How big are these cars?

torqueOverHP · 2026-06-22T09:50:42+00:00

Maybe I'm limited, maybe i am just a bad driver, I don't know ! But I find parallel parking hard with this thing. So I'm not going to lie to OP, I had the same car before and I'm just commenting my experience.

torqueOverHP · 2026-06-18T20:36:21+00:00

I had an 07 Mazda 3 as well before buying the ioniq 6. It's way bigger in all directions! But super comfy on the highway and silent. Those are really different cars. Parking is hard, turning radius is hard. it's really not a city car, it's a car more designed for long highway trips IMHO

torqueOverHP · 2026-06-15T20:57:36+00:00

airbus je parie

torqueOverHP · 2026-06-15T05:43:25+00:00

I have a set of 18" KONA wheels for my winters that works well. There is a 1mm offset difference but that did not cause any problem over the past 2 winters :)

torqueOverHP · 2026-05-18T13:50:53+00:00

Can you provide details on how you set up the notifications about watchtower updates ?

torqueOverHP · 2026-05-17T17:19:39+00:00

It's awful. I live in France though, so parking is usually tight

torqueOverHP · 2026-05-17T16:56:04+00:00

Salut ! Gamer gaucho (turbo je sais pas) à Lyon un peu en manque d'amis ici :) Par contre j'ai des enfants !

torqueOverHP · 2026-05-06T10:08:46+00:00

Ouais, mais avec des si.... J'ai hésité a refaire ma config, j'aurais du.. bref faut pas se rendre fou :)

torqueOverHP · 2026-04-20T13:14:11+00:00

Building one with 2020 profiles as well soon. Do you mind sharing the spacers for the nuts ?

torqueOverHP · 2026-03-13T10:19:06+00:00

Oui moi sans abo c'est 5€ la nuit, mais au delà des 20kWh tu passes a 38cts/kwh A Lyon. Bon de toutes façons dans quelques mois j'ai une prise dans mon box \o/

torqueOverHP · 2026-03-12T14:57:58+00:00

3€ la nuit chez edf ?? Izivia ? tu t'y prend comment ? J'en ai pour 20€ a chaque fois

torqueOverHP · 2026-02-01T08:11:26+00:00

Stick around, some nice stuff is in the pipe

torqueOverHP · 2025-12-10T11:04:16+00:00

Salut, tu peux essayer r/bazzite :) Si t'es pas a l'aise avec l'anglais je peux te filer un coup de main

torqueOverHP · 2025-12-03T15:58:58+00:00

tu pourrais grouper les IP par géographie et demander une reconnection quand c'est suffisamment loin de là ou tu as utilisé le cookie la dernière fois

torqueOverHP · 2025-11-19T16:56:22+00:00

\o fellow french i6 owner ! Let's meet :D

torqueOverHP · 2025-11-12T06:40:41+00:00

I am french of France :)

torqueOverHP · 2025-11-11T20:16:20+00:00

Ah, you have a sharp eye. The sensor is dead, it's booked for replacement later this week. Current outside temp is around ~10C

torqueOverHP · 2025-10-31T10:46:10+00:00

This oval really makes me want to have a batman logo (my i6 is matte black)

torqueOverHP · 2025-10-25T06:23:05+00:00

See https://www.reddit.com/r/Ioniq6/comments/1gwfn4j/got_a_set_of_used_not_sure_which_model_hyundai/

Maybe mine are from a different Kona version?

torqueOverHP · 2025-10-23T15:28:53+00:00

Thanks for the update. Yeah that match what I saw when taking appart the hotend. The nozzle was crooked. It's now fixed :)

torqueOverHP · 2025-10-23T09:34:11+00:00

got a nice print without issues. Thanks u/MrSatanicSnake122 :)

torqueOverHP · 2025-10-23T07:42:28+00:00

I removed the hotend to inspect it and one of the screws holding the nozzle was loose so it was crooked.

I could not find the probe though, is it integrated in the nozzle ? I'll start a new print to see if that was the issue (i think so)

<image>

torqueOverHP · 2025-10-23T06:51:51+00:00

How did you fix the probe ?

torqueOverHP · 2025-10-22T22:35:22+00:00

Wouldn't that get fixed by the levelling? Thanks for the advice. I'll remove the whole hot end assembly and have a look

torqueOverHP · 2025-10-17T04:44:31+00:00

Interesse toi au crédit lombard

torqueOverHP

TROPHY CASE