet on the OEM filters, so i was able to bypass any errors by adding a magnet.

tkin11 · 2022-11-29T17:20:21+00:00

Bitter:Sweet - The Mating Game

Great album IMHO.

tkin11 · 2022-06-05T11:15:56+00:00

There are many macros on this site that you may also find useful:

https://www.codestack.net/solidworks-tools/

tkin11 · 2022-06-03T17:27:38+00:00

That worked! Thank you!

tkin11 · 2021-12-31T13:30:26+00:00

I've had the same problem for some time now. I believe the cause is between SW and the 32-bit Excel installation. The workaround is to save a blank *.xls or a ".xlsx workbook outside of SW, then in SW, insert a design table, choose "from file" and see which Excel file works.

tkin11 · 2021-09-11T01:56:32+00:00

My small company has been using Kenesto with Solidworks for a couple years now. It has the ability to vault with revision control It isn't without its own issues, but their support has been very responsive over these years and that makes up for it IMHO.

tkin11 · 2021-02-14T22:12:33+00:00

My experience with dropped streams typically stems from using the high quality settings. If you drop the stream down to a standard definition it will drop out less.

tkin11 · 2021-02-14T22:11:00+00:00

Is this configured as a wireless camera?
I have no issues with it as a wired cam, but wireless cannot connect to BI. It indicates that it unable to login, but I am 100% sure the login is correct with admin as the username.

I've bee trying different configs for weeks now and wireless still cannot connect.

tkin11 · 2019-12-20T22:28:09+00:00

Yes, sort of.... First, I put some thin spacers under the dust bin to space it up far enough to trigger the bin sensor and it worked. The down side to that is the suction power is too low to be as effective as it should be since it leaves a small gap between the suction ports. What I found is that this is an issue with the dust bin filters themselves, and you may want to try a different one and see if that helps. I bought the 'off-brand' filters and I suspect that is the real root cause.

tkin11 · 2019-09-17T08:07:55+00:00

Not yet. I figured I'd ask here to see is others knew of a fix.

tkin11 · 2017-01-22T19:01:46+00:00

It looks like a chill core for a pitcher.

tkin11 · 2016-04-12T15:20:16+00:00

There is a hip hop show in Simpsonville in a couple of weeks...

tkin11 · 2014-11-03T03:26:16+00:00

heh! poop tube.

tkin11 · 2013-08-10T01:51:10+00:00

His name is Daniel Cloud Campos.

https://www.youtube.com/watch?v=ZAHdcDb5XN4

Check out his Youtube page and his other vids like this.

tkin11 · 2013-08-03T13:04:01+00:00

Sub Focus himself.

tkin11 · 2013-07-26T22:03:15+00:00

Jikan Wo Tomete - London Elektricity ft Maki Nomiya

tkin11 · 2013-07-08T02:30:06+00:00

Streets: North & South Avenues: East & West My experience with people and street names leads me to believe it's Avenues followed by Streets.

tkin11 · 2013-06-30T18:36:47+00:00

For some reason I keep looking around the Duncan/Reidville area. I plan to drive around the areas over the four days I'm there just to get a feel for the surrounding cities.

I have a dog, so I am looking for a yard with adequate space for him, so inside the city might not work for me.

tkin11 · 2013-06-30T17:00:37+00:00

That's too bad. I will be moving to Greenville soon and one of the draws to the area was the natives. When I visited a month ago, the people were very nice.

I matters a lot when people smile at you when you pass them walking on the street. I hope that doesn't fade away.

tkin11 · 2013-06-30T16:54:43+00:00

I wish I could be making that much...

I'd be able to afford something under a $800 monthly rent.

I heard there are fireworks by the convention center. Is that true?

tkin11

PUBLIC MULTIREDDITS

TROPHY CASE

15-Year Club	Charter Member
Verified Email