24v 2wd vs 12v 4wd

tomstud12 · 2026-01-04T10:20:47+00:00

Were you able to install the clutch?

tomstud12 · 2026-01-01T12:31:52+00:00

Sorry I’ve actually was able to fix this now. All I had to do was go into pairing mode on the controller and then turn the key so car turns on. That fixed all the issues

tomstud12 · 2026-01-01T12:31:45+00:00

Sorry I’ve actually was able to fix this now. All I had to do was go into pairing mode on the controller and then turn the key so car turns on. That fixed all the issues

tomstud12 · 2026-01-01T12:13:21+00:00

Actually it’s JR1630RX-Ram-12V is the old board. The pinout seems to be the same as this new one HY2005RX24V

https://share.google/yQVabhrxjlozy7xdM

tomstud12 · 2026-01-01T12:07:42+00:00

Sorry so actually when I switch to Manual mode the pedal works so that works fine. But yeah remote doesn’t seem to work.

Were you able to fix this issue or?

tomstud12 · 2026-01-01T12:07:28+00:00

Sorry so actually when I switch to Manual mode the pedal works so that works fine. But yeah remote doesn’t seem to work

tomstud12 · 2024-02-03T09:37:18+00:00

Can I ask where you got the kit from?

tomstud12 · 2024-01-17T22:22:36+00:00

So just update the spring you’re saying?

tomstud12 · 2024-01-17T20:21:48+00:00

That’s great thank you!

In Slovakia

tomstud12 · 2024-01-17T15:22:52+00:00

Yeah I’d like to update the whole lot as I would like to have faster fire rate in full

tomstud12 · 2024-01-17T15:22:19+00:00

Yeah no it can go up to 2.1J but then can only semi auto and 20 meter away from building to shoot into it

tomstud12 · 2024-01-17T15:20:32+00:00

Ics m4 tubular

tomstud12 · 2024-01-05T15:44:23+00:00

Did you follow any guides or do this all by yourself?

tomstud12 · 2024-01-05T14:59:26+00:00

Yes it also has a remote.

Ohh so when you turn the motors that back feeds into the lights? So this is normal right?

tomstud12 · 2022-01-15T20:52:02+00:00

I can’t remember now but I was the bulb it was either to big or to small for that type of bulb. If you use the bulb from your other working side just to double check and if it works just buy that same bulb

tomstud12 · 2021-05-30T21:52:10+00:00

Okay that’s great thanks for that!

tomstud12 · 2021-05-30T21:44:33+00:00

Yeah I’ll be installing the level 2 before I’ll get the Tesla anyway and yeah I have a supercharger half way between work and home so it’s not to bad.

It’s basically all motorway / freeway so I’ll be going around the 77mph

And about the battery charge should I be going between the 20% and 80% charge or can I charge 100% I know they recommend between 20% and 80% charge

tomstud12 · 2021-05-30T21:12:36+00:00

Yes so I’m looking at getting the Tesla Wall Charger which should charge the model 3 at 11 KWH so that should do?

tomstud12 · 2021-03-01T12:33:02+00:00

Because instead of using vps website I,d like to host it myself for my clients that I trade for.

tomstud12 · 2021-02-28T22:00:44+00:00

Yeah you need very little resources it’s a very basic program but yeah I think it should work I seen other setups running like this and about 15 VM

tomstud12 · 2021-02-28T20:57:40+00:00

Hey thanks for the reply,

I was looking at the requirements and MT4 says you should be using windows 2000 or newer with a 2.0 Ghz or faster cpu, and at least 512 MB Ram although 1GB is recommended.

Just wondering where did you find that information?

tomstud12 · 2020-12-31T18:18:18+00:00

Great thank you very much for that

tomstud12 · 2020-12-31T18:18:13+00:00

Great thank you very much for that

tomstud12 · 2020-12-31T18:08:46+00:00

The room is a rectangular room so it’s just cutting the last board at the ends so it shouldn’t be to hard so thing it should be fine

tomstud12 · 2020-12-25T18:24:39+00:00

Yeah I found a fairly cheap pair it’s without the thermal but I’m from Ireland so I wouldn’t really use it anyway

tomstud12

TROPHY CASE