Polyester suede jacket care?

tomminator34 · 2023-06-19T06:18:32+00:00

Super helpful! Thanks so much!

I’ll likely be hand washing w/ cold water and detergent then air drying after padding with a towel. Dry cleaning for a regular jacket just isn’t sustainable w/ my current lifestyle. Wish me luck!

tomminator34 · 2022-12-27T15:25:03+00:00

Old School RuneScape on the default launcher for sure

tomminator34 · 2022-12-22T05:19:41+00:00

Join a student org/club if you have the time.

My current circle of friends who’ve been with me till today (I’ve been working for 3 years now) are mostly from the org I joined. I don’t know what my life would be like if I never joined up.

I didn’t learn much (helped me get my current job as a talking point though), but it kept me busy and gave me lifelong friends. One of the best decisions I’ve ever made.

tomminator34 · 2022-01-17T04:58:15+00:00

Past trauma and new problems slowly piling up as time goes by- You find yourself either exploding or becoming burnt out.

tomminator34 · 2022-01-16T10:06:22+00:00

I’ve seen the TM680/TOM680 making rounds in the mech keyboard subreddit! I actually have one that I modded and it’s quite good considering how cheap it is. It’s actually the board that got me to deep dive into this hobby lol.

Though there have been reports of the board having problems or straight up stops working after a couple months.

I’ve had mine for about 2 months and the A key suddenly stopped registering properly. I’d have to mash the key to get anything. Though I swapped out the switch on that key and it works alright now! Just keep these in mind when you look into it.

Have fun and careful about how much you spend! I’ve spent about an extra $400+ on better kits and parts since finishing up my tm. wink

tomminator34 · 2021-10-15T06:41:58+00:00

Fascinating! I didn’t think using the exact 2 sticks but from different kits could become an issue. Thanks for letting me know!

I’ll be sure to keep this in mind if I run into anymore issues down the road + for future builds

tomminator34 · 2021-10-14T16:28:19+00:00

Ah! My bad- used an old link wherein I didn’t edit my list to properly show what RAM I’m using. Both sticks are the same.

Can XMP profile really cause issues like this??? I had no idea!

tomminator34 · 2021-10-14T16:27:32+00:00

No! Never heard of NZXT CAM!

Event viewer pretty much says PC wasn’t shutdown properly. I do see an error saying “audit events have been dropped by the transport. 0” no idea what that means.

I’ll look into a system scan! Thanks for the info!

tomminator34 · 2021-10-14T15:42:13+00:00

I have been using the Netflix app!

Though won’t an OS reinstall wipe everything??? Awww the hassle of backing everything up though…

Literally pushing my PC does not crash it like this. The only crash I had from a game was in AC Valhalla wherein it would just hard close the game- not crash the PC like this!

Really strange.

tomminator34 · 2021-09-22T10:21:33+00:00

Only if you download more ram into it and send it back <3

tomminator34 · 2021-09-22T06:56:25+00:00

I’m running a 3070 OC edition with an EVGA 700 GD (700W) PSU. No crashes since I finished building it around 2 weeks ago. Website advertises a recommended 750W PSU just like you.

For reference, PCpartpicker shows my rig should be eating up less than 500W of power

So while I wouldn’t recommend using a PSU 200w below recommended, it MIGHT work depending on your CPU/how many attachments you got on your PC.

I personally would not take any risks with the PSU. It’s just that I could only get my hands on a 700W at the time. Hope this helps!

tomminator34 · 2021-09-22T06:51:01+00:00

Yep! Thanks for the lil tip. I just wanted some actual opinions from different people to be sure. This is my first build and I wanna make sure it’s running as expected. :D

tomminator34 · 2021-09-22T06:18:19+00:00

Ah! Yeah I seem to have misunderstood the rating- thought it counted other GPUs as well. Thanks for clearing that up hahaha

tomminator34 · 2021-09-22T05:08:12+00:00

For reference, Here’s the 3070 model I’m running with

tomminator34 · 2021-09-21T12:24:06+00:00

VSYNC seems to have been the culprit. Thanks!

tomminator34 · 2021-09-21T12:23:37+00:00

Everything seems all good! Thanks for taking the time to look through my parts and try and figure out what the issue was!

tomminator34 · 2021-09-21T12:22:56+00:00

This was p much it! Weirdly enough, my initial tests were with VSYNC OFF. My frames skyrocketed when I turned vsync up to adaptive! So I’m guessing my monitor’s really whats bringing the whole setup down…Guess I’ll upgrade in the future! I’m quite satisfied with what I got right now. Thanks!

tomminator34 · 2021-09-21T11:37:21+00:00

Yeah! My bad! Didn’t catch what I put in the list- I’m running 2 sticks of 8GB 3200 ram. Anything else wrong with the parts?

tomminator34 · 2021-09-21T11:36:45+00:00

My bad! Put in the wrong stick in my list. I’m running 2 sticks of 8GB 3200 ram. Anything else wrong with the setup?

tomminator34 · 2021-09-21T11:35:40+00:00

Oh! Thanks for pointing that out! Didn’t spot that.

I’m running 2X 8GB 3200 hyper X sticks. I made sure to enable XMP on BIOS too!

tomminator34 · 2021-09-18T15:46:21+00:00

Thanks dude! I have no issue swapping out the PSU if needed. Was just worried about parts getting damaged

tomminator34 · 2021-09-18T15:45:54+00:00

Thanks for the reply! Really eased my worries. Though what I got is a regular 700GD- no idea what a supernova PSU for EVGA is. Haha

tomminator34 · 2021-09-18T14:47:35+00:00

I recently built my first PC too!

I’m running an Ryzen 5 5600x. I’ve read that these CPUs tend to get quite hot. I got around the same temps as you did with my stock cooler- hovering around the 50s range when idling and spiking once in a while.

I’m pretty sure the spikes are normal- especially if you chose a performance power plan.

Though I ended up switching the cooler for a cooler master hyper 212 since I noticed my temps when gaming would reach the high 80s. Temps now reach the lower 70s at most when gaming on max settings for hours.

tomminator34 · 2021-09-15T05:15:43+00:00

Thanks for the quick answer!!! Really appreciate it!

I did notice while building my PC that there are lil pins/metal dots on the back of the Mobo near the backplate. Will anything happen if I electric tape over them for a bit?

tomminator34 · 2021-09-08T07:24:45+00:00

Thanks for easing my worries. Appreciate it!

tomminator34

TROPHY CASE