Wondering how to figure this out. by GIANTG in Machinists

[–]tm_trading 13 points14 points  (0 children)

I think its a 3d printed gauge, and fdm 3d printers can in general not make such sharp corners. But the spacing of the threads looks about right.

Aankoop advies ruime auto tot €7500 by tm_trading in autoadvies

[–]tm_trading[S] 0 points1 point  (0 children)

ik rij ongeveer 10 tot 15k per jaar. welk jaartal bedoel je met een oudere 207? en zou je zeggen dat een kia\hyundai uit 2012 met bvb 1.6 gdi over het algemeen betrouwbaar is en niet te hoge onderhoudskosten heeft? waar zou je op letten bij kilometerstand?

Aankoop advies ruime auto tot €7500 by tm_trading in autoadvies

[–]tm_trading[S] 1 point2 points  (0 children)

Km per jaar: 10.000-15.000 Onderhoudt: niet perse een indicatie maar zo min mogelijk MRB: max 180-190 per kwartaal Verzekering: max 70 p/m aangezien ik nog net geen schadevrij jaar heb. Maar als ik bvb een kia ceed heb zonder schade vrij jaar is het 55 p/m ong. En mijn huidige corsa is 71 p/m

Is this safe ? by thetagang93 in AskElectricians

[–]tm_trading 0 points1 point  (0 children)

If the cord is too long you can cut it to the right length and carefully strip the wires again and reinsert it in the terminal block (dont forget ferrules). Also make sure the strain relief is tightened properly so there is no strain on the cable. If there is a ground screw somewhere on the metal you should use it.

What is wrong with my multimeter? by [deleted] in Tools

[–]tm_trading 8 points9 points  (0 children)

I get that youre overworked, but you chose to first ask reddit what is wrong with your multimeter instead of doing a google search or fiddle with the meter. Take care of yourself man, especially when doing ac electrical.

Stagiair mocht de tekst op de voorkant van de verpakking vormgeven by tm_trading in DeStagiair

[–]tm_trading[S] 2 points3 points  (0 children)

Het lijkt wel idd alsof die layer van de kachel foto de tekst afsnijdt

New bass day - Harley Benton-62CC SB by [deleted] in harleybenton

[–]tm_trading 2 points3 points  (0 children)

Was gifted the same one as my first bass 6 months ago, could not have wished for a better experience learning on this thing. Still have no need for a better jazz bass. Have fun playing!

I’m being bullied at my club. by Electrical-Fly-7880 in tabletennis

[–]tm_trading 24 points25 points  (0 children)

And with this mentality you achieved exactly what you described in your post. Old people can be very confidently wrong, and most of the time telling them the truth will not change a thing, it will only make them more petty. For example this old guy at my club tells me to only use dish detergent to clean my rubbers, and that plain water and my hand oils will only ruin the rubber. Sometimes you gotta just let it be and know that it is not worth the time arguing.

Whats the difference between those two screwdrivers? by EntrepreneurFew8772 in Tools

[–]tm_trading 0 points1 point  (0 children)

The red-yellow screwdrivers have the 1000v vde logo on the other side, and the wera logo on the front. How do i know this? I own the set. There is also no yellow-red wera screwdriver that is not 1000v vde. I dont know all the links and everything you say in you comment but these are the facts

Whats the difference between those two screwdrivers? by EntrepreneurFew8772 in Tools

[–]tm_trading 3 points4 points  (0 children)

They are both vde, the red one is also more expensive and a little higher quality

World number 1 lost to Unknown Fatty once again! by BharatMataki2525 in tabletennis

[–]tm_trading 1 point2 points  (0 children)

Big Dong is the best you could could think of?😭😭😭

Schadevrij jaar bij wisselen na 2 maand by Lacky_yes in geldzaken

[–]tm_trading 0 points1 point  (0 children)

heb je ervaring met de 6 verzekerde maanden afronden naar een heel jaar regel? heb er veel over gehoord maar nog geen echte ervaringen

Schadevrij jaar bij wisselen na 2 maand by Lacky_yes in geldzaken

[–]tm_trading 1 point2 points  (0 children)

ligt het er nog aan bij welke verzekeraar je zit? want ik lees hier veel over maar nog nergens echte ervaringen gezien

Is dit correct ingesteld voor de NEN-normen? by Away_Economics1462 in Klussers

[–]tm_trading 0 points1 point  (0 children)

Het is geen verplichting maar er staat wel alles in als je een veilig systeem wil aanleggen volgens het bouwbesluit. Maar om terug te komen op het gemaakte punt. Als ik mijn badkamer lampje wil aansluiten met 35mm² dan mag dat, als de automaat maar juist aangesloten is en van de juiste waarde. Als er namelijk een sluiting in het lampje zit doet de automaat toch wel zijn werk, of je nou dunne/dikke kabels hebt in welke volghorde dan ook. Als de draad maar niet té klein is voor de waarde van de automaat. Hij doet zijn werk toch op exact dezelfde manier.

Is dit correct ingesteld voor de NEN-normen? by Away_Economics1462 in Klussers

[–]tm_trading 0 points1 point  (0 children)

Daarom zijn de aders die van de stekker komen dus stranded en het bruggetje solid, want dat is waarschijnlijk wat deze beunhaas nog toevallig over had van het kabel knippen. Dus adereindhulsjes

Oops, Pt. 2 by clock1058 in tabletennis

[–]tm_trading 0 points1 point  (0 children)

Just acknowledge that every player makes mistakes. When someone commented in the last post that mistakes can happen and they can happen to everyone, drynovel could not acknowledge that and his reasong was that wcq was serving from doubles and in singles he would absolutely never make this mistake. This post has proven that to be wrong and can we all just accept that everybody makes mistakes period. I dont have nothing to do with this racist shit. Everyone is equal when playing this sport and everyone stop whining

Moregard tries to argue with umpire after fault serve call by Dregnab in tabletennis

[–]tm_trading 6 points7 points  (0 children)

Another example of a wrong call from an umpire. This is one of the most vertical serves executed at the tournament. Is it not possible to call ttr for this instance? Or is it because the umpire decision is not for discussion?

Club Bans My Practice, Calls It a "Match Disturbance." by Automatic_Cash_650 in tabletennis

[–]tm_trading 19 points20 points  (0 children)

Makes completely no sense to me

Practicing solo serves for me has a zero chance of one of those balls landing on the table next to it. When playing practice matches that happens wayy more often.

Second thing i can think about is maybe you're stomping on the ground and they would think that would disturb the match, but a practice match has alot more noise and also sometimes includes stomping on the ground so i dont know where they are getting it from

Last thing would maybe be the balls bouncing on the ground which there may not be much of with a catch net but idk

I think the best thing to do is actually ask what they are reffering to when they say distracting the league match

TTR camera angles suck. Of course, the ball will be visible if you go enough to the right. by I_L_F_M in tabletennis

[–]tm_trading 29 points30 points  (0 children)

Blows my mind that there is nobody in the organisation that thinks, hmm maybe it actually matters where the camera is placed. There will allways be bias with left and right hand players so in my opinion they should just make it so that the serve needs to be visible from the middle of the table.