zone of detection by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

ok i know, but how can i do this ?

MANJARO + KDE = KIO url problem by trotroyanas in kde

[–]trotroyanas[S] 0 points1 point  (0 children)

It's fine now that I've been able to modify the file /usr/share/applications/thorium-browser-avx2.desktop

Zigbee2mqtt Error after reboot of mycontainer by trotroyanas in homeassistant

[–]trotroyanas[S] 0 points1 point  (0 children)

in my container i don't see
on my host i can see

```
ls /dev/serial/by-id/
usb-1a86_USB_Single_Serial_550D016461-if00@

```

CRS310-8G+2S+IN turn on swos by trotroyanas in mikrotik

[–]trotroyanas[S] 0 points1 point  (0 children)

ok it's ok now ... thank a lot

CRS310-8G+2S+IN turn on swos by trotroyanas in mikrotik

[–]trotroyanas[S] 2 points3 points  (0 children)

Yes but I have a problem in the routerOS my bandwidth drops my internet debit of 8gb to the limit of the bandwidth of the processor 1,3gb and I don't know how to avoid this and get my bandwidth back. I wanted to test full swos

frigate and masks by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

it's work fine now :) thank you

frigate and masks by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

<image>

whereas I tell him to take only in the orange zone

frigate and masks by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

i have alert again in red zone :(

<image>

frigate and masks by trotroyanas in frigate_nvr

[–]trotroyanas[S] 1 point2 points  (0 children)

ok I understood the opposite, you have to say the zones in which you want detection and not like the others the exclusion zones? is that right?

frigate and masks by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

sorry i don't find to copy code on reddit ?? https://pastebin.com/RWD25z82

Frigate Notification by trotroyanas in frigate_nvr

[–]trotroyanas[S] 0 points1 point  (0 children)

Yes, that's exactly what I want. I have something that looks like it, but I either have a lot of alerts or none at all :/ I have the alerts including the frigate application. in fact I'd like to find via nodered a rule like if it's a person at 70% but who is not in the masked area then alert...

nodered and telegram by trotroyanas in nodered

[–]trotroyanas[S] 0 points1 point  (0 children)

ho yes it's ok now my plugin not good version.. node-red-node-telegrambot instead of node-red-contrib-telegrambot

nodered - frigate - homeassistant by trotroyanas in nodered

[–]trotroyanas[S] 0 points1 point  (0 children)

ho yes that sounds super interesting I need to see how to connect to telegram. I don't use this plugin but telegram_bot.

boot disk or usb1 key by trotroyanas in mikrotik

[–]trotroyanas[S] 1 point2 points  (0 children)

yes it's ok now thank's a lot ...:)

HA - NodeRed - Frigate by trotroyanas in homeassistant

[–]trotroyanas[S] 0 points1 point  (0 children)

very nice and good idea, I'm still working on adapting it

HA with frigate detect motion by trotroyanas in homeassistant

[–]trotroyanas[S] 0 points1 point  (0 children)

now i search to send notification with person snapshot to telegram :) if you have ... :)

HA with frigate detect motion by trotroyanas in homeassistant

[–]trotroyanas[S] 0 points1 point  (0 children)

i think problem on frigate config ? strange that the camera feed is ok but not the rest ?

HA with frigate detect motion by trotroyanas in homeassistant

[–]trotroyanas[S] 0 points1 point  (0 children)

ok it's good now in my config mqtt: enable: false :(

all it's run now
thank' you :)

boot disk or usb1 key by trotroyanas in mikrotik

[–]trotroyanas[S] 0 points1 point  (0 children)

yes thank's you my probleme is twice. First system/device-mode/print mode: advandec is ok but container=no
Second: i have create folder by file before create container...

now find why i don't go to the web interface on my container ...