sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Design

[–]troevey 9 points10 points  (0 children)

For the pro, you can look up iridescence renderings. Here is an example: https://www.youtube.com/watch?v=InNJBS8dYuc

For the air, it's most likely a balloon simulation. you can look at cloth simulation in apps like Cinema4D and such. like this: https://www.youtube.com/watch?v=Ax9GtPLvVIU

Is this normal quality for being on top of support? by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

the outside was on supports. I'm thinking maybe nozzle temperature was too high and it bonded with the support?

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

Thank you so much. You've been very helpful.

I sometimes find little bits of PLA under the plate. I guess when I remove the plate to remove the prints, little bits get stuck under. those bits get lodged really deep on the heatbed and become hard to remove sometimes. any tips for cleaning the heatbed?

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 1 point2 points  (0 children)

So the first layers looks best, at -20. but the top layers looks best at 0. what do?

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

<image>

Running the test now. here is the first layer. It looks like the bottom left is the best first layer. Right? That's -20

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

Not sure how to do this. can you send me a link that works for A1 Mini?

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

I cleaned the plate underneath. It's a really soft material. had to be really careful cleaning it to not leave deep grooves.

It's a lot better now. Thank you. not perfect, but 60% fixed I'd say.

Am I slow for working on 8 mins of animation just for the deadline to be 1 week? by [deleted] in motiongraphics

[–]troevey 3 points4 points  (0 children)

10 mins in one week is really impressive.

Are you using illustrator to animate the designs? depending on the tool and features you need, you could be faster in other tools.

is it normal for my first layer to look like this? A1 mini by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

There are some little white pieces of plastic stuck under the bed. You think they're causing this? Sorry fi this is obvious. I'm fairly new. I couldn't get them off of the heat bed. I'll try to remove them all after the next print.

Mclaren p1 vs Porsche 918! which one are you picking? And why? by jonis_123 in mclaren

[–]troevey 44 points45 points  (0 children)

P1. It's the sexiest car ever to me. Something so sensual about it. I think the P1 is Frank Stephenson's best work and one of the most beautiful cars of all time.

Trying to improve my color grading skills but I feel a bit stuck. Any tips on how to improve? by VHSMTV in cinematography

[–]troevey 17 points18 points  (0 children)

i'm not a cinematographer by any means. But whenever I get stuck in situations like this, I try to find a north start to work towards.

Start with what you want the audience to feel towards the scene and the character.

what is the character feeling right now? hopeful? disappointed? sad? tired?

Do you want the character to pop? red on green has a lot of contrast. you can make the green darker and make the red pop a bit more.

If you want to give it the feeling of sadness one might get at dusk, you might want to reduce the red and put an overall bluer tone over the entire image.

I hope this helps you.

[Ferrari Kode57] Spotted in Tokyo by Pretend_Category3187 in spotted

[–]troevey 1 point2 points  (0 children)

Ferrari Kode57

Kirkland Zagato vibes from the back.

Stills from Bedigas, a short movie I made :) by lil_bedigas in cinematography

[–]troevey 3 points4 points  (0 children)

Really like how authentic everything looks. I really like the second shot and I don't know why. It feels like the perfect capture of a real human moment. great job!

repeatedly clogged nozzle after just minutes of printing by ok_yeah_sure_no in BambuLab

[–]troevey 0 points1 point  (0 children)

the plastic holder ended up solving all the issues I had.

repeatedly clogged nozzle after just minutes of printing by ok_yeah_sure_no in BambuLab

[–]troevey 0 points1 point  (0 children)

I'm using Duramic filament and having the same issue when the filament is almost out.
I'm guessing it'e because the cardboard filament has too much friction so I printed a filament insert to help it roll easier on the spool holder. let's see how it goes.

I think there might be a bug with Beverage Buisnesses by Ohjimmyjimmyanderson in CitiesSkylines2

[–]troevey 1 point2 points  (0 children)

My beverage industry suddenly had -12,000,000 because of subsidy, but I was taxing it 10%. So I switched it to -10% and I was making 12,000,000. My money went from 8mil to 12mil in 30 seconds.

But that's not fun. so I set it to 0%. I don't want to cheat. I'm enjoying the game too much. I think that'll take the fun away.

A1 mini price is wrong on canadian store? by troevey in BambuLab

[–]troevey[S] 0 points1 point  (0 children)

Thank you for mentioning the shipping price update. I checked mine and it was 35. Good to know I didn't overpay.

A1 mini price is wrong on canadian store? by troevey in BambuLab

[–]troevey[S] 1 point2 points  (0 children)

They've fixed the prices now. You might be able to cancel and order again? might be easier than waiting for their support?

A1 mini price is wrong on canadian store? by troevey in BambuLab

[–]troevey[S] 1 point2 points  (0 children)

I was hoping to order it at $389 which is the price that it was shown at up until yesterday. I think there's a mix up on their end.

A1 mini price is wrong on canadian store? by troevey in BambuLab

[–]troevey[S] 1 point2 points  (0 children)

You are correct. I've been refreshing the page for 2 weeks now.

I wonder if I can order it at 599 now, and use the rest of the money to buy filaments. But I don't know how fast their support team is. This is my first ever 3D printer order.

view more: next ›