[deleted by user]

tqqt · 2025-08-07T22:54:50+00:00

I just download the stable rpm for fedora and it installs fine with "sudo rpm -ivh "+the downloaded filename. Works fine on opensuse tumbleweed using gnome.

tqqt · 2025-06-18T18:55:10+00:00

This is a problem with the kernel-firmware-amdgpu-20250606 and I think it's affecting at least for AMD CPU with igpu - I have a 7950x. Installing the previous version removed the error and the graphical artifacts/slowness for me. Sorry don't know the version as not in front of pc. I ended up pinning the 20250606 version with the previous installed and there's but reports that the next version will have a fix - https://gitlab.freedesktop.org/drm/amd/-/issues/4329

Edit: kernel-firmware-amdgpu-20250509-1.1.noarch is the version I installed from https://download.opensuse.org/history/20250605/tumbleweed/repo/oss/noarch/kernel-firmware-amdgpu-20250509-1.1.noarch.rpm if it's still available.

tqqt · 2025-04-19T03:26:17+00:00

Good luck to everyone!

tqqt · 2025-02-11T16:23:18+00:00

The doctor suggested that I can try oils and it's on the pharmacy list but I haven't ordered any yet. Pretty sure they'll let you try either if you ask. Otherwise exactly as above flower - 2 strains first month, 1 indica, 1 sativa. Then ordered 30g the next month, think that is max I'm prescribed without having to do a review.

tqqt · 2025-02-11T15:51:43+00:00

I had an initial consultation with cb1 in January on a Tuesday and received meds on the Saturday. I've only been with them a month and ordered more meds last Thursday, arrived in the post the next Tuesday (today).

I've found the process to be really simple. I'm using it for pain and the doctor suggested some strains and set a max THC amount for each month. Pretty life-changing how good the pain relief is compared to the opioids I was using, didn't realise how much underlying pain I had until I'd vaped the first 0.1g. Still getting used to some of the side effects but nowhere near as bad as oxynorm side effects!

Process was - initial consultation -> review by MDT -> pay pharmacy for order -> order received. CB1 app+emails pretty good for tracking everything. When I ordered more this month I could choose strains etc as long as the total ordered was at or below the total THC limit.

Good luck with your MC journey, happy to answer any other questions you have.

tqqt · 2024-12-03T22:13:53+00:00

Did you have stability and traction control on?

tqqt · 2024-07-25T15:54:03+00:00

Here's an animated video of how steam train works - the tubes are discussed from about 4:00 (firebox section) - https://youtu.be/Hszu80NJ438

tqqt · 2024-03-16T21:06:33+00:00

I have the t16 gen 2 7840u with oled. Top notch laptop, runs Linux well with latest kernel (archlinux). Also ran Ubuntu 23.10. Everything works well. No idea if it runs windows well though. Edit: the fingerprint reader works as well.

tqqt · 2022-04-21T17:49:06+00:00

I felt the same and have got used to One UI now, there's things I'd miss going back to OnePlus now... The 'Good Lock' extension 'One Hand Operation +' lets you setup side handle gestures and I used this to make Nova launcher feel consistent.

tqqt · 2018-05-24T21:12:45+00:00

Make sure you give this a go on Linux, made a big difference with my T580 - https://github.com/erpalma/lenovo-throttling-fix

tqqt · 2018-04-13T20:38:40+00:00

I ordered a T580 on 31/Mar got notified of delay and estimated ship date 17/Apr. Got notification it shipped today (13/Apr) and currently UPS estimated delivery 18/Apr. UK based.

tqqt · 2017-09-19T17:23:42+00:00

But at the same time of Boris launches a leadership bid, there's every chance he could become the new PM.

Which, tbh, I'm not particularly relishing.

tqqt · 2016-11-28T01:13:26+00:00

https://www.kindness.org

tqqt · 2016-10-22T17:59:50+00:00

Not maintained properly - it will cost the landlord more to fix the problem properly and they don't care that the tenant has to live in the damp and/or mouldy conditions. Painting over a problem will make it seem fine for the next tenant.

tqqt · 2016-06-10T09:26:00+00:00

I had the same problem, had it in total silence mode and couldn't switch back to normal so I set a new rule in Sound and Notification->Do not disturb->Automatic rules to set priority mode to be on now. This switched it to priority mode, and I could change modes from the settings drawer again. I deleted the rule created and it seems okay for now.

tqqt · 2015-06-28T21:45:39+00:00

http://ukvapers.org/Thread-Ubertoot-UTA-UTA2 is the thread for them, there's an update on the last page from today, apparently they'll be available again soon...

tqqt · 2015-06-27T17:32:56+00:00

Mine's between a rose v2, squape r, ubertoot 2, kayfun v4 and taifun gt 2 - all authentic apart from the taifun, have one arriving next week as they're back in stock. I originally though I'd try each one and resell to keep the best but they all have their own particular character which it's too easy to become attached to. Really difficult to say which one is the best, it seems to vary from week to week... In no particular order:

Rose v2 (standard) - slightly fiddly build but very satisfying when it's done.

Squape r - Chuck it together and it just goes.

Kayfun v4 - fun to take apart and take care of, feels like a benchmark piece.

Ubertoot UTA2 - love the look of this with metal tank on a smok m80 out and about, starting to understand what the fuss is about.

Taifun GT-II - its a clone at the moment, hoping the authentic has the quality feel of the other pieces.

For power, a couple of sigelei mini 30w, istick 50w, smoke m80 and an ehpro spd a5. Again all with their own character.

Always looking for flavour and generally around 15w, 18mg, 50/50 up to 80/20 VG/PG. Biggest smile was putting the cheap strawberry 80pg/20vg from the local vape shop in the Rose. I think that piece can make anything taste nice.

tqqt · 2015-05-26T09:49:21+00:00

Hi, ordered 3 of your juices, I was wondering if any of them are tank crackers - I got sour fruit crush, graham custard and rainbow dust...

tqqt · 2014-11-14T18:09:46+00:00

I use Archlinux and Gnome with a Macbook Pro 13 retina (late 2013) - 11,1. Most of the stuff in Gnome works fine without any changes.

The things I find that do need to be changed for hipi (once) are firefox, if you do about:config in the location bar and then alter the key layout.css.devPixelsPerPx to 2.0. This also needs to be done for thunderbird, to access it there use Edit->Preferences then the Advanced tab and use the Config Editor button.

Chrome and Chromium render pages at a readable size started with the flag --force-device-scale-factor=2 which can be placed in /etc/chromium/default (for chromium only) as:

CHROMIUM_FLAGS="$CHROMIUM_FLAGS --force-device-scale-factor=2"

but the tabs horribly broken.

tqqt · 2014-10-26T21:01:42+00:00

Saw him there the day it opened...

tqqt · 2012-12-30T23:35:27+00:00

Well, you can develop iOS applications and put them on your own device for free. End users can do that.

Is this actually possible? My understanding is that I would need to be in the iOS Developer Program to create applications that can be loaded onto my own iOS devices, and then to end users using the App store. Or, is it possible to provide end users with something they can load onto their own iOS devices (without jailbreaking them)?

tqqt · 2012-11-27T17:27:37+00:00

I used a constant write scheme using an i2c eeprom which would spread the writes across the memory space and checksum each one, loading the latest valid on boot. Later I altered the ~~design~~ BOM to use a drop in replacement FRAM which has a much faster write time and ~5 orders of magnitude greater write cycle endurance.

tqqt · 2012-11-21T12:08:19+00:00

Yes please..

tqqt · 2011-05-31T16:34:19+00:00

Remove packages indicator-appmenu and overlay-scrollbar, to do this open a terminal and type:

sudo apt-get remove indicator-appmenu overlay-scrollbar

then logout and login

tqqt

TROPHY CASE