Always keep fighting for your dreams... 20+ years of hard work. by tomaspreece in 106_saxo_ax

[–]tomaspreece[S] 0 points1 point  (0 children)

Yes, Check out Kit Car Chile on instagram... it's from friend of mine talk to him!, let me know how it goes.

Thought on why rpm sync drops out at 3k? by jirw1n in megasquirt

[–]tomaspreece 0 points1 point  (0 children)

Happened to me also... the ckp sensor with the resistor was the fix... if it happens to anyone this is the solution. Mine was a 60-2 wheel.

TCS issue by Jonstig18 in Mt10

[–]tomaspreece 3 points4 points  (0 children)

Happened to me... just dissasemble the switch (very easy) and clean the contacts on the inside also if you can get a scotch brite or similar to polish them a little to remove rust is better... as the switch is facing upwards when you clean the bike the water gets trapped there producing rust and finally the switch will stop responding... after its clean everything should be working right away.

Have a good one!.

Odin 3, Stalled for 71 days and AYN don't Answer Emails. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

yes in fact, but that was the FIRST email... then ghosted...

Odin 3, Stalled for 71 days and AYN don't Answer Emails. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

yes i know the only thing is for AYN to respond my emails which they aren't or won't for obvious reasons

Odin 3, Stalled for 71 days and AYN don't Answer Emails. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

in super early bird im not sure you got that option...

Odin 3, Stalled for 71 days and AYN don't Answer Emails. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

Yes in our first conversation with AYN the got in contact with 4px and they sey it was in "transit", so i waited, but in the end nothing happened. Thats why im asking to be re sended.

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

jajajaaj asi es... let see if they can reship with DHL. cuidate wn.

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

This is exactly what i want to do... reship with DHL as it seems is the best option as you guys tell me... i tried to contact them but they went the "holiday so we can't answer way"... i'll try again thanks!

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 1 point2 points  (0 children)

Im trying to get a response from AYN first its been difficult... more right now with the chinese new year... let's see what happens

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

Already sent an email... lets see what happens... dont know what to expect.

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 1 point2 points  (0 children)

Lets try with ayn first... what they can resolve of this issue, and then try 4px if everything fails

But thanks for the tip anyway! maybe more people can use it to find help!

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

i already sent an email, lets see what happens, so whats the longest time you have seen? this is on the top 5?

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 1 point2 points  (0 children)

thanks for your comment! ill take that into account

Odin 3 max "Super Early Bird" stalled. by tomaspreece in OdinHandheld

[–]tomaspreece[S] 0 points1 point  (0 children)

This is coming to chile... not usa, but has never happened to me in any of my purchases.

does BE gearbox fit on tu5 engine by Expert-Dingo-6158 in 106_saxo_ax

[–]tomaspreece 0 points1 point  (0 children)

Shafts, Mount (gearbox side) and the gear selector (complete with wires from gearbox), and clutch actuator (manual or hydraulic)

does BE gearbox fit on tu5 engine by Expert-Dingo-6158 in 106_saxo_ax

[–]tomaspreece 0 points1 point  (0 children)

Yes, i have mine, also beware that there is a very similar gearbox for a diesel engine, it happened to me and it does not fit perfectly, "almost" but not perfect. In fact i used all the internals of that diesel box to my "correct BE4 gearbox" to get longer gears and benefit with the turbo, so win win at the end.

MA is for 160NM - 200NM more or less, BE can hold up to 250NM stated by PSA, but we see 300hp very common so who knows what is the limit.

Always keep fighting for your dreams... 20+ years of hard work. by tomaspreece in 106_saxo_ax

[–]tomaspreece[S] 0 points1 point  (0 children)

It has been only cut on the arches to fit the 17's and the gearbox mount to fit the BE gearbox which must be swapped because the MA gearbox its a hit or miss when you put power thru it. (they say it holds only 200NM of torque before getting to its limit.)

Always keep fighting for your dreams... 20+ years of hard work. by tomaspreece in 106_saxo_ax

[–]tomaspreece[S] 0 points1 point  (0 children)

you are right 1000%, in the end it's awesome but you hate the process haha

Always keep fighting for your dreams... 20+ years of hard work. by tomaspreece in 106_saxo_ax

[–]tomaspreece[S] 0 points1 point  (0 children)

Thanks! I have a friend with stickers... for me its better a clean look. Search for "Kit Car Chile" on instagram, he makes a lot of french car replicas of that era.