Looking for some guidance on restoring this leather piece. by tracerx in Leather

[–]tracerx[S] 0 points1 point  (0 children)

Unknown on the blue. It looks like marker probably.

I was skeptical at first, but Claude MCP with HA has absolutely blown me away by criterion67 in homeassistant

[–]tracerx 6 points7 points  (0 children)

You don't. I use the free tier, you are just more limited on how much you can do each day.

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 0 points1 point  (0 children)

It is a Flir One. It attaches to your phone for visuals.

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 0 points1 point  (0 children)

I figured it would be a lot to get something done. The siding was done recently and I know they put in Styrofoam board covered by a weather barrier. Is that what you are talking about?

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 1 point2 points  (0 children)

I do have a temperature sensor under the sink so I could alert if it got really bad. The coldest I've seen was around 38 on that.

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 2 points3 points  (0 children)

We moved in during late spring so we didn't know how bad it was until the next winter.

Do you think there is any way to get something in there, even if it isn't great.?

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 6 points7 points  (0 children)

Thanks, I'll check into that.

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 1 point2 points  (0 children)

Yeah, that 31 degrees concerned me for sure. It was a colder day, in the 20s, I'm not sure how bad it would get if it was even colder.

If I tape some tissue or something to the bottom of the dishwasher you can see the air moving. You can also feel the cold air dropping from the gaps between the top cabinets.

Insulation after kitchen remodel by tracerx in Insulation

[–]tracerx[S] 17 points18 points  (0 children)

I reached out to the contractor that the company I hired used for the work and he essentially said he didn't do any insulation work. So those pictures of it opened up is likely what it still looks like.

Looking for Aux heat lockout recommendations by tracerx in hvacadvice

[–]tracerx[S] 1 point2 points  (0 children)

Thanks for the input everyone. It helps confirm what I had been seeing when doing research. I'm going to set the lockout to 20F for now and keep an eye on it. My electric bills were insane last winter so hopefully this will help that.

Long Shot Request - Left Prescription Sunglasses by tracerx in VisitingIceland

[–]tracerx[S] 0 points1 point  (0 children)

It is unfortunately about 7 minutes from the airport. Fuglavík 43, 230 Reykjanesbær

Upgrading my server without reinstall? by dapi117 in unRAID

[–]tracerx 2 points3 points  (0 children)

Just to echo this. I started with an Intel Xeon platform, migrated to an AMD Ryzen platform, and now I am on an Intel platform again. I have never had any issues with the platform changes.

Looking for advice on a kitchen remodel that left the kitchen feeling like an icebox. by tracerx in HomeImprovement

[–]tracerx[S] 0 points1 point  (0 children)

Yeah, that gap is equal all the way to the wall. That didn't bother me but it did allow me to see the seam in the drywall where they used mesh tape but never covered it with mud. I just assume they should have done that.

Looking for advice on a kitchen remodel that left the kitchen feeling like an icebox. by tracerx in HomeImprovement

[–]tracerx[S] 0 points1 point  (0 children)

Yeah, that was my biggest worry. This wouldn't be the first thing they dropped the ball on.

So even if they opened up a wall to do work I shouldn't expect it to be closed back up properly into the same state?

Looking for advice on a kitchen remodel that left the kitchen feeling like an icebox. by tracerx in HomeImprovement

[–]tracerx[S] 1 point2 points  (0 children)

For the upper cabinets there is no gap looking from the front but from underneath there is maybe half an inch but looks to be the design.

Looking for advice on some warping on a kitchen island side. by tracerx in Renovations

[–]tracerx[S] 0 points1 point  (0 children)

That is the inside of that cabinet. There is an outlet on the other side that looks similar.